11 commits

Author	SHA1	Message	Date
Johan Berglund	c2d429c3f7	* AUTOCAL is available for each ADJUST menu page. With cursor on THR or MAX bar, press UP and DOWN buttons at the same time (and keep off the sensors being calibrated). AUTOCAL will be displayed for two seconds, then updated settings will be shown. ... [removed for now - needs work] * Experimental breath controlled harmonic series (BRTH HARM and BR HM SEL settings). Like the lip sensor harmonics function, this shifts the fingered note up the harmonic series. For improved switching speed, try turning down the key deglitch time. (If this function is to be kept, I will probably need to tweak it quite a bit. Tongueing into higher notes and releasing them does not work well currently.)	2020-08-21 07:49:36 +02:00
Johan Berglund	b9a8742fc1	NuEVI and NuRAD: Timing and speed issue solved - SSD1306 display library needed editing to prevent it from lowering I2C bus speed. Added setting to enable/disable the on the fly key switching. NuRAD: Changed touch sensor reading equalisation from offset to multiplier to improve coherence of readings.	2020-07-22 13:24:56 +02:00
Johan Berglund	9a2e6b002f	Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B).	2020-04-27 11:19:08 +02:00
Johan Berglund	0f65c0d3d8	Added fingerings for NuRAD - SAX, EVI, EVR and EWX. Added setting for extra pinky key (NuRAD). Fix for quickpatch function (NuEVI/NuRAD). Rotator menu moved to main menu (NuEVI/NuRAD). Activation of legacy patch selection and settings now only done in extras menu. Changed zero setting in rotator to set rotators off and move on to next one (you can now rotate between 2-4 notes or set to static chord or interval). Changed order of some menu items.	2020-03-17 13:31:34 +01:00
Johan Berglund	4decdf1d72	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
John Stäck	4df0bf068c	More stale code removal	2019-06-25 13:42:41 +02:00
John Stäck	416b2a1730	Restructure and clarify defined constants	2019-06-25 13:42:22 +02:00
John Stäck	549c2797b0	Use pin names rather than hardcoding	2019-06-25 13:42:22 +02:00
John Stäck	d04c0f92f8	Use TEENSYDUINO to determine version rather than making our own	2019-06-24 15:00:42 +02:00
Johan Berglund	37c77356d5	Added way to enter regular menu instead of rotator menu (touch special key) if touch sensing is set too high. Added support for pneumatic bite sensing (add-on board). Experimental pitch CV out for built-in add-on CV scaler board (#define CVSCALEBOARD). LED brightness fix.	2019-03-21 09:15:28 +01:00
John Stäck	e388248c7c	Move all source files to subdirectory to be less confusing for Arduino IDE	2019-03-04 10:16:58 +01:00

Renamed from hardware.h (Browse further)