ee438c200d
* Glide setting SWO, SWitching Only, sending only Glide on/off (CC#65) for use with synths where glide rate CC#5 is used in non standard ways, for example some DSI/Sequential synths like the Prophet REV2 or Prophet 12 where glide rates are set individually for each oscillator. * Glide limit setting for portamento. Doubles as setting for portamento level sent using pinky key/mod key in GLD mode. (Can be changed both in menu and in GLD mode.) * Setting of level for LVL, LVP and GLD now reqires touching both pinky/mod and third trill/RHp3 for setting mode activation, this to avoid accidental change of setting when pinky/mod key is touched. * Rate of setting movement up and down for LVL, LVP and GLD has been adjusted. Became very much too fast after the timing issues were solved in 1.5b1 * A short delay before note offs in legato transitions is added to make playback of recorded midi behave correctly (keeping note on and note off from being registered on the same timestamp).
56 lines
1.7 KiB
C
56 lines
1.7 KiB
C
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
|
|
// Compile options, comment/uncomment to change
|
|
|
|
#define FIRMWARE_VERSION "1.5b2" // FIRMWARE VERSION NUMBER HERE <<<<<<<<<<<<<<<<<<<<<<<
|
|
|
|
#define ON_Delay 20 // Set Delay after ON threshold before velocity is checked (wait for tounging peak)
|
|
#define CCN_Port 5 // Controller number for portamento level
|
|
#define CCN_PortOnOff 65// Controller number for portamento on/off
|
|
#define CCN_PortSE02 9 // Controller number for portamento type on Roland SE-02
|
|
|
|
// Send breath CC data no more than every CC_BREATH_INTERVAL
|
|
// milliseconds
|
|
#define CC_BREATH_INTERVAL 5
|
|
#define SLOW_MIDI_ADD 7
|
|
#define CC_INTERVAL 13
|
|
#define CC_INTERVAL2 19
|
|
#define CC_INTERVAL3 37
|
|
#define LVL_TIMER_INTERVAL 15
|
|
#define CVPORTATUNE 2
|
|
|
|
|
|
#define breathLoLimit 0
|
|
#define breathHiLimit 4095
|
|
#define portamLoLimit 700
|
|
#define portamHiLimit 4700
|
|
#define pitchbLoLimit 500
|
|
#define pitchbHiLimit 4000
|
|
#define extracLoLimit 500
|
|
#define extracHiLimit 4000
|
|
#define ctouchLoLimit 50
|
|
#define ctouchHiLimit 350
|
|
#define ttouchLoLimit 50
|
|
#define ttouchHiLimit 1900
|
|
#define leverLoLimit 1400
|
|
#define leverHiLimit 2000
|
|
|
|
|
|
#define MIN_LED_BRIGHTNESS 5 // lowest PWM value that still is visible
|
|
#define BREATH_LED_BRIGHTNESS 600 // up to 4095, PWM
|
|
#define PORTAM_LED_BRIGHTNESS 300 // up to 4095, PWM
|
|
#define EXTCON_LED_BRIGHTNESS 300 // up to 4095, PWM
|
|
#define SPCKEY_LED_BRIGHTNESS 700 // up to 4095, PWM
|
|
|
|
#define ALK_BAT_FULL 2800 // about 4.6V
|
|
#define NMH_BAT_FULL 2350 // about 3.8V
|
|
#define LIP_BAT_FULL 2550 // about 4.2V
|
|
#define ALK_BAT_LOW 2300 // about 3.8V
|
|
#define NMH_BAT_LOW 2200 // about 3.6V
|
|
#define LIP_BAT_LOW 2250 // about 3.7V
|
|
|
|
|
|
#endif
|