brian/xevi
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Simple simulation code

Browse source 
Builds a native program on MacOS that runs the NuEVI firmware compiled for x86_64.
Only input is arrow keys for menu buttons for now. Only output is console and display.

Copied some more library files into the simulation folder, and renamed the modified *.cpp files from the libraries to *_sim.cpp.
This commit is contained in:
Mikael Degerfält 2019-06-06 21:13:07 +02:00
parent c9123b746f
commit 266b3334cb
30 changed files with 8532 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

730
simulation/src/Adafruit_SSD1306_sim.cpp Normal file
View file

@ -0,0 +1,730 @@
/*!
* @file Adafruit_SSD1306.cpp
*
* @mainpage Arduino library for monochrome OLEDs based on SSD1306 drivers.
*
* @section intro_sec Introduction
*
* This is documentation for Adafruit's SSD1306 library for monochrome
* OLED displays: http://www.adafruit.com/category/63_98
*
* These displays use I2C or SPI to communicate. I2C requires 2 pins
* (SCL+SDA) and optionally a RESET pin. SPI requires 4 pins (MOSI, SCK,
* select, data/command) and optionally a reset pin. Hardware SPI or
* 'bitbang' software SPI are both supported.
*
* Adafruit invests time and resources providing this open source code,
* please support Adafruit and open-source hardware by purchasing
* products from Adafruit!
*
* @section dependencies Dependencies
*
* This library depends on <a href="https://github.com/adafruit/Adafruit-GFX-Library">
* Adafruit_GFX</a> being present on your system. Please make sure you have
* installed the latest version before using this library.
*
* @section author Author
*
* Written by Limor Fried/Ladyada for Adafruit Industries, with
* contributions from the open source community.
*
* @section license License
*
* BSD license, all text above, and the splash screen included below,
* must be included in any redistribution.
*
*/
// #ifdef __AVR__
// #include <avr/pgmspace.h>
// #elif defined(ESP8266) || defined(ESP32)
// #include <pgmspace.h>
// #else
#define pgm_read_byte(addr) \
(*(const unsigned char *)(addr)) ///< PROGMEM workaround for non-AVR
// #endif
// #if !defined(__ARM_ARCH) && !defined(ENERGIA) && !defined(ESP8266) && !defined(ESP32) && !defined(__arc__)
// #include <util/delay.h>
// #endif
#include <Adafruit_GFX.h>
#include "Adafruit_SSD1306.h"
// SOME DEFINES AND STATIC VARIABLES USED INTERNALLY -----------------------
// #if defined(BUFFER_LENGTH)
// #define WIRE_MAX BUFFER_LENGTH ///< AVR or similar Wire lib
// #elif defined(SERIAL_BUFFER_SIZE)
// #define WIRE_MAX (SERIAL_BUFFER_SIZE-1) ///< Newer Wire uses RingBuffer
// #else
// #define WIRE_MAX 32 ///< Use common Arduino core default
// #endif
#define ssd1306_swap(a, b) \
(((a) ^= (b)), ((b) ^= (a)), ((a) ^= (b))) ///< No-temp-var swap operation
// #if ARDUINO >= 100
// #define WIRE_WRITE wire->write ///< Wire write function in recent Arduino lib
// #else
// #define WIRE_WRITE wire->send ///< Wire write function in older Arduino lib
// #endif
// #ifdef HAVE_PORTREG
// #define SSD1306_SELECT *csPort &= ~csPinMask; ///< Device select
// #define SSD1306_DESELECT *csPort |= csPinMask; ///< Device deselect
// #define SSD1306_MODE_COMMAND *dcPort &= ~dcPinMask; ///< Command mode
// #define SSD1306_MODE_DATA *dcPort |= dcPinMask; ///< Data mode
// #else
// #define SSD1306_SELECT digitalWrite(csPin, LOW); ///< Device select
// #define SSD1306_DESELECT digitalWrite(csPin, HIGH); ///< Device deselect
// #define SSD1306_MODE_COMMAND digitalWrite(dcPin, LOW); ///< Command mode
// #define SSD1306_MODE_DATA digitalWrite(dcPin, HIGH); ///< Data mode
// #endif
// #if (ARDUINO >= 157) && !defined(ARDUINO_STM32_FEATHER)
// #define SETWIRECLOCK wire->setClock(wireClk) ///< Set before I2C transfer
// #define RESWIRECLOCK wire->setClock(restoreClk) ///< Restore after I2C xfer
// #else // setClock() is not present in older Arduino Wire lib (or WICED)
// #define SETWIRECLOCK ///< Dummy stand-in define
// #define RESWIRECLOCK ///< keeps compiler happy
// #endif
// #if defined(SPI_HAS_TRANSACTION)
// #define SPI_TRANSACTION_START spi->beginTransaction(spiSettings) ///< Pre-SPI
// #define SPI_TRANSACTION_END spi->endTransaction() ///< Post-SPI
// #else // SPI transactions likewise not present in older Arduino SPI lib
// #define SPI_TRANSACTION_START ///< Dummy stand-in define
// #define SPI_TRANSACTION_END ///< keeps compiler happy
// #endif
// The definition of 'transaction' is broadened a bit in the context of
// this library -- referring not just to SPI transactions (if supported
// in the version of the SPI library being used), but also chip select
// (if SPI is being used, whether hardware or soft), and also to the
// beginning and end of I2C transfers (the Wire clock may be sped up before
// issuing data to the display, then restored to the default rate afterward
// so other I2C device types still work). All of these are encapsulated
// in the TRANSACTION_* macros.
// Check first if Wire, then hardware SPI, then soft SPI:
// #define TRANSACTION_START \
// if(wire) { \
// SETWIRECLOCK; \
// } else { \
// if(spi) { \
// SPI_TRANSACTION_START; \
// } \
// SSD1306_SELECT; \
// } ///< Wire, SPI or bitbang transfer setup
// #define TRANSACTION_END \
// if(wire) { \
// RESWIRECLOCK; \
// } else { \
// SSD1306_DESELECT; \
// if(spi) { \
// SPI_TRANSACTION_END; \
// } \
// } ///< Wire, SPI or bitbang transfer end
// CONSTRUCTORS, DESTRUCTOR ------------------------------------------------
/*!
@brief Constructor for I2C-interfaced SSD1306 displays.
@param w
Display width in pixels
@param h
Display height in pixels
@param twi
Pointer to an existing TwoWire instance (e.g. &Wire, the
microcontroller's primary I2C bus).
@param rst_pin
Reset pin (using Arduino pin numbering), or -1 if not used
(some displays might be wired to share the microcontroller's
reset pin).
@param clkDuring
Speed (in Hz) for Wire transmissions in SSD1306 library calls.
Defaults to 400000 (400 KHz), a known 'safe' value for most
microcontrollers, and meets the SSD1306 datasheet spec.
Some systems can operate I2C faster (800 KHz for ESP32, 1 MHz
for many other 32-bit MCUs), and some (perhaps not all)
SSD1306's can work with this -- so it's optionally be specified
here and is not a default behavior. (Ignored if using pre-1.5.7
Arduino software, which operates I2C at a fixed 100 KHz.)
@param clkAfter
Speed (in Hz) for Wire transmissions following SSD1306 library
calls. Defaults to 100000 (100 KHz), the default Arduino Wire
speed. This is done rather than leaving it at the 'during' speed
because other devices on the I2C bus might not be compatible
with the faster rate. (Ignored if using pre-1.5.7 Arduino
software, which operates I2C at a fixed 100 KHz.)
@return Adafruit_SSD1306 object.
@note Call the object's begin() function before use -- buffer
allocation is performed there!
*/
Adafruit_SSD1306::Adafruit_SSD1306(uint8_t w, uint8_t h, TwoWire *twi,
int8_t rst_pin, uint32_t clkDuring, uint32_t clkAfter) :
Adafruit_GFX(w, h), spi(NULL), wire(twi), buffer(NULL),
mosiPin(-1), clkPin(-1), dcPin(-1), csPin(-1), rstPin(rst_pin),
wireClk(clkDuring), restoreClk(clkAfter)
{
}
/*!
@brief Constructor for SPI SSD1306 displays, using software (bitbang)
SPI.
@param w
Display width in pixels
@param h
Display height in pixels
@param mosi_pin
MOSI (master out, slave in) pin (using Arduino pin numbering).
This transfers serial data from microcontroller to display.
@param sclk_pin
SCLK (serial clock) pin (using Arduino pin numbering).
This clocks each bit from MOSI.
@param dc_pin
Data/command pin (using Arduino pin numbering), selects whether
display is receiving commands (low) or data (high).
@param rst_pin
Reset pin (using Arduino pin numbering), or -1 if not used
(some displays might be wired to share the microcontroller's
reset pin).
@param cs_pin
Chip-select pin (using Arduino pin numbering) for sharing the
bus with other devices. Active low.
@return Adafruit_SSD1306 object.
@note Call the object's begin() function before use -- buffer
allocation is performed there!
*/
Adafruit_SSD1306::Adafruit_SSD1306(uint8_t w, uint8_t h,
int8_t mosi_pin, int8_t sclk_pin, int8_t dc_pin, int8_t rst_pin,
int8_t cs_pin) : Adafruit_GFX(w, h), spi(NULL), wire(NULL), buffer(NULL),
mosiPin(mosi_pin), clkPin(sclk_pin), dcPin(dc_pin), csPin(cs_pin),
rstPin(rst_pin) {
}
/*!
@brief Constructor for SPI SSD1306 displays, using native hardware SPI.
@param w
Display width in pixels
@param h
Display height in pixels
@param spi
Pointer to an existing SPIClass instance (e.g. &SPI, the
microcontroller's primary SPI bus).
@param dc_pin
Data/command pin (using Arduino pin numbering), selects whether
display is receiving commands (low) or data (high).
@param rst_pin
Reset pin (using Arduino pin numbering), or -1 if not used
(some displays might be wired to share the microcontroller's
reset pin).
@param cs_pin
Chip-select pin (using Arduino pin numbering) for sharing the
bus with other devices. Active low.
@param bitrate
SPI clock rate for transfers to this display. Default if
unspecified is 8000000UL (8 MHz).
@return Adafruit_SSD1306 object.
@note Call the object's begin() function before use -- buffer
allocation is performed there!
*/
Adafruit_SSD1306::Adafruit_SSD1306(uint8_t w, uint8_t h, SPIClass *spi,
int8_t dc_pin, int8_t rst_pin, int8_t cs_pin, uint32_t __attribute__((unused)) bitrate) :
Adafruit_GFX(w, h), spi(spi), wire(NULL), buffer(NULL),
mosiPin(-1), clkPin(-1), dcPin(dc_pin), csPin(cs_pin), rstPin(rst_pin) {
#ifdef SPI_HAS_TRANSACTION
spiSettings = SPISettings(bitrate, MSBFIRST, SPI_MODE0);
#endif
}
/*!
@brief Destructor for Adafruit_SSD1306 object.
*/
Adafruit_SSD1306::~Adafruit_SSD1306(void) {
if(buffer) {
free(buffer);
buffer = NULL;
}
}
// LOW-LEVEL UTILS ---------------------------------------------------------
// ALLOCATE & INIT DISPLAY -------------------------------------------------
/*!
@brief Allocate RAM for image buffer, initialize peripherals and pins.
@param vcs
VCC selection. Pass SSD1306_SWITCHCAPVCC to generate the display
voltage (step up) from the 3.3V source, or SSD1306_EXTERNALVCC
otherwise. Most situations with Adafruit SSD1306 breakouts will
want SSD1306_SWITCHCAPVCC.
@param addr
I2C address of corresponding SSD1306 display (or pass 0 to use
default of 0x3C for 128x32 display, 0x3D for all others).
SPI displays (hardware or software) do not use addresses, but
this argument is still required (pass 0 or any value really,
it will simply be ignored). Default if unspecified is 0.
@param reset
If true, and if the reset pin passed to the constructor is
valid, a hard reset will be performed before initializing the
display. If using multiple SSD1306 displays on the same bus, and
if they all share the same reset pin, you should only pass true
on the first display being initialized, false on all others,
else the already-initialized displays would be reset. Default if
unspecified is true.
@param periphBegin
If true, and if a hardware peripheral is being used (I2C or SPI,
but not software SPI), call that peripheral's begin() function,
else (false) it has already been done in one's sketch code.
Cases where false might be used include multiple displays or
other devices sharing a common bus, or situations on some
platforms where a nonstandard begin() function is available
(e.g. a TwoWire interface on non-default pins, as can be done
on the ESP8266 and perhaps others).
@return true on successful allocation/init, false otherwise.
Well-behaved code should check the return value before
proceeding.
@note MUST call this function before any drawing or updates!
*/
boolean Adafruit_SSD1306::begin(uint8_t __attribute__((unused)) vcs, uint8_t __attribute__((unused)) addr, boolean __attribute__((unused)) reset,
boolean __attribute__((unused)) periphBegin) {
if((!buffer) && !(buffer = (uint8_t *)malloc(WIDTH * ((HEIGHT + 7) / 8))))
return false;
enabled_ = true;
clearDisplay();
// if(HEIGHT > 32) {
// drawBitmap((WIDTH - splash1_width) / 2, (HEIGHT - splash1_height) / 2,
// splash1_data, splash1_width, splash1_height, 1);
// } else {
// drawBitmap((WIDTH - splash2_width) / 2, (HEIGHT - splash2_height) / 2,
// splash2_data, splash2_width, splash2_height, 1);
// }
return true; // Success
}
// DRAWING FUNCTIONS -------------------------------------------------------
/*!
@brief Set/clear/invert a single pixel. This is also invoked by the
Adafruit_GFX library in generating many higher-level graphics
primitives.
@param x
Column of display -- 0 at left to (screen width - 1) at right.
@param y
Row of display -- 0 at top to (screen height -1) at bottom.
@param color
Pixel color, one of: BLACK, WHITE or INVERT.
@return None (void).
@note Changes buffer contents only, no immediate effect on display.
Follow up with a call to display(), or with other graphics
commands as needed by one's own application.
*/
void Adafruit_SSD1306::drawPixel(int16_t x, int16_t y, uint16_t color) {
if((x >= 0) && (x < width()) && (y >= 0) && (y < height())) {
// Pixel is in-bounds. Rotate coordinates if needed.
switch(getRotation()) {
case 1:
ssd1306_swap(x, y);
x = WIDTH - x - 1;
break;
case 2:
x = WIDTH - x - 1;
y = HEIGHT - y - 1;
break;
case 3:
ssd1306_swap(x, y);
y = HEIGHT - y - 1;
break;
}
switch(color) {
case WHITE: buffer[x + (y/8)*WIDTH] |= (1 << (y&7)); break;
case BLACK: buffer[x + (y/8)*WIDTH] &= ~(1 << (y&7)); break;
case INVERSE: buffer[x + (y/8)*WIDTH] ^= (1 << (y&7)); break;
}
}
}
/*!
@brief Clear contents of display buffer (set all pixels to off).
@return None (void).
@note Changes buffer contents only, no immediate effect on display.
Follow up with a call to display(), or with other graphics
commands as needed by one's own application.
*/
void Adafruit_SSD1306::clearDisplay(void) {
memset(buffer, 0, WIDTH * ((HEIGHT + 7) / 8));
}
/*!
@brief Draw a horizontal line. This is also invoked by the Adafruit_GFX
library in generating many higher-level graphics primitives.
@param x
Leftmost column -- 0 at left to (screen width - 1) at right.
@param y
Row of display -- 0 at top to (screen height -1) at bottom.
@param w
Width of line, in pixels.
@param color
Line color, one of: BLACK, WHITE or INVERT.
@return None (void).
@note Changes buffer contents only, no immediate effect on display.
Follow up with a call to display(), or with other graphics
commands as needed by one's own application.
*/
void Adafruit_SSD1306::drawFastHLine(
int16_t x, int16_t y, int16_t w, uint16_t color) {
boolean bSwap = false;
switch(rotation) {
case 1:
// 90 degree rotation, swap x & y for rotation, then invert x
bSwap = true;
ssd1306_swap(x, y);
x = WIDTH - x - 1;
break;
case 2:
// 180 degree rotation, invert x and y, then shift y around for height.
x = WIDTH - x - 1;
y = HEIGHT - y - 1;
x -= (w-1);
break;
case 3:
// 270 degree rotation, swap x & y for rotation,
// then invert y and adjust y for w (not to become h)
bSwap = true;
ssd1306_swap(x, y);
y = HEIGHT - y - 1;
y -= (w-1);
break;
}
if(bSwap) drawFastVLineInternal(x, y, w, color);
else drawFastHLineInternal(x, y, w, color);
}
void Adafruit_SSD1306::drawFastHLineInternal(
int16_t x, int16_t y, int16_t w, uint16_t color) {
if((y >= 0) && (y < HEIGHT)) { // Y coord in bounds?
if(x < 0) { // Clip left
w += x;
x = 0;
}
if((x + w) > WIDTH) { // Clip right
w = (WIDTH - x);
}
if(w > 0) { // Proceed only if width is positive
uint8_t *pBuf = &buffer[(y / 8) * WIDTH + x],
mask = 1 << (y & 7);
switch(color) {
case WHITE: while(w--) { *pBuf++ |= mask; }; break;
case BLACK: mask = ~mask; while(w--) { *pBuf++ &= mask; }; break;
case INVERSE: while(w--) { *pBuf++ ^= mask; }; break;
}
}
}
}
/*!
@brief Draw a vertical line. This is also invoked by the Adafruit_GFX
library in generating many higher-level graphics primitives.
@param x
Column of display -- 0 at left to (screen width -1) at right.
@param y
Topmost row -- 0 at top to (screen height - 1) at bottom.
@param h
Height of line, in pixels.
@param color
Line color, one of: BLACK, WHITE or INVERT.
@return None (void).
@note Changes buffer contents only, no immediate effect on display.
Follow up with a call to display(), or with other graphics
commands as needed by one's own application.
*/
void Adafruit_SSD1306::drawFastVLine(
int16_t x, int16_t y, int16_t h, uint16_t color) {
boolean bSwap = false;
switch(rotation) {
case 1:
// 90 degree rotation, swap x & y for rotation,
// then invert x and adjust x for h (now to become w)
bSwap = true;
ssd1306_swap(x, y);
x = WIDTH - x - 1;
x -= (h-1);
break;
case 2:
// 180 degree rotation, invert x and y, then shift y around for height.
x = WIDTH - x - 1;
y = HEIGHT - y - 1;
y -= (h-1);
break;
case 3:
// 270 degree rotation, swap x & y for rotation, then invert y
bSwap = true;
ssd1306_swap(x, y);
y = HEIGHT - y - 1;
break;
}
if(bSwap) drawFastHLineInternal(x, y, h, color);
else drawFastVLineInternal(x, y, h, color);
}
void Adafruit_SSD1306::drawFastVLineInternal(
int16_t x, int16_t __y, int16_t __h, uint16_t color) {
if((x >= 0) && (x < WIDTH)) { // X coord in bounds?
if(__y < 0) { // Clip top
__h += __y;
__y = 0;
}
if((__y + __h) > HEIGHT) { // Clip bottom
__h = (HEIGHT - __y);
}
if(__h > 0) { // Proceed only if height is now positive
// this display doesn't need ints for coordinates,
// use local byte registers for faster juggling
uint8_t y = __y, h = __h;
uint8_t *pBuf = &buffer[(y / 8) * WIDTH + x];
// do the first partial byte, if necessary - this requires some masking
uint8_t mod = (y & 7);
if(mod) {
// mask off the high n bits we want to set
mod = 8 - mod;
// note - lookup table results in a nearly 10% performance
// improvement in fill* functions
// uint8_t mask = ~(0xFF >> mod);
static const uint8_t PROGMEM premask[8] =
{ 0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC, 0xFE };
uint8_t mask = pgm_read_byte(&premask[mod]);
// adjust the mask if we're not going to reach the end of this byte
if(h < mod) mask &= (0XFF >> (mod - h));
switch(color) {
case WHITE: *pBuf |= mask; break;
case BLACK: *pBuf &= ~mask; break;
case INVERSE: *pBuf ^= mask; break;
}
pBuf += WIDTH;
}
if(h >= mod) { // More to go?
h -= mod;
// Write solid bytes while we can - effectively 8 rows at a time
if(h >= 8) {
if(color == INVERSE) {
// separate copy of the code so we don't impact performance of
// black/white write version with an extra comparison per loop
do {
*pBuf ^= 0xFF; // Invert byte
pBuf += WIDTH; // Advance pointer 8 rows
h -= 8; // Subtract 8 rows from height
} while(h >= 8);
} else {
// store a local value to work with
uint8_t val = (color != BLACK) ? 255 : 0;
do {
*pBuf = val; // Set byte
pBuf += WIDTH; // Advance pointer 8 rows
h -= 8; // Subtract 8 rows from height
} while(h >= 8);
}
}
if(h) { // Do the final partial byte, if necessary
mod = h & 7;
// this time we want to mask the low bits of the byte,
// vs the high bits we did above
// uint8_t mask = (1 << mod) - 1;
// note - lookup table results in a nearly 10% performance
// improvement in fill* functions
static const uint8_t PROGMEM postmask[8] =
{ 0x00, 0x01, 0x03, 0x07, 0x0F, 0x1F, 0x3F, 0x7F };
uint8_t mask = pgm_read_byte(&postmask[mod]);
switch(color) {
case WHITE: *pBuf |= mask; break;
case BLACK: *pBuf &= ~mask; break;
case INVERSE: *pBuf ^= mask; break;
}
}
}
} // endif positive height
} // endif x in bounds
}
/*!
@brief Return color of a single pixel in display buffer.
@param x
Column of display -- 0 at left to (screen width - 1) at right.
@param y
Row of display -- 0 at top to (screen height -1) at bottom.
@return true if pixel is set (usually WHITE, unless display invert mode
is enabled), false if clear (BLACK).
@note Reads from buffer contents; may not reflect current contents of
screen if display() has not been called.
*/
boolean Adafruit_SSD1306::getPixel(int16_t x, int16_t y) {
if((x >= 0) && (x < width()) && (y >= 0) && (y < height())) {
// Pixel is in-bounds. Rotate coordinates if needed.
switch(getRotation()) {
case 1:
ssd1306_swap(x, y);
x = WIDTH - x - 1;
break;
case 2:
x = WIDTH - x - 1;
y = HEIGHT - y - 1;
break;
case 3:
ssd1306_swap(x, y);
y = HEIGHT - y - 1;
break;
}
return (buffer[x + (y / 8) * WIDTH] & (1 << (y & 7)));
}
return false; // Pixel out of bounds
}
/*!
@brief Get base address of display buffer for direct reading or writing.
@return Pointer to an unsigned 8-bit array, column-major, columns padded
to full byte boundary if needed.
*/
uint8_t *Adafruit_SSD1306::getBuffer(void) {
return buffer;
}
// REFRESH DISPLAY ---------------------------------------------------------
/*!
@brief Push data currently in RAM to SSD1306 display.
@return None (void).
@note Drawing operations are not visible until this function is
called. Call after each graphics command, or after a whole set
of graphics commands, as best needed by one's own application.
*/
void Adafruit_SSD1306::display(void) {
// TODO: Update SDL surface with content of `buffer`
}
// SCROLLING FUNCTIONS -----------------------------------------------------
/*!
@brief Activate a right-handed scroll for all or part of the display.
@param start
First row.
@param stop
Last row.
@return None (void).
*/
// To scroll the whole display, run: display.startscrollright(0x00, 0x0F)
void Adafruit_SSD1306::startscrollright(uint8_t __attribute__((unused)) start, uint8_t __attribute__((unused)) stop) {
// not used for now
}
/*!
@brief Activate a left-handed scroll for all or part of the display.
@param start
First row.
@param stop
Last row.
@return None (void).
*/
// To scroll the whole display, run: display.startscrollleft(0x00, 0x0F)
void Adafruit_SSD1306::startscrollleft(uint8_t __attribute__((unused)) start, uint8_t __attribute__((unused)) stop) {
// not used for now
}
/*!
@brief Activate a diagonal scroll for all or part of the display.
@param start
First row.
@param stop
Last row.
@return None (void).
*/
// display.startscrolldiagright(0x00, 0x0F)
void Adafruit_SSD1306::startscrolldiagright(uint8_t __attribute__((unused)) start, uint8_t __attribute__((unused)) stop) {
// not used for now
}
/*!
@brief Activate alternate diagonal scroll for all or part of the display.
@param start
First row.
@param stop
Last row.
@return None (void).
*/
// To scroll the whole display, run: display.startscrolldiagleft(0x00, 0x0F)
void Adafruit_SSD1306::startscrolldiagleft(uint8_t __attribute__((unused)) start, uint8_t __attribute__((unused)) stop) {
// not used for now
}
/*!
@brief Cease a previously-begun scrolling action.
@return None (void).
*/
void Adafruit_SSD1306::stopscroll(void) {
// not used for now
}
// OTHER HARDWARE SETTINGS -------------------------------------------------
/*!
@brief Enable or disable display invert mode (white-on-black vs
black-on-white).
@param i
If true, switch to invert mode (black-on-white), else normal
mode (white-on-black).
@return None (void).
@note This has an immediate effect on the display, no need to call the
display() function -- buffer contents are not changed, rather a
different pixel mode of the display hardware is used. When
enabled, drawing BLACK (value 0) pixels will actually draw white,
WHITE (value 1) will draw black.
*/
void Adafruit_SSD1306::invertDisplay(boolean i) {
// not used for now
inverted_ = i;
}
/*!
@brief Dim the display.
@param dim
true to enable lower brightness mode, false for full brightness.
@return None (void).
@note This has an immediate effect on the display, no need to call the
display() function -- buffer contents are not changed.
*/
void Adafruit_SSD1306::dim(boolean dim)
{
dimmed_ = dim;
}
void Adafruit_SSD1306::ssd1306_command(uint8_t cmd)
{
// TODO: parse command and act on it...
switch(cmd)
{
case SSD1306_DISPLAYOFF:
enabled_ = false;
break;
case SSD1306_DISPLAYON:
enabled_ = true;
break;
default: break;
}
}