C++ify midi.ino, change to appropriate datatypes

NuEVI/midi.cpp

@@ -1,10 +1,12 @@
+#include <Arduino.h>
+
 #include "midi.h"
 #include "hardware.h"
 
 int midiChannel;
 
 
-void midiSetChannel(byte channel) {
+void midiSetChannel(uint8_t channel) {
   midiChannel = constrain(channel, 1, 16);
 }
 
@@ -13,35 +15,35 @@ byte midiGetChannel() {
 }
 
 
-void midiSendProgramChange(int patch) {
+void midiSendProgramChange(uint8_t patch) {
 	usbMIDI.sendProgramChange(patch-1, midiChannel);
 	dinMIDIsendProgramChange(patch-1, midiChannel-1);
 }
 
-void midiSendControlChange(int ccParam, int ccValue) {
+void midiSendControlChange(uint8_t ccParam, uint8_t ccValue) {
       usbMIDI.sendControlChange(ccParam, ccValue, midiChannel);
       dinMIDIsendControlChange(ccParam, ccValue, midiChannel - 1);
 }
 
-void midiSendNoteOn(byte note, int velocity) {
+void midiSendNoteOn(uint8_t note, uint8_t velocity) {
   usbMIDI.sendNoteOn(note, velocity, midiChannel);
   dinMIDIsendNoteOn(note, velocity, midiChannel - 1);
 }
 
-void midiSendNoteOff(byte note) {
+void midiSendNoteOff(uint8_t note) {
   //Always send velocity 0 on note off to avoid confusing some synthesizers
   usbMIDI.sendNoteOn(note, 0, midiChannel);
   dinMIDIsendNoteOn(note, 0, midiChannel - 1);
 }
 
 
-void midiSendAfterTouch(byte value) {
+void midiSendAfterTouch(uint8_t value) {
   usbMIDI.sendAfterTouch(value, midiChannel);
   dinMIDIsendAfterTouch(value, midiChannel - 1);
 }
 
 
-void midiSendPitchBend(int value) {
+void midiSendPitchBend(uint16_t value) {
     #if defined(NEWTEENSYDUINO)
     usbMIDI.sendPitchBend(value-8192, midiChannel); // newer teensyduino "pitchBend-8192" older just "pitchBend"... strange thing to change
     #else
@@ -70,7 +72,7 @@ void midiPanic() { // all notes off
   }
 }
 
-void midiInitialize(byte channel) {
+void midiInitialize(uint8_t channel) {
   MIDI_SERIAL.begin(31250);   // start serial with midi baudrate 31250
   MIDI_SERIAL.flush();
   midiSetChannel(channel);
@@ -81,7 +83,7 @@ void midiInitialize(byte channel) {
 //Serial midi functions
 
 //  Send a three byte din midi message
-void midiSend3B(byte midistatus, byte data1, byte data2) {
+void midiSend3B(uint8_t midistatus, uint8_t data1, uint8_t data2) {
   MIDI_SERIAL.write(midistatus);
   MIDI_SERIAL.write(data1);
   MIDI_SERIAL.write(data2);
@@ -90,7 +92,7 @@ void midiSend3B(byte midistatus, byte data1, byte data2) {
 //**************************************************************
 
 //  Send a two byte din midi message
-void midiSend2B(byte midistatus, byte data) {
+void midiSend2B(uint8_t midistatus, uint8_t data) {
   MIDI_SERIAL.write(midistatus);
   MIDI_SERIAL.write(data);
 }
@@ -98,7 +100,7 @@ void midiSend2B(byte midistatus, byte data) {
 //**************************************************************
 
 //  Send din pitchbend
-void dinMIDIsendPitchBend(int pb, byte ch) {
+void dinMIDIsendPitchBend(uint16_t pb, uint8_t ch) {
     int pitchLSB = pb & 0x007F;
     int pitchMSB = (pb >>7) & 0x007F;
     midiSend3B((0xE0 | ch), pitchLSB, pitchMSB);
@@ -107,34 +109,34 @@ void dinMIDIsendPitchBend(int pb, byte ch) {
 //**************************************************************
 
 //  Send din control change
-void dinMIDIsendControlChange(byte ccNumber, int cc, byte ch) {
+void dinMIDIsendControlChange(uint8_t ccNumber, uint8_t cc, uint8_t ch) {
     midiSend3B((0xB0 | ch), ccNumber, cc);
 }
 
 //**************************************************************
 
 //  Send din note on
-void dinMIDIsendNoteOn(byte note, int vel, byte ch) {
+void dinMIDIsendNoteOn(uint8_t note, uint8_t vel, uint8_t ch) {
     midiSend3B((0x90 | ch), note, vel);
 }
 
 //**************************************************************
 
 //  Send din note off
-void dinMIDIsendNoteOff(byte note, int vel, byte ch) {
+void dinMIDIsendNoteOff(uint8_t note, uint8_t vel, uint8_t ch) {
     midiSend3B((0x80 | ch), note, vel);
 }
 
 //**************************************************************
 
 //  Send din aftertouch
-void dinMIDIsendAfterTouch(byte value, byte ch) {
+void dinMIDIsendAfterTouch(uint8_t value, uint8_t ch) {
     midiSend2B((0xD0 | ch), value);
 }
 
 //**************************************************************
 
 //  Send din program change
-void dinMIDIsendProgramChange(byte value, byte ch) {
+void dinMIDIsendProgramChange(uint8_t value, uint8_t ch) {
     midiSend2B((0xC0 | ch), value);
 }

NuEVI/midi.h

@@ -6,20 +6,27 @@
 #define USE_MIDI_SERIAL
 
 //Set / get current midi channel
-void midiSetChannel(byte channel);
-byte midiGetChannel();
+void midiSetChannel(uint8_t channel);
+uint8_t midiGetChannel();
 
-void midiSendProgramChange(int patch);
-void midiSendControlChange(int ccParam, int ccValue);
-void midiSendNoteOn(byte note, int velocity);
-void midiSendNoteOff(byte note);
-void midiSendAfterTouch(byte value);
-void midiSendPitchBend(int value);
+void midiSendProgramChange(uint8_t patch);
+void midiSendControlChange(uint8_t ccParam, uint8_t ccValue);
+void midiSendNoteOn(uint8_t note, uint8_t velocity);
+void midiSendNoteOff(uint8_t note);
+void midiSendAfterTouch(uint8_t value);
+void midiSendPitchBend(uint16_t value);
 
 void midiDiscardInput(void);
 void midiReset(); // reset controllers
 void midiPanic(); // turn all notes off
 
-void midiInitialize(byte channel=1);
+void midiInitialize(uint8_t channel=1);
+
+void dinMIDIsendControlChange(uint8_t ccNumber, uint8_t cc, uint8_t ch);
+void dinMIDIsendNoteOn(uint8_t note, uint8_t vel, uint8_t ch);
+void dinMIDIsendNoteOff(uint8_t note, uint8_t vel, uint8_t ch);
+void dinMIDIsendAfterTouch(uint8_t value, uint8_t ch);
+void dinMIDIsendProgramChange(uint8_t value, uint8_t ch);
+void dinMIDIsendPitchBend(uint16_t pb, uint8_t ch);
 
 #endif