diff --git a/NuEVI-audio/NuEVI-audio.ino b/NuEVI-audio/NuEVI-audio.ino new file mode 100644 index 0000000..a18d82e --- /dev/null +++ b/NuEVI-audio/NuEVI-audio.ino @@ -0,0 +1,5567 @@ +#include +#include +#include +#include +#include +#include +#include // for the breath signal LP filtering, https://github.com/edgar-bonet/Filters +#include +#include +#include + +/* +NAME: NuEVI +WRITTEN BY: JOHAN BERGLUND +DATE: 2018-04-19 +FILE SAVED AS: NuEVI.ino +FOR: PJRC Teensy 3.2 and a MPR121 capactive touch sensor board. + Uses an SSD1306 controlled OLED display communicating over I2C. +PROGRAMME FUNCTION: EVI Wind Controller using the Freescale MP3V5004GP breath sensor + and capacitive touch keys. Output to both USB MIDI and DIN MIDI. + +*/ + +//_______________________________________________________________________________________________ DECLARATIONS + +// Compile options, comment/uncomment to change + +#define REVB + + +// Pin definitions + +// Teensy pins + +#define specialKeyPin 0 // SK or S2 +#define halfPitchBendKeyPin 1 // PD or S1 + +#define bitePin 17 +#define extraPin 16 +#define pbUpPin 23 +#define pbDnPin 22 +#define vibratoPin 15 + +#define dPin 3 +#define ePin 4 +#define uPin 5 +#define mPin 6 + +#define bLedPin 10 +#define pLedPin 9 + +#define vMeterPin A11 + +#define PBD 12 + +#if defined(REVB) + +// MPR121 pins Rev B (angled pins at top edge for main keys and rollers) + +#define R1Pin 0 +#define R2Pin 2 +#define R3Pin 4 +#define R4Pin 6 +#define R5Pin 8 + +#define K4Pin 10 +#define K1Pin 1 +#define K2Pin 3 +#define K3Pin 5 +#define K5Pin 7 +#define K6Pin 9 +#define K7Pin 11 + +/* + * PINOUT ON PCB vs PINS ON MPR121 - Rev. B + * + * (R1) (R2) (R3/6) (R4) (R5) (K4) <-> (00) (02) (04) (06) (08) (10) + * + * (K1) (K2) (K3) (K5) (K6) (K7) <-> (01) (03) (05) (07) (09) (11) + * + */ + +# else + +// MPR121 pins Rev A (upright pins below MPR121 for main keys and rollers) + +#define R1Pin 10 +#define R2Pin 11 +#define R3Pin 8 +#define R4Pin 9 +#define R5Pin 6 + +#define K4Pin 7 +#define K1Pin 4 +#define K2Pin 5 +#define K3Pin 2 +#define K5Pin 3 +#define K6Pin 0 +#define K7Pin 1 + +/* + * PINOUT ON PCB vs PINS ON MPR121 - Rev. A + * + * (R2) (R4) (K4) (K2) (K5) (K7) <-> (11) (09) (07) (05) (03) (01) + * + * (R1) (R3/6) (R5) (K1) (K3) (K6) <-> (10) (08) (06) (04) (02) (00) + * + */ + +#endif + +#define ON_Delay 20 // Set Delay after ON threshold before velocity is checked (wait for tounging peak) +#define touch_Thr 1200 // sensitivity for Teensy touch sensors +#define CCN_Port 5 // Controller number for portamento level +#define CCN_PortOnOff 65// Controller number for portamento on/off + + +// Send CC data no more than every CC_INTERVAL +// milliseconds +#define CC_INTERVAL 5 + + +// The three states of our main state machine + +// No note is sounding +#define NOTE_OFF 1 + +// We've observed a transition from below to above the +// threshold value. We wait a while to see how fast the +// breath velocity is increasing +#define RISE_WAIT 2 + +// A note is sounding +#define NOTE_ON 3 + + +//display states +#define DISPLAYOFF_IDL 0 +#define MAIN_MENU 1 +#define PATCH_VIEW 2 +#define BREATH_ADJ_IDL 10 +#define BREATH_ADJ_THR 11 +#define BREATH_ADJ_MAX 12 +#define PORTAM_ADJ_IDL 20 +#define PORTAM_ADJ_THR 21 +#define PORTAM_ADJ_MAX 22 +#define PITCHB_ADJ_IDL 30 +#define PITCHB_ADJ_THR 31 +#define PITCHB_ADJ_MAX 32 +#define EXTRAC_ADJ_IDL 40 +#define EXTRAC_ADJ_THR 41 +#define EXTRAC_ADJ_MAX 42 +#define VIBRAT_ADJ_IDL 50 +#define VIBRAT_ADJ_THR 51 +#define VIBRAT_ADJ_DPT 52 +#define CTOUCH_ADJ_IDL 60 +#define CTOUCH_ADJ_THR 61 +#define SETUP_BR_MENU 80 +#define SETUP_CT_MENU 90 +#define ROTATOR_MENU 100 +#define SYNTH_MENU 110 + +// EEPROM addresses for settings +#define VERSION_ADDR 0 +#define BREATH_THR_ADDR 2 +#define BREATH_MAX_ADDR 4 +#define PORTAM_THR_ADDR 6 +#define PORTAM_MAX_ADDR 8 +#define PITCHB_THR_ADDR 10 +#define PITCHB_MAX_ADDR 12 +#define TRANSP_ADDR 14 +#define MIDI_ADDR 16 +#define BREATH_CC_ADDR 18 +#define BREATH_AT_ADDR 20 +#define VELOCITY_ADDR 22 +#define PORTAM_ADDR 24 +#define PB_ADDR 26 +#define EXTRA_ADDR 28 +#define VIBRATO_ADDR 30 +#define DEGLITCH_ADDR 32 +#define EXTRAC_THR_ADDR 34 +#define EXTRAC_MAX_ADDR 36 +#define PATCH_ADDR 38 +#define OCTAVE_ADDR 40 +#define CTOUCH_THR_ADDR 42 +#define BREATHCURVE_ADDR 44 +#define VEL_SMP_DL_ADDR 46 +#define VEL_BIAS_ADDR 48 +#define PINKY_KEY_ADDR 50 +#define FP1_ADDR 52 +#define FP2_ADDR 54 +#define FP3_ADDR 56 +#define FP4_ADDR 58 +#define FP5_ADDR 60 +#define FP6_ADDR 62 +#define FP7_ADDR 64 +#define DIPSW_BITS_ADDR 66 +#define PARAL_ADDR 68 +#define ROTN1_ADDR 70 +#define ROTN2_ADDR 72 +#define ROTN3_ADDR 74 +#define ROTN4_ADDR 76 +#define PRIO_ADDR 78 + +//"factory" values for settings +#define VERSION 28 +#define BREATH_THR_FACTORY 1400 +#define BREATH_MAX_FACTORY 4000 +#define PORTAM_THR_FACTORY 2600 +#define PORTAM_MAX_FACTORY 3300 +#define PITCHB_THR_FACTORY 1400 +#define PITCHB_MAX_FACTORY 2300 +#define EXTRAC_THR_FACTORY 1200 +#define EXTRAC_MAX_FACTORY 2400 +#define TRANSP_FACTORY 12 // 12 is 0 transpose +#define MIDI_FACTORY 1 // 1-16 +#define BREATH_CC_FACTORY 2 //thats CC#2, see ccList +#define BREATH_AT_FACTORY 0 //aftertouch default off +#define VELOCITY_FACTORY 0 // 0 is dynamic/breath controlled velocity +#define PORTAM_FACTORY 2 // 0 - OFF, 1 - ON, 2 - SW +#define PB_FACTORY 1 // 0 - OFF, 1 - 12 +#define EXTRA_FACTORY 2 // 0 - OFF, 1 - Modulation wheel, 2 - Foot pedal, 3 - Filter Cutoff, 4 - Sustain pedal +#define VIBRATO_FACTORY 4 // 0 - OFF, 1 - 9 depth +#define DEGLITCH_FACTORY 20 // 0 - OFF, 5 to 70 ms in steps of 5 +#define PATCH_FACTORY 1 // MIDI program change 1-128 +#define OCTAVE_FACTORY 3 // 3 is 0 octave change +#define CTOUCH_THR_FACTORY 125 // MPR121 touch threshold +#define BREATHCURVE_FACTORY 4 // 0 to 12 (-4 to +4, S1 to S4) +#define VEL_SMP_DL_FACTORY 20 // 0 to 30 ms in steps of 5 +#define VEL_BIAS_FACTORY 0 // 0 to 9 +#define PINKY_KEY_FACTORY 12 // 0 - 11 (QuickTranspose -12 to -1), 12 (pb/2), 13 - 22 (QuickTranspose +1 to +12) +#define DIPSW_BITS_FACTORY 0 // virtual dip switch settings for special modes (work in progress) +#define PARAL_FACTORY 31 // 7 (+ 24) Rotator parallel +#define ROTN1_FACTORY 19 // -5 (+24) Rotation 1 +#define ROTN2_FACTORY 14 // -10 (+24) Rotation 2 +#define ROTN3_FACTORY 17 // -7 (+24) Rotation 3 +#define ROTN4_FACTORY 10 // -14 (+24) Rotation 4 +#define PRIO_FACTORY 0 // Mono priority 0 - BAS(e note), 1 - ROT(ating note) + +#define OLED_RESET 4 +Adafruit_SSD1306 display(OLED_RESET); + +#define LOGO16_GLCD_HEIGHT 16 +#define LOGO16_GLCD_WIDTH 16 + + // 'NuEVI' logo +static const unsigned char PROGMEM nuevi_logo_bmp[] = { +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xff, 0xff, 0xe3, 0x60, 0x00, 0x07, 0x73, 0x60, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xff, 0xff, 0xe3, 0x60, 0x00, 0x0e, 0xe3, 0x60, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x03, 0x60, 0x00, 0x1d, 0xc3, 0x60, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x60, 0x00, 0x3b, 0x83, 0x60, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x60, 0x00, 0x77, 0x03, 0x60, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x60, 0x00, 0xee, 0x03, 0x60, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x60, 0x01, 0xdc, 0x03, 0x60, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x60, 0x03, 0xb8, 0x03, 0x60, 0x00, +0x00, 0x00, 0x00, 0x20, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x60, 0x07, 0x70, 0x03, 0x60, 0x00, +0x00, 0x00, 0x00, 0x60, 0x00, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x60, 0x0e, 0xe0, 0x03, 0x60, 0x00, +0x00, 0x00, 0x00, 0x60, 0x00, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x60, 0x1d, 0xc0, 0x03, 0x60, 0x00, +0x00, 0x03, 0x00, 0x60, 0x00, 0x01, 0x80, 0x00, 0x00, 0x03, 0x60, 0x3b, 0x80, 0x03, 0x60, 0x00, +0x00, 0x03, 0x00, 0xe0, 0x00, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x60, 0x77, 0x00, 0x03, 0x60, 0x00, +0x00, 0x03, 0x00, 0xc0, 0x00, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x60, 0xee, 0x00, 0x03, 0x60, 0x00, +0x00, 0x03, 0x80, 0xc0, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x61, 0xdc, 0x00, 0x03, 0x60, 0x00, +0x00, 0x07, 0x80, 0xc0, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x63, 0xb8, 0x00, 0x03, 0x60, 0x00, +0x00, 0x07, 0xc0, 0xc0, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x67, 0x70, 0x00, 0x03, 0x60, 0x00, +0x00, 0x06, 0xc0, 0xc0, 0x00, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x6e, 0xe0, 0x00, 0x03, 0x60, 0x00, +0x00, 0x06, 0x60, 0xc1, 0x01, 0x01, 0xb0, 0x00, 0x00, 0x03, 0x7d, 0xc0, 0x00, 0x03, 0x60, 0x00, +0x00, 0x06, 0x30, 0xc3, 0x03, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x7b, 0x80, 0x00, 0x03, 0x60, 0x00, +0x00, 0x0c, 0x30, 0xc3, 0x07, 0x01, 0xbf, 0xff, 0xff, 0xe3, 0x77, 0x00, 0x00, 0x03, 0x60, 0x00, +0x00, 0x0c, 0x1c, 0xc3, 0x06, 0x01, 0x80, 0x00, 0x00, 0x03, 0x0e, 0x00, 0x00, 0x03, 0x60, 0x00, +0x00, 0x0c, 0x0c, 0xc2, 0x0e, 0x01, 0xff, 0xff, 0xff, 0xe3, 0xfc, 0x00, 0x00, 0x03, 0x60, 0x00, +0x00, 0x0c, 0x0e, 0xc6, 0x1e, 0x01, 0xff, 0xff, 0xff, 0xe3, 0xf8, 0x00, 0x00, 0x03, 0x60, 0x00, +0x00, 0x0c, 0x07, 0xc6, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0c, 0x03, 0xc6, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0c, 0x01, 0xc7, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0c, 0x00, 0xc7, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0c, 0x00, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +const int16_t AKWF_vgame_0006[257] = { + 1, 2, 2, 2, 4, 5, 6, 7, 9, + 7, 10, 10, 11, 11, 13, 12, 15, 12, 16, + 14, 16, 14, 18, 16, 18, 15, 20, 16, 21, + 18, 20, 21, 20, 21, 19, 24, 19, 25, 16, + 27, 15, 29, 13, 32, 13, 34, 11, 34, 12, + 34, 13, 33, 17, 30, 20, 25, 25, 19, 32, + 12, 41, 3, 50, -7, 63, -21, 78, -38, 98, + -63, 128, -105, 189, -211, 370, -473, 11424, 28860, 30309, + 32767, 20949, 3562, 277, -2542, -2886, -3011, -2718, -2830, -2678, + -2711, -2583, -2584, -2495, -2470, -2404, -2359, -2315, -2257, -2226, + -2161, -2140, -2068, -2054, -1980, -1970, -1897, -1888, -1818, -1808, + -1743, -1731, -1670, -1654, -1601, -1579, -1535, -1510, -1469, -1442, + -1408, -1376, -1348, -1315, -1289, -1255, -1233, -1199, -1178, -1145, + -1123, -1092, -1073, -1044, -1024, -995, -975, -950, -929, -906, + -885, -864, -842, -823, -803, -783, -764, -746, -727, -710, + -691, -675, -656, -641, -625, -608, -594, -579, -563, -549, + -535, -521, -507, -494, -480, -468, -456, -442, -430, -418, + -407, -397, -386, -375, -364, -353, -343, -334, -324, -314, + -306, -296, -288, -279, -271, -262, -255, -247, -240, -232, + -225, -218, -211, -204, -198, -191, -184, -178, -172, -167, + -162, -155, -150, -144, -140, -134, -129, -124, -120, -116, + -112, -109, -103, -100, -95, -92, -87, -85, -81, -77, + -74, -70, -67, -63, -60, -58, -56, -52, -49, -48, + -44, -42, -40, -37, -35, -33, -31, -29, -26, -24, + -23, -21, -20, -17, -15, -14, -12, -11, -9, -8, + -7, -6, -5, -3, -1, -1, 0, 1 +}; + +const int16_t AKWF_vgtri_0008[257] = { + 63, 609, 287, 611, 129, 1825, 2747, 2663, 2408, + 3562, 5515, 5160, 5230, 5504, 7586, 7340, 7533, 7305, 7687, + 9613, 9631, 9637, 9524, 11857, 12359, 12250, 12081, 13593, 14672, + 14355, 14361, 15180, 16991, 16376, 16863, 16293, 17459, 18916, 18848, + 18683, 19150, 21474, 21446, 21417, 21419, 23298, 23784, 23498, 23745, + 23423, 25488, 25834, 25908, 25526, 27395, 28652, 28406, 28302, 29161, + 30890, 30482, 30739, 30475, 31022, 32065, 31842, 32069, 31644, 29346, + 29267, 29344, 29327, 27546, 26910, 27287, 26952, 27382, 25289, 24917, + 24820, 25244, 23430, 22091, 22333, 22448, 21624, 19895, 20195, 20142, + 19911, 17841, 17994, 17872, 18024, 17770, 15792, 15732, 15724, 15878, + 13625, 12958, 13165, 13239, 11947, 10581, 11185, 10683, 11303, 9673, + 8649, 8681, 8968, 7981, 5921, 6172, 6155, 5952, 3918, 3941, + 3920, 3973, 3846, 1818, 1744, 1706, 1893, 33, -562, -425, + -292, -1562, -2952, -2401, -2849, -2282, -3780, -4860, -6817, -7657, + -7320, -7501, -7404, -7421, -7549, -9619, -9605, -9669, -9484,-11431, +-14014,-13961,-14049,-13933,-14078,-13894,-14153,-13685,-15369,-16886, +-16534,-16605,-16969,-19998,-21140,-20949,-21022,-20982,-21006,-21004, +-20963,-21098,-23516,-23658,-23634,-23504,-25279,-28009,-27935,-28085, +-27892,-28127,-27839,-28221,-27607,-29387,-30757,-30699,-30366,-31414, +-32079,-30342,-30740,-30564,-30652,-30617,-30606,-30669,-30547,-28194, +-27905,-28032,-28080,-26491,-23630,-23689,-23533,-23720,-23513,-23745, +-23459,-23902,-22617,-21243,-21480,-21483,-21109,-17813,-16475,-16670, +-16600,-16636,-16612,-16626,-16626,-16623,-14639,-14373,-14424,-14589, +-12705, -9668, -9671, -9554, -9699, -9536, -9725, -9480, -9883, -8706, + -7231, -7497, -7458, -7173, -3925, -2474, -2670, -2602, -2637, -2612, + -2630, -2620, -2658, -712, -321, -490, -442, 63 +}; + +const int16_t AKWF_violin_0010[257] = { + 27, 303, 1129, 2595, 4250, 5804, 7288, 8741, 10134, + 11437, 12646, 13753, 14783, 15739, 16600, 17358, 17995, 18484, 18819, + 19029, 19146, 19172, 19102, 18942, 18690, 18357, 17953, 17508, 17045, + 16549, 15998, 15414, 14847, 14338, 13865, 13406, 12962, 12521, 12076, + 11672, 11380, 11203, 11075, 10944, 10836, 10785, 10802, 10885, 11040, + 11260, 11529, 11844, 12213, 12636, 13125, 13679, 14304, 14993, 15730, + 16512, 17335, 18205, 19111, 20049, 21018, 22026, 23082, 24153, 25186, + 26174, 27109, 27982, 28814, 29631, 30426, 31136, 31727, 32189, 32513, + 32694, 32764, 32754, 32643, 32391, 31986, 31429, 30703, 29836, 28882, + 27852, 26719, 25456, 24081, 22672, 21248, 19761, 18182, 16530, 14891, + 13302, 11750, 10238, 8774, 7337, 5936, 4571, 3254, 1999, 838, + -206, -1154, -2020, -2805, -3462, -3967, -4341, -4611, -4787, -4881, + -4906, -4858, -4722, -4495, -4199, -3848, -3448, -2979, -2446, -1905, + -1410, -956, -492, -1, 487, 952, 1385, 1766, 2086, 2364, + 2632, 2871, 3014, 3016, 2915, 2754, 2536, 2256, 1914, 1498, + 981, 364, -325, -1065, -1872, -2795, -3839, -4945, -6079, -7240, + -8461, -9748,-11061,-12369,-13671,-15008,-16373,-17730,-19056,-20330, +-21545,-22694,-23794,-24888,-25950,-26909,-27739,-28460,-29112,-29690, +-30154,-30490,-30711,-30828,-30849,-30782,-30640,-30412,-30088,-29668, +-29163,-28585,-27940,-27231,-26473,-25692,-24920,-24149,-23323,-22440, +-21568,-20770,-20039,-19334,-18639,-17973,-17337,-16749,-16256,-15873, +-15569,-15310,-15090,-14918,-14789,-14721,-14736,-14834,-14992,-15204, +-15451,-15702,-15952,-16211,-16480,-16760,-17041,-17318,-17591,-17852, +-18087,-18267,-18377,-18423,-18407,-18336,-18233,-18101,-17901,-17587, +-17175,-16711,-16203,-15622,-14930,-14131,-13237,-12246,-11172,-10039, + -8840, -7580, -6262, -4870, -3317, -1690, -473, 27 +}; + +const int16_t AKWF_oboe_0006[257] = { + 8, 267, 522, 775, 1026, 1276, 1525, 1768, 2015, + 2254, 2496, 2736, 2980, 3228, 3484, 3750, 4029, 4321, 4627, + 4957, 5314, 5705, 6136, 6607, 7119, 7679, 8282, 8931, 9626, + 10366, 11151, 11982, 12854, 13771, 14724, 15718, 16754, 17818, 18909, + 20012, 21117, 22221, 23311, 24383, 25434, 26446, 27412, 28331, 29186, + 29972, 30688, 31317, 31868, 32317, 32670, 32767, 32761, 32767, 32764, + 32762, 32523, 32105, 31593, 30966, 30239, 29403, 28475, 27447, 26323, + 25111, 23820, 22460, 21052, 19591, 18097, 16571, 15021, 13464, 11900, + 10330, 8772, 7225, 5698, 4210, 2752, 1341, -13, -1307, -2533, + -3692, -4791, -5819, -6782, -7679, -8501, -9261, -9956,-10585,-11155, +-11667,-12121,-12524,-12878,-13190,-13465,-13708,-13925,-14116,-14289, +-14453,-14616,-14786,-14974,-15179,-15404,-15651,-15919,-16208,-16519, +-16850,-17200,-17571,-17961,-18365,-18781,-19209,-19639,-20077,-20515, +-20949,-21376,-21787,-22182,-22560,-22912,-23235,-23527,-23779,-23989, +-24156,-24277,-24347,-24369,-24337,-24254,-24116,-23925,-23674,-23367, +-22996,-22558,-22057,-21493,-20871,-20195,-19465,-18689,-17871,-17011, +-16116,-15192,-14250,-13299,-12353,-11419,-10490, -9569, -8654, -7737, + -6822, -5901, -4975, -4056, -3147, -2262, -1407, -581, 209, 964, + 1679, 2346, 2960, 3523, 4026, 4470, 4857, 5193, 5490, 5755, + 5990, 6199, 6375, 6520, 6630, 6702, 6733, 6724, 6678, 6594, + 6470, 6305, 6096, 5846, 5553, 5222, 4859, 4472, 4068, 3656, + 3236, 2808, 2374, 1937, 1491, 1036, 579, 116, -343, -794, + -1236, -1658, -2057, -2433, -2781, -3105, -3408, -3684, -3939, -4171, + -4376, -4555, -4705, -4819, -4899, -4941, -4948, -4920, -4856, -4756, + -4621, -4453, -4251, -4015, -3755, -3475, -3184, -2888, -2587, -2286, + -1983, -1683, -1387, -1094, -806, -528, -256, 8 +}; + +const int16_t AKWF_altosax_0013[257] = { + 8, 934, 1757, 2638, 3598, 4607, 5581, 6586, 7689, + 8646, 9725, 10834, 12000, 13106, 14181, 15300, 16377, 17445, 18545, + 19676, 20849, 21955, 23006, 23981, 24859, 25715, 26548, 27465, 28299, + 29019, 29731, 30311, 30822, 31392, 31861, 32242, 32505, 32679, 32767, + 32759, 32734, 32668, 32605, 32508, 32224, 31908, 31595, 31137, 30655, + 30172, 29538, 28750, 27959, 27072, 26057, 24937, 23664, 22228, 20739, + 19332, 17922, 16535, 15097, 13764, 12691, 11815, 11097, 10334, 9541, + 8660, 7781, 6784, 5645, 4402, 3061, 1763, 414, -967, -2355, + -3633, -4711, -5737, -6695, -7510, -8359, -9124, -9794,-10386,-10944, +-11430,-11840,-12295,-12690,-13049,-13436,-13791,-14104,-14336,-14452, +-14495,-14466,-14485,-14466,-14357,-14255,-14105,-13952,-13820,-13584, +-13384,-13189,-12951,-12723,-12493,-12211,-11873,-11578,-11242,-10853, +-10496,-10149, -9693, -9160, -8531, -7916, -7337, -6652, -5955, -5338, + -4709, -4165, -3686, -3221, -2916, -2549, -2221, -1909, -1621, -1312, + -1023, -879, -752, -703, -638, -631, -657, -678, -783, -920, + -1049, -1247, -1493, -1745, -1996, -2203, -2414, -2671, -2936, -3229, + -3543, -3908, -4205, -4536, -4896, -5202, -5584, -5959, -6371, -6794, + -7162, -7496, -7841, -8162, -8495, -8845, -9179, -9510, -9784,-10049, +-10332,-10596,-10844,-11051,-11225,-11349,-11471,-11550,-11581,-11579, +-11589,-11672,-11690,-11688,-11679,-11666,-11603,-11594,-11632,-11563, +-11467,-11350,-11294,-11267,-11210,-11105,-10995,-10919,-10846,-10764, +-10713,-10727,-10755,-10765,-10764,-10728,-10627,-10543,-10549,-10573, +-10531,-10489,-10433,-10295,-10183,-10164,-10141,-10110,-10039, -9999, + -9982, -9883, -9737, -9605, -9494, -9428, -9332, -9216, -9024, -8735, + -8516, -8309, -8102, -7768, -7410, -6969, -6519, -6075, -5624, -5218, + -4672, -4132, -3663, -3046, -2306, -1555, -774, 8 +}; + +const int16_t AKWF_sinharm_0011[257] = { + 0, 3519, 6994, 10388, 13660, 16769, 19684, 22368, 24792, + 26928, 28755, 30254, 31411, 32218, 32668, 32763, 32508, 31910, 30987, + 29754, 28237, 26457, 24447, 22238, 19860, 17355, 14758, 12104, 9435, + 6784, 4192, 1691, -685, -2907, -4946, -6777, -8379, -9739,-10843, +-11681,-12248,-12549,-12585,-12365,-11903,-11215,-10322, -9246, -8013, + -6653, -5196, -3670, -2110, -550, 980, 2449, 3825, 5082, 6192, + 7130, 7879, 8419, 8737, 8827, 8678, 8291, 7669, 6819, 5752, + 4482, 3027, 1409, -345, -2212, -4158, -6155, -8168,-10164,-12111, +-13974,-15722,-17324,-18749,-19972,-20969,-21716,-22201,-22404,-22322, +-21945,-21276,-20315,-19074,-17561,-15793,-13795,-11587, -9198, -6657, + -4000, -1258, 1528, 4324, 7090, 9789, 12382, 14831, 17105, 19172, + 20998, 22559, 23833, 24798, 25441, 25752, 25722, 25355, 24650, 23615, + 22266, 20620, 18696, 16520, 14121, 11534, 8788, 5926, 2983, 0, + -2982, -5926, -8789,-11534,-14122,-16520,-18695,-20620,-22266,-23615, +-24649,-25355,-25722,-25753,-25441,-24798,-23833,-22560,-20998,-19172, +-17105,-14831,-12382, -9789, -7091, -4323, -1529, 1258, 3999, 6656, + 9198, 11587, 13796, 15794, 17560, 19073, 20315, 21276, 21945, 22322, + 22405, 22200, 21716, 20968, 19973, 18749, 17324, 15722, 13975, 12112, + 10165, 8168, 6154, 4158, 2212, 346, -1409, -3027, -4482, -5752, + -6819, -7670, -8291, -8678, -8827, -8737, -8418, -7879, -7130, -6192, + -5082, -3825, -2449, -980, 550, 2110, 3669, 5195, 6653, 8013, + 9246, 10321, 11215, 11903, 12366, 12585, 12550, 12249, 11680, 10844, + 9739, 8380, 6777, 4946, 2907, 686, -1691, -4192, -6783, -9434, +-12103,-14757,-17356,-19860,-22238,-24446,-26458,-28237,-29755,-30987, +-31911,-32508,-32763,-32668,-32217,-31411,-30254,-28755,-26928,-24792, +-22369,-19684,-16770,-13660,-10388, -6994, -3519, 0 +}; + +const int16_t AKWF_raw_0004[257] = { + 0, 512, 1024, 1534, 2047, 2558, 3072, 3582, 4097, + 4607, 5119, 5632, 6143, 6656, 7168, 7681, 8191, 8703, 9215, + 9728, 10239, 10752, 11264, 11776, 12288, 12799, 13313, 13823, 14337, + 14847, 15360, 15872, 16385, 16895, 17408, 17920, 18432, 18943, 19456, + 19968, 20480, 20993, 21503, 22016, 22527, 23041, 23550, 24065, 24574, + 25089, 25597, 26114, 26621, 27139, 27644, 28163, 28667, 29188, 29690, + 30214, 30713, 31240, 31733, 32275, 32662, 32244, 31699, 31193, 30659, + 30149, 29618, 29108, 28579, 28065, 27539, 27024, 26498, 25984, 25460, + 24946, 24422, 23907, 23384, 22868, 22347, 21830, 21311, 20795, 20275, + 19759, 19241, 18724, 18206, 17687, 17173, 16655, 16140, 15622, 15107, + 14590, 14075, 13558, 13044, 12528, 12014, 11497, 10983, 10468, 9954, + 9438, 8924, 8411, 7896, 7383, 6870, 6356, 5842, 5330, 4817, + 4304, 3792, 3279, 2767, 2254, 1742, 1230, 720, 208, -302, + -813, -1325, -1836, -2346, -2857, -3367, -3876, -4387, -4896, -5406, + -5915, -6426, -6933, -7444, -7952, -8461, -8968, -9479, -9984,-10495, +-11000,-11510,-12014,-12526,-13029,-13539,-14044,-14552,-15057,-15566, +-16070,-16577,-17082,-17588,-18094,-18598,-19106,-19605,-20116,-20614, +-21126,-21622,-22137,-22629,-23146,-23634,-24154,-24641,-25162,-25647, +-26167,-26653,-27171,-27662,-28160,-28628,-29038,-29389,-29762,-30127, +-30471,-30871,-31135,-32329,-32371,-31676,-31279,-30682,-30239,-29670, +-29205,-28652,-28174,-27635,-27146,-26615,-26118,-25595,-25091,-24574, +-24065,-23552,-23038,-22529,-22013,-21506,-20989,-20483,-19965,-19459, +-18941,-18434,-17916,-17411,-16892,-16386,-15870,-15362,-14845,-14338, +-13822,-13313,-12798,-12288,-11775,-11263,-10753,-10239, -9729, -9215, + -8705, -8191, -7681, -7167, -6656, -6142, -5632, -5119, -4607, -4095, + -3583, -3071, -2559, -2048, -1535, -1024, -512, 0 +}; + +#if (SSD1306_LCDHEIGHT != 64) +#error("Height incorrect, please fix Adafruit_SSD1306.h!"); +#endif + + +//variables setup + +unsigned short breathThrVal;// = 350; +unsigned short breathMaxVal;// = 1000; +unsigned short portamThrVal;// = 1730; +unsigned short portamMaxVal;// = 3300; +unsigned short pitchbThrVal;// = 1200; +unsigned short pitchbMaxVal;// = 2400; +unsigned short extracThrVal;// = 1200; +unsigned short extracMaxVal;// = 2400; +unsigned short ctouchThrVal;// = 120; +unsigned short transpose; +unsigned short MIDIchannel; +unsigned short breathCC; // OFF:MW:BR:VL:EX:MW+:BR+:VL+:EX+ +unsigned short breathAT; +unsigned short velocity; +unsigned short portamento;// switching on cc65? just cc5 enabled? SW:ON:OFF +unsigned short PBdepth; // OFF:1-12 divider +unsigned short extraCT; // OFF:MW:FP:FC:SP +unsigned short vibrato; // OFF:1-9 +unsigned short deglitch; // 0-70 ms in steps of 5 +unsigned short patch; // 1-128 +unsigned short octave; +unsigned short curve; +unsigned short velSmpDl; // 0-30 ms +unsigned short velBias; // 0-9 +unsigned short pinkySetting; // 0 - 11 (QuickTranspose -12 to -1), 12 (pb/2), 13 - 24 (QuickTranspose +1 to +12) +unsigned short dipSwBits; // virtual dip switch settings for special modes (work in progress) +unsigned short priority; // mono priority for rotator chords +unsigned short wave = 2; // SAW, SQR, TRI +unsigned short cutoff = 7; // 0-9 +unsigned short reso = 2; //0-9 +unsigned short filter = 0; // 0 INT, 1 EXT +unsigned short vol = 7; // 0-9 + +unsigned short fastPatch[7] = {0,0,0,0,0,0,0}; + +byte rotatorOn = 0; +byte currentRotation = 0; +int rotations[4] = { -5, -10, -7, -14 }; // semitones { -5, -10, -7, -14 }; +int parallel = 7; // semitones + +int breathLoLimit = 0; +int breathHiLimit = 4095; +int portamLoLimit = 1000; +int portamHiLimit = 5000; +int pitchbLoLimit = 500; +int pitchbHiLimit = 4000; +int extracLoLimit = 500; +int extracHiLimit = 4000; +int ctouchLoLimit = 50; +int ctouchHiLimit = 350; + +int breathStep; +int portamStep; +int pitchbStep; +int extracStep; +int ctouchStep; + +int minOffset = 50; + +int deumButtons = 0; +int lastDeumButtons = 0; +int deumButtonState = 0; +byte buttonPressedAndNotUsed = 0; + +byte mainMenuCursor = 1; +byte setupBrMenuCursor = 1; +byte setupCtMenuCursor = 1; +byte rotatorMenuCursor = 1; +byte synthMenuCursor = 1; + +byte state = 0; +byte stateFirstRun = 1; + +byte subTranspose = 0; +byte subOctave = 0; +byte subMIDI = 0; +byte subBreathCC = 0; +byte subBreathAT = 0; +byte subVelocity = 0; +byte subCurve = 0; +byte subPort = 0; +byte subPB = 0; +byte subExtra = 0; +byte subVibrato = 0; +byte subDeglitch = 0; +byte subPinky = 0; +byte subVelSmpDl = 0; +byte subVelBias = 0; +byte subParallel = 0; +byte subRotator = 0; +byte subPriority = 0; +byte subWave = 0; +byte subCutoff = 0; +byte subReso = 0; +byte subFilter = 0; +byte subVolume = 0; + +byte ccList[9] = {0,1,2,7,11,1,2,7,11}; // OFF, Modulation, Breath, Volume, Expression (then same sent in hires) + +int pbDepthList[13] = {0,8192,4096,2731,2048,1638,1365,1170,1024,910,819,744,683}; + +byte cursorNow; +byte forcePix = 0; +byte forceRedraw = 0; + +int pos1; +int pos2; + +// the following variables are unsigned longs because the time, measured in +// milliseconds, will quickly become a bigger number than can be stored in an int. +unsigned long lastDebounceTime = 0; // the last time the output pin was toggled +unsigned long debounceDelay = 30; // the debounce time; increase if the output flickers +unsigned long buttonRepeatTime = 0; +unsigned long buttonPressedTime = 0; +unsigned long buttonRepeatInterval = 50; +unsigned long buttonRepeatDelay = 400; +unsigned long pixelUpdateTime = 0; +unsigned long pixelUpdateInterval = 100; +unsigned long cursorBlinkTime = 0; // the last time the cursor was toggled +unsigned long cursorBlinkInterval = 300; // the cursor blink toggle interval time +unsigned long patchViewTime = 0; +unsigned long patchViewTimeUp = 2000; // ms until patch view shuts off +unsigned long menuTime = 0; +unsigned long menuTimeUp = 60000; // menu shuts off after one minute of button inactivity +unsigned long lastDeglitchTime = 0; // The last time the fingering was changed +unsigned long ccSendTime = 0L; // The last time we sent CC values +unsigned long breath_on_time = 0L; // Time when breath sensor value went over the ON threshold + +int lastFingering = 0; // Keep the last fingering value for debouncing + +int mainState; // The state of the main state machine + +int initial_breath_value; // The breath value at the time we observed the transition + +byte activeMIDIchannel=1; // MIDI channel +byte activePatch=0; +byte doPatchUpdate=0; + +byte FPD = 0; + +int breathLevel=0; // breath level (smoothed) not mapped to CC value +int oldbreath=0; +unsigned int oldbreathhires=0; +unsigned int breathCV=0; +float filterFreq = 30.0; + +float filterVal = 0.15; +float smoothedVal; +int pressureSensor; // pressure data from breath sensor, for midi breath cc and breath threshold checks +int lastPressure; +byte velocitySend; // remapped midi velocity from breath sensor (or set to static value if selected) + +int biteSensor=0; // capacitance data from bite sensor, for midi cc and threshold checks +byte portIsOn=0; // keep track and make sure we send CC with 0 value when off threshold +int oldport=0; +int lastBite=0; + +int exSensor=0; +byte extracIsOn=0; +int oldextrac=0; +int lastEx=0; + +int pitchBend=8192; +int oldpb=8192; +int pbUp=0; +int pbDn=0; +int lastPbUp=0; +int lastPbDn=0; + +byte oldpkey = 0; + +float vibDepth[10] = {0,0.05,0.1,0.15,0.2,0.25,0.3,0.35,0.40,0.45}; // max pitch bend values (+/-) for the vibrato settings + +unsigned int curveM4[] = {0,4300,7000,8700,9900,10950,11900,12600,13300,13900,14500,15000,15450,15700,16000,16250,16383}; +unsigned int curveM3[] = {0,2900,5100,6650,8200,9500,10550,11500,12300,13100,13800,14450,14950,15350,15750,16150,16383}; +unsigned int curveM2[] = {0,2000,3600,5000,6450,7850,9000,10100,11100,12100,12900,13700,14400,14950,15500,16000,16383}; +unsigned int curveM1[] = {0,1400,2850,4100,5300,6450,7600,8700,9800,10750,11650,12600,13350,14150,14950,15650,16383}; +unsigned int curveIn[] = {0,1023,2047,3071,4095,5119,6143,7167,8191,9215,10239,11263,12287,13311,14335,15359,16383}; +unsigned int curveP1[] = {0,600,1350,2150,2900,3800,4700,5600,6650,7700,8800,9900,11100,12300,13500,14850,16383}; +unsigned int curveP2[] = {0,400,800,1300,2000,2650,3500,4300,5300,6250,7400,8500,9600,11050,12400,14100,16383}; +unsigned int curveP3[] = {0,200,500,900,1300,1800,2350,3100,3800,4600,5550,6550,8000,9500,11250,13400,16383}; +unsigned int curveP4[] = {0,100,200,400,700,1050,1500,1950,2550,3200,4000,4900,6050,7500,9300,12100,16383}; +unsigned int curveS1[] = {0,600,1350,2150,2900,3800,4700,6000,8700,11000,12400,13400,14300,14950,15500,16000,16383}; +unsigned int curveS2[] = {0,600,1350,2150,2900,4000,6100,9000,11000,12100,12900,13700,14400,14950,15500,16000,16383}; +//unsigned int curveS3[] = {0,600,1350,2300,3800,6200,8700,10200,11100,12100,12900,13700,14400,14950,15500,16000,16383}; +//unsigned int curveS4[] = {0,600,1700,4000,6600,8550,9700,10550,11400,12200,12900,13700,14400,14950,15500,16000,16383}; + +unsigned int curveZ1[] = {0,1400,2100,2900,3200,3900,4700,5600,6650,7700,8800,9900,11100,12300,13500,14850,16383}; +unsigned int curveZ2[] = {0,2000,3200,3800,4096,4800,5100,5900,6650,7700,8800,9900,11100,12300,13500,14850,16383}; + +int vibThr; // this gets auto calibrated in setup +int vibThrLo; +int oldvibRead=0; +byte dirUp=0; // direction of first vibrato wave + +int fingeredNote; // note calculated from fingering (switches), transpose and octave settings +byte activeNote; // note playing +byte startNote=36; // set startNote to C (change this value in steps of 12 to start in other octaves) +int slurBase; // first note in slur sustain chord + +int slurInterval[9] = {-5,0,0,0,0,0,0,0,0}; +byte addedIntervals = 1; + +// Key variables, TRUE (1) for pressed, FALSE (0) for not pressed +byte K1; // Valve 1 (pitch change -2) +byte K2; // Valve 2 (pitch change -1) +byte K3; // Valve 3 (pitch change -3) +byte K4; // Left Hand index finger (pitch change -5) +byte K5; // Trill key 1 (pitch change +2) +byte K6; // Trill key 2 (pitch change +1) +byte K7; // Trill key 3 (pitch change +4) + +byte octaveR = 0; + +byte halfPitchBendKey; +byte specialKey; +byte pinkyKey; +byte lastSpecialKey = 0; + +byte slurSustain = 0; +byte parallelChord = 0; +byte subOctaveDouble = 0; + +unsigned int breathLedBrightness = 7000; // up to 16383, PWM +unsigned int portamLedBrightness = 7000; // up to 16383, PWM + +int internalNote = 0; +int internalPitchbend = 0; +//int ipb=8192; +//int oldipb=8192; +float cents = 0; +float cent = 1.000577789; +float internalVolume = 0.50; +float playVolume = 0; +byte intPatch = 1; // 0 = sine, 1 = saw + +float midiToFreq[128]; // for storing pre calculated frequencies for note numbers + + +// GUItool: begin automatically generated code +AudioSynthWaveform waveform1; //xy=167.77777862548828,86.66667079925537 +AudioFilterStateVariable filter1; //xy=285.4444389343262,245.8888816833496 +AudioMixer4 mixer2; //xy=408.88888931274414,128.77777862548828 +AudioOutputAnalog dac1; //xy=588.444450378418,216.99999618530273 +AudioConnection patchCord1(waveform1, 0, filter1, 0); +AudioConnection patchCord2(waveform1, 0, mixer2, 0); +AudioConnection patchCord3(filter1, 0, mixer2, 1); +AudioConnection patchCord4(mixer2, dac1); +// GUItool: end automatically generated code + + + +Adafruit_MPR121 touchSensor = Adafruit_MPR121(); // This is the 12-input touch sensor + + +//_______________________________________________________________________________________________ SETUP + +void setup() { + + analogReadResolution(12); // set resolution of ADCs to 12 bit + analogWriteFrequency(A6,2929.687); // set PWM freq for CV out + analogWriteResolution(14); // set resolution of PWMs to 14 bit (match hi-res midi) + + pinMode(dPin, INPUT_PULLUP); + pinMode(ePin, INPUT_PULLUP); + pinMode(uPin, INPUT_PULLUP); + pinMode(mPin, INPUT_PULLUP); + + pinMode(bLedPin, OUTPUT); // breath indicator LED + pinMode(pLedPin, OUTPUT); // portam indicator LED + pinMode(13,OUTPUT); // Teensy onboard LED + + + // if stored settings are not for current version, or Enter+Menu are pressed at startup, they are replaced by factory settings + + if ((readSetting(VERSION_ADDR) != VERSION) && (readSetting(VERSION_ADDR) < 24) || (!digitalRead(ePin) && !digitalRead(mPin))){ + writeSetting(VERSION_ADDR,VERSION); + writeSetting(BREATH_THR_ADDR,BREATH_THR_FACTORY); + writeSetting(BREATH_MAX_ADDR,BREATH_MAX_FACTORY); + writeSetting(PORTAM_THR_ADDR,PORTAM_THR_FACTORY); + writeSetting(PORTAM_MAX_ADDR,PORTAM_MAX_FACTORY); + writeSetting(PITCHB_THR_ADDR,PITCHB_THR_FACTORY); + writeSetting(PITCHB_MAX_ADDR,PITCHB_MAX_FACTORY); + writeSetting(EXTRAC_THR_ADDR,EXTRAC_THR_FACTORY); + writeSetting(EXTRAC_MAX_ADDR,EXTRAC_MAX_FACTORY); + writeSetting(CTOUCH_THR_ADDR,CTOUCH_THR_FACTORY); + } + + if ((readSetting(VERSION_ADDR) != VERSION) || (!digitalRead(ePin) && !digitalRead(mPin))){ + writeSetting(VERSION_ADDR,VERSION); + + writeSetting(TRANSP_ADDR,TRANSP_FACTORY); + writeSetting(MIDI_ADDR,MIDI_FACTORY); + writeSetting(BREATH_CC_ADDR,BREATH_CC_FACTORY); + writeSetting(BREATH_AT_ADDR,BREATH_AT_FACTORY); + writeSetting(VELOCITY_ADDR,VELOCITY_FACTORY); + writeSetting(PORTAM_ADDR,PORTAM_FACTORY); + writeSetting(PB_ADDR,PB_FACTORY); + writeSetting(EXTRA_ADDR,EXTRA_FACTORY); + writeSetting(VIBRATO_ADDR,VIBRATO_FACTORY); + writeSetting(DEGLITCH_ADDR,DEGLITCH_FACTORY); + writeSetting(PATCH_ADDR,PATCH_FACTORY); + writeSetting(OCTAVE_ADDR,OCTAVE_FACTORY); + writeSetting(BREATHCURVE_ADDR,BREATHCURVE_FACTORY); + writeSetting(VEL_SMP_DL_ADDR,VEL_SMP_DL_FACTORY); + writeSetting(VEL_BIAS_ADDR,VEL_BIAS_FACTORY); + writeSetting(PINKY_KEY_ADDR,PINKY_KEY_FACTORY); + writeSetting(FP1_ADDR,0); + writeSetting(FP2_ADDR,0); + writeSetting(FP3_ADDR,0); + writeSetting(FP4_ADDR,0); + writeSetting(FP5_ADDR,0); + writeSetting(FP6_ADDR,0); + writeSetting(FP7_ADDR,0); + writeSetting(DIPSW_BITS_ADDR,DIPSW_BITS_FACTORY); + writeSetting(PARAL_ADDR,PARAL_FACTORY); + writeSetting(ROTN1_ADDR,ROTN1_FACTORY); + writeSetting(ROTN2_ADDR,ROTN2_FACTORY); + writeSetting(ROTN3_ADDR,ROTN3_FACTORY); + writeSetting(ROTN4_ADDR,ROTN4_FACTORY); + writeSetting(PRIO_ADDR,PRIO_FACTORY); + } + // read settings from EEPROM + breathThrVal = readSetting(BREATH_THR_ADDR); + breathMaxVal = readSetting(BREATH_MAX_ADDR); + portamThrVal = readSetting(PORTAM_THR_ADDR); + portamMaxVal = readSetting(PORTAM_MAX_ADDR); + pitchbThrVal = readSetting(PITCHB_THR_ADDR); + pitchbMaxVal = readSetting(PITCHB_MAX_ADDR); + transpose = readSetting(TRANSP_ADDR); + MIDIchannel = readSetting(MIDI_ADDR); + breathCC = readSetting(BREATH_CC_ADDR); + breathAT = readSetting(BREATH_AT_ADDR); + velocity = readSetting(VELOCITY_ADDR); + portamento = readSetting(PORTAM_ADDR); + PBdepth = readSetting(PB_ADDR); + extraCT = readSetting(EXTRA_ADDR); + vibrato = readSetting(VIBRATO_ADDR); + deglitch = readSetting(DEGLITCH_ADDR); + extracThrVal = readSetting(EXTRAC_THR_ADDR); + extracMaxVal = readSetting(EXTRAC_MAX_ADDR); + patch = readSetting(PATCH_ADDR); + octave = readSetting(OCTAVE_ADDR); + ctouchThrVal = readSetting(CTOUCH_THR_ADDR); + curve = readSetting(BREATHCURVE_ADDR); + velSmpDl = readSetting(VEL_SMP_DL_ADDR); + velBias = readSetting(VEL_BIAS_ADDR); + pinkySetting = readSetting(PINKY_KEY_ADDR); + fastPatch[0] = readSetting(FP1_ADDR); + fastPatch[1] = readSetting(FP2_ADDR); + fastPatch[2] = readSetting(FP3_ADDR); + fastPatch[3] = readSetting(FP4_ADDR); + fastPatch[4] = readSetting(FP5_ADDR); + fastPatch[5] = readSetting(FP6_ADDR); + fastPatch[6] = readSetting(FP7_ADDR); + dipSwBits = readSetting(DIPSW_BITS_ADDR); + parallel = readSetting(PARAL_ADDR)-24; + rotations[0] = readSetting(ROTN1_ADDR)-24; + rotations[1] = readSetting(ROTN2_ADDR)-24; + rotations[2] = readSetting(ROTN3_ADDR)-24; + rotations[3] = readSetting(ROTN4_ADDR)-24; + priority = readSetting(PRIO_ADDR); + + activePatch = patch; + + breathStep = (breathHiLimit - breathLoLimit)/92; // 92 is the number of pixels in the settings bar + portamStep = (portamHiLimit - portamLoLimit)/92; + pitchbStep = (pitchbHiLimit - pitchbLoLimit)/92; + extracStep = (extracHiLimit - extracLoLimit)/92; + ctouchStep = (ctouchHiLimit - ctouchLoLimit)/92; + + for(int i=0;i<128;i++) { // set up table, midi note number to frequency + midiToFreq[i] = numToFreq(i); + } + + if (!touchSensor.begin(0x5A)) { + while (1); // Touch sensor initialization failed - stop doing stuff + } + + + // by default, we'll generate the high voltage from the 3.3v line internally! (neat!) + display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // initialize with the I2C addr 0x3D (for the 128x64) + // init done + + // Show image buffer on the display hardware. + // Since the buffer is intialized with an Adafruit splashscreen + // internally, this will display the splashscreen. + + display.clearDisplay(); + display.drawBitmap(0,0,nuevi_logo_bmp,128,64,1); + display.display(); + + + AudioMemory(50); + + dac1.analogReference(INTERNAL); // normal volume + //dac1.analogReference(EXTERNAL); // louder + + //waveform1.arbitraryWaveform(AKWF_vgame_0006,172.00); + //waveform1.arbitraryWaveform(AKWF_vgtri_0008,172.00); + //waveform1.arbitraryWaveform(AKWF_violin_0010,172.00); + //waveform1.arbitraryWaveform(AKWF_oboe_0006,172.00); + //waveform1.arbitraryWaveform(AKWF_altosax_0013,172.00); + //waveform1.arbitraryWaveform(AKWF_sinharm_0011,172.00); + waveform1.arbitraryWaveform(AKWF_raw_0004,172.00); + + updateSynth(); + + + //auto-calibrate the vibrato "dead zone" while showing splash screen + int cv1=touchRead(15); + digitalWrite(13,HIGH); + delay(250); + int cv2=touchRead(15); + digitalWrite(13,LOW); + delay(250); + int cv3=touchRead(15); + digitalWrite(13,HIGH); + delay(250); + digitalWrite(13,LOW); + int cv4=touchRead(15); + vibThr=(cv1+cv2+cv3+cv4)/4-30; + vibThrLo=(cv1+cv2+cv3+cv4)/4+30; + delay(250); + digitalWrite(13,HIGH); + delay(250); + digitalWrite(13,LOW); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(85,52); + display.println("v.1.1.5"); // FIRMWARE VERSION NUMBER HERE <<<<<<<<<<<<<<<<<<<<<<< + display.display(); + + delay(2000); + + state = DISPLAYOFF_IDL; + mainState = NOTE_OFF; // initialize main state machine + + if (!digitalRead(ePin)) { + activePatch=0; + doPatchUpdate=1; + } + + Serial3.begin(31250); // start serial with midi baudrate 31250 + Serial3.flush(); + + digitalWrite(13,HIGH); // Switch on the onboard LED to indicate power on/ready + + midiReset(); + +} + +//_______________________________________________________________________________________________ MAIN LOOP + +void loop() { + mainLoop(); +} + +void mainLoop() { + FilterOnePole breathFilter( LOWPASS, filterFreq ); // create a one pole (RC) lowpass filter + while (1){ + breathFilter.input(analogRead(A0)); + pressureSensor = constrain((int)breathFilter.output(),0,4095); // Get the filtered pressure sensor reading from analog pin A0, input from sensor MP3V5004GP + breathCV = breathCurve(map(constrain(pressureSensor,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,0,16383)); + analogWrite(A6,breathCV); + //pressureSensor = analogRead(A0); + //pressureSensor = smooth(analogRead(0), filterVal, smoothedVal); // second parameter determines smoothness - 0 is off, .9999 is max smooth + if (mainState == NOTE_OFF) { + if (activeMIDIchannel != MIDIchannel) activeMIDIchannel = MIDIchannel; // only switch channel if no active note + if ((activePatch != patch) && doPatchUpdate){ + activePatch = patch; + usbMIDI.sendProgramChange(activePatch-1,activeMIDIchannel); + dinMIDIsendProgramChange(activePatch-1,activeMIDIchannel-1); + if (readSetting(PATCH_ADDR) != activePatch) writeSetting(PATCH_ADDR,activePatch); + slurSustain = 0; + parallelChord = 0; + subOctaveDouble = 0; + doPatchUpdate = 0; + } + + readSwitches(); + fingeredNote=noteValueCheck(fingeredNote); + if (internalNote != fingeredNote) { + internalNote = fingeredNote; + internalFreqChange(); + } + + //gate always on - put code for note on here? + + if (pressureSensor > breathThrVal) { + // Value has risen above threshold. Move to the RISE_WAIT + // state. Record time and initial breath value. + breath_on_time = millis(); + initial_breath_value = pressureSensor; + mainState = RISE_WAIT; // Go to next state + } + specialKey=(touchRead(specialKeyPin) > touch_Thr); //S2 on pcb + if (lastSpecialKey != specialKey){ + if (specialKey){ + // special key just pressed, check other keys + readSwitches(); + if (K4) { + if (!slurSustain) { + slurSustain = 1; + parallelChord = 0; + rotatorOn = 0; + } else slurSustain = 0; + } + if (K5) { + if (!parallelChord) { + parallelChord = 1; + slurSustain = 0; + rotatorOn = 0; + } else parallelChord = 0; + } + if (K1) { + if (!subOctaveDouble) { + subOctaveDouble = 1; + rotatorOn = 0; + } else subOctaveDouble = 0; + } + if (!K1 && !K4 && !K5){ + slurSustain = 0; + parallelChord = 0; + subOctaveDouble = 0; + rotatorOn = 0; + } + if (pinkyKey){ + if (!rotatorOn) { + rotatorOn = 1; + slurSustain = 0; + parallelChord = 0; + subOctaveDouble = 0; + } else rotatorOn = 0; + } + } + } + lastSpecialKey = specialKey; + } else if (mainState == RISE_WAIT) { + if (pressureSensor > breathThrVal) { + // Has enough time passed for us to collect our second + // sample? + if ((millis() - breath_on_time > velSmpDl) || (0 == velSmpDl)) { + // Yes, so calculate MIDI note and velocity, then send a note on event + readSwitches(); + // We should be at tonguing peak, so set velocity based on current pressureSensor value unless fixed velocity is set + breathLevel=constrain(max(pressureSensor,initial_breath_value),breathThrVal,breathMaxVal); + if (!velocity) { + unsigned int breathValHires = breathCurve(map(constrain(breathLevel,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,0,16383)); + velocitySend = (breathValHires >>7) & 0x007F; + velocitySend = constrain(velocitySend+velocitySend*.1*velBias,1,127); + //velocitySend = map(constrain(max(pressureSensor,initial_breath_value),breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,1,127); + } else velocitySend = velocity; + breath(); // send breath data + internalBreath(); + fingeredNote=noteValueCheck(fingeredNote); + internalNote = fingeredNote; + internalFreqChange(); + if (priority){ // mono prio to last chord note + usbMIDI.sendNoteOn(fingeredNote, velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(fingeredNote, velocitySend, activeMIDIchannel - 1); + } + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]), velocitySend, activeMIDIchannel - 1); + } + } + if (slurSustain){ + usbMIDI.sendControlChange(64,127, activeMIDIchannel); + dinMIDIsendControlChange(64,127, activeMIDIchannel - 1); + slurBase = fingeredNote; + addedIntervals = 0; + } + if (subOctaveDouble){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote-12), velocitySend, activeMIDIchannel); + dinMIDIsendNoteOn(noteValueCheck(fingeredNote-12), velocitySend, activeMIDIchannel - 1); + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]-12), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]-12), velocitySend, activeMIDIchannel - 1); + } + } + } + if (rotatorOn){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+parallel), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+parallel), velocitySend, activeMIDIchannel - 1); + if (currentRotation < 3) currentRotation++; else currentRotation = 0; + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+rotations[currentRotation]), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+rotations[currentRotation]), velocitySend, activeMIDIchannel - 1); + } + if (!priority){ // mono prio to base note + usbMIDI.sendNoteOn(fingeredNote, velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(fingeredNote, velocitySend, activeMIDIchannel - 1); + } + activeNote=fingeredNote; + mainState = NOTE_ON; + } + } else { + // Value fell below threshold before velocity sample delay time passed. Return to + // NOTE_OFF state (e.g. we're ignoring a short blip of breath) + mainState = NOTE_OFF; + } + } else if (mainState == NOTE_ON) { + cursorBlinkTime = millis(); // keep display from updating with cursor blinking if note on + if (pressureSensor < breathThrVal) { + // Value has fallen below threshold - turn the note off + activeNote=noteValueCheck(activeNote); + if (priority){ + usbMIDI.sendNoteOff(activeNote, velocitySend, activeMIDIchannel); // send Note Off message + dinMIDIsendNoteOff(activeNote, velocitySend, activeMIDIchannel - 1); + } + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote+slurInterval[i]), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOff(noteValueCheck(activeNote+slurInterval[i]), velocitySend, activeMIDIchannel - 1); + } + } + if (subOctaveDouble){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote-12), velocitySend, activeMIDIchannel); + dinMIDIsendNoteOff(noteValueCheck(activeNote-12), velocitySend, activeMIDIchannel - 1); + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote+slurInterval[i]-12), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOff(noteValueCheck(activeNote+slurInterval[i]-12), velocitySend, activeMIDIchannel - 1); + } + } + } + if (rotatorOn){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote+parallel), velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(noteValueCheck(activeNote+parallel), velocitySend, activeMIDIchannel - 1); + usbMIDI.sendNoteOff(noteValueCheck(activeNote+rotations[currentRotation]), velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(noteValueCheck(activeNote+rotations[currentRotation]), velocitySend, activeMIDIchannel - 1); + } + if (!priority){ + usbMIDI.sendNoteOff(activeNote, velocitySend, activeMIDIchannel); // send Note Off message + dinMIDIsendNoteOff(activeNote, velocitySend, activeMIDIchannel - 1); + } + if (slurSustain){ + usbMIDI.sendControlChange(64,0, activeMIDIchannel); + dinMIDIsendControlChange(64,0, activeMIDIchannel - 1); + } + breathLevel=0; + mainState = NOTE_OFF; + } else { + readSwitches(); + if (fingeredNote != lastFingering){ // + // reset the debouncing timer + lastDeglitchTime = millis(); + } + if ((millis() - lastDeglitchTime) > deglitch) { + // whatever the reading is at, it's been there for longer + // than the debounce delay, so take it as the actual current state + if (noteValueCheck(fingeredNote) != activeNote) { + // Player has moved to a new fingering while still blowing. + // Send a note off for the current note and a note on for + // the new note. + if (!velocity){ + unsigned int breathValHires = breathCurve(map(constrain(breathLevel,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,0,16383)); + velocitySend = (breathValHires >>7) & 0x007F; + velocitySend = constrain(velocitySend+velocitySend*.1*velBias,1,127); + //velocitySend = map(constrain(pressureSensor,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,7,127); // set new velocity value based on current pressure sensor level + } + activeNote=noteValueCheck(activeNote); + if ((parallelChord || subOctaveDouble || rotatorOn) && priority){ // poly playing, send old note off before new note on + usbMIDI.sendNoteOff(activeNote, velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(activeNote, velocitySend, activeMIDIchannel - 1); + } + + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote+slurInterval[i]), velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(noteValueCheck(activeNote+slurInterval[i]), velocitySend, activeMIDIchannel - 1); + } + } + if (subOctaveDouble){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote-12), velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(noteValueCheck(activeNote-12), velocitySend, activeMIDIchannel - 1); + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote+slurInterval[i]-12), velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(noteValueCheck(activeNote+slurInterval[i]-12), velocitySend, activeMIDIchannel - 1); + } + } + } + if (rotatorOn){ + usbMIDI.sendNoteOff(noteValueCheck(activeNote+parallel), velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(noteValueCheck(activeNote+parallel), velocitySend, activeMIDIchannel - 1); + usbMIDI.sendNoteOff(noteValueCheck(activeNote+rotations[currentRotation]), velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(noteValueCheck(activeNote+rotations[currentRotation]), velocitySend, activeMIDIchannel - 1); + } + if ((parallelChord || subOctaveDouble || rotatorOn) && !priority){ // poly playing, send old note off before new note on + usbMIDI.sendNoteOff(activeNote, velocitySend, activeMIDIchannel); // send Note Off message for old note + dinMIDIsendNoteOff(activeNote, velocitySend, activeMIDIchannel - 1); + } + + + fingeredNote=noteValueCheck(fingeredNote); + internalNote = fingeredNote; + internalFreqChange(); + if (priority){ + usbMIDI.sendNoteOn(fingeredNote, velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(fingeredNote, velocitySend, activeMIDIchannel - 1); + } + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]), velocitySend, activeMIDIchannel - 1); + } + } + if (subOctaveDouble){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote-12), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote-12), velocitySend, activeMIDIchannel - 1); + if (parallelChord){ + for (int i=0; i < addedIntervals; i++){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]-12), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+slurInterval[i]-12), velocitySend, activeMIDIchannel - 1); + } + } + } + if (rotatorOn){ + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+parallel), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+parallel), velocitySend, activeMIDIchannel - 1); + if (currentRotation < 3) currentRotation++; else currentRotation = 0; + usbMIDI.sendNoteOn(noteValueCheck(fingeredNote+rotations[currentRotation]), velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(noteValueCheck(fingeredNote+rotations[currentRotation]), velocitySend, activeMIDIchannel - 1); + } + + if (!priority){ + usbMIDI.sendNoteOn(fingeredNote, velocitySend, activeMIDIchannel); // send Note On message for new note + dinMIDIsendNoteOn(fingeredNote, velocitySend, activeMIDIchannel - 1); + } + + if (!parallelChord && !subOctaveDouble && !rotatorOn){ // mono playing, send old note off after new note on + usbMIDI.sendNoteOff(activeNote, velocitySend, activeMIDIchannel); // send Note Off message + dinMIDIsendNoteOff(activeNote, velocitySend, activeMIDIchannel - 1); + } + + if (slurSustain){ + addedIntervals++; + slurInterval[addedIntervals-1] = fingeredNote - slurBase; + } + activeNote=fingeredNote; + } + } + } + } + // Is it time to send more CC data? + if (millis() - ccSendTime > CC_INTERVAL) { + // deal with Breath, Pitch Bend, Modulation, etc. + breath(); + internalBreath(); + pitch_bend(); + portamento_(); + extraController(); + statusLEDs(); + ccSendTime = millis(); + } + if (millis() - pixelUpdateTime > pixelUpdateInterval){ + // even if we just alter a pixel, the whole display is redrawn (35ms of MPU lockup) and we can't do that all the time + // this is one of the big reasons the display is for setup use only + drawSensorPixels(); // live sensor monitoring for the setup screens + pixelUpdateTime = millis(); + } + lastFingering=fingeredNote; + //do menu stuff + menu(); + } +} + +//_______________________________________________________________________________________________ FUNCTIONS + +// non linear mapping function (http://playground.arduino.cc/Main/MultiMap) +// note: the _in array should have increasing values +unsigned int multiMap(unsigned int val, unsigned int* _in, unsigned int* _out, uint8_t size) +{ + // take care the value is within range + // val = constrain(val, _in[0], _in[size-1]); + if (val <= _in[0]) return _out[0]; + if (val >= _in[size-1]) return _out[size-1]; + + // search right interval + uint8_t pos = 1; // _in[0] allready tested + while(val > _in[pos]) pos++; + + // this will handle all exact "points" in the _in array + if (val == _in[pos]) return _out[pos]; + + // interpolate in the right segment for the rest + return (val - _in[pos-1]) * (_out[pos] - _out[pos-1]) / (_in[pos] - _in[pos-1]) + _out[pos-1]; +} + +//************************************************************** + +// map breath values to selected curve +unsigned int breathCurve(unsigned int inputVal){ + // 0 to 16383, moving mid value up or down + switch (curve){ + case 0: + // -4 + return multiMap(inputVal,curveIn,curveM4,17); + break; + case 1: + // -3 + return multiMap(inputVal,curveIn,curveM3,17); + break; + case 2: + // -2 + return multiMap(inputVal,curveIn,curveM2,17); + break; + case 3: + // -1 + return multiMap(inputVal,curveIn,curveM1,17); + break; + case 4: + // 0, linear + return inputVal; + break; + case 5: + // +1 + return multiMap(inputVal,curveIn,curveP1,17); + break; + case 6: + // +2 + return multiMap(inputVal,curveIn,curveP2,17); + break; + case 7: + // +3 + return multiMap(inputVal,curveIn,curveP3,17); + break; + case 8: + // +4 + return multiMap(inputVal,curveIn,curveP4,17); + break; + case 9: + // S1 + return multiMap(inputVal,curveIn,curveS1,17); + break; + case 10: + // S2 + return multiMap(inputVal,curveIn,curveS2,17); + break; + case 11: + // Z1 + return multiMap(inputVal,curveIn,curveZ1,17); + break; + case 12: + // Z2 + return multiMap(inputVal,curveIn,curveZ2,17); + break; + } +} + +//************************************************************** +/* +int smooth(int data, float filterVal, float smoothedVal){ + + + if (filterVal > 1){ // check to make sure param's are within range + filterVal = .99; + } + else if (filterVal <= 0){ + filterVal = 0; + } + + smoothedVal = (data * (1 - filterVal)) + (smoothedVal * filterVal); + + return (int)smoothedVal; +} + +*/ +//************************************************************** + +// MIDI note number to frequency calculation +float numToFreq(int input) { + int number = input - 21; // set to midi note numbers = start with 21 at A0 + number = number - 60; // A0 is 48 steps below A4 = 440hz + return 440*(pow (1.059463094359,number)); +} + +//************************************************************** + +// MIDI note value check with out of range octave repeat +int noteValueCheck(int note){ + if (note > 127){ + note = 115+(note-127)%12; + } else if (note < 0) { + note = 12-abs(note)%12; + } + return note; +} + +//************************************************************** + +void midiPanic(){ // all notes off + usbMIDI.sendControlChange(123, 0, activeMIDIchannel); + dinMIDIsendControlChange(123, 0, activeMIDIchannel - 1); +} + +//************************************************************** + +void midiReset(){ // reset all controllers + usbMIDI.sendControlChange(121, 0, activeMIDIchannel); + dinMIDIsendControlChange(121, 0, activeMIDIchannel - 1); + usbMIDI.sendControlChange(7, 100, activeMIDIchannel); + dinMIDIsendControlChange(7, 100, activeMIDIchannel - 1); + usbMIDI.sendControlChange(11, 127, activeMIDIchannel); + dinMIDIsendControlChange(11, 127, activeMIDIchannel - 1); +} + +//************************************************************** + +// Send a three byte din midi message +void midiSend3B(byte midistatus, byte data1, byte data2) { + Serial3.write(midistatus); + Serial3.write(data1); + Serial3.write(data2); +} + +//************************************************************** + +// Send a two byte din midi message +void midiSend2B(byte midistatus, byte data) { + Serial3.write(midistatus); + Serial3.write(data); +} + +//************************************************************** + +// Send din pitchbend +void dinMIDIsendPitchBend(int pb, byte ch) { + int pitchLSB = pb & 0x007F; + int pitchMSB = (pb >>7) & 0x007F; + midiSend3B((0xE0 | ch), pitchLSB, pitchMSB); +} + +//************************************************************** + +// Send din control change +void dinMIDIsendControlChange(byte ccNumber, int cc, byte ch) { + midiSend3B((0xB0 | ch), ccNumber, cc); +} + +//************************************************************** + +// Send din note on +void dinMIDIsendNoteOn(byte note, int vel, byte ch) { + midiSend3B((0x90 | ch), note, vel); +} + +//************************************************************** + +// Send din note off +void dinMIDIsendNoteOff(byte note, int vel, byte ch) { + midiSend3B((0x80 | ch), note, vel); +} + +//************************************************************** + +// Send din aftertouch +void dinMIDIsendAfterTouch(byte value, byte ch) { + midiSend2B((0xD0 | ch), value); +} + +//************************************************************** + +// Send din program change +void dinMIDIsendProgramChange(byte value, byte ch) { + midiSend2B((0xC0 | ch), value); +} + +//************************************************************** + +void internalFreqChange(){ + if (midiToFreq[internalNote] > 20.0){ + waveform1.frequency(midiToFreq[internalNote]+internalPitchbend); + } +} + +//************************************************************** + +void internalBreath(){ + int intBreath; + breathLevel = constrain(pressureSensor,breathThrVal,breathMaxVal); + intBreath = breathCurve(map(constrain(breathLevel,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,0,1000*(cutoff+1))); + if (0 == intPatch){ + playVolume = constrain(internalVolume * intBreath/10000, 0, internalVolume); + //mixer2.gain(0, playVolume); + //mixer2.gain(1, 0); + } else { + //playVolume = constrain(internalVolume * intBreath/1000, 0.5, internalVolume); + //mixer2.gain(0, 0); + //mixer2.gain(1, playVolume); + filter1.frequency(intBreath); + } +} + +//************************************************************** + +void updateSynth(){ + if (vol > 9) vol = 9; // + internalVolume = 0.05 * vol; + if (0 == filter){ // internal + mixer2.gain(0, 0.00); + mixer2.gain(1, internalVolume); + } else { //external + mixer2.gain(0, internalVolume); + mixer2.gain(1, 0.00); + } + mixer2.gain(2, 0.00); + mixer2.gain(3, 0.00); + delay(100); + filter1.frequency(0); + filter1.resonance(0.7+0.1*reso); + switch (wave){ + case 0: + waveform1.begin(WAVEFORM_SAWTOOTH); + waveform1.amplitude(0.3); + break; + case 1: + waveform1.begin(WAVEFORM_SQUARE); + waveform1.amplitude(0.3); + break; + case 2: + waveform1.begin(WAVEFORM_ARBITRARY); + waveform1.amplitude(0.6); + break; + } + +} + +//************************************************************** + +void statusLEDs() { + if (breathLevel > breathThrVal){ // breath indicator LED, labeled "B" on PCB + analogWrite(bLedPin, map(constrain(breathLevel,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,500,breathLedBrightness)); + } else { + analogWrite(bLedPin, 0); + } + if (biteSensor > portamThrVal){ // portamento indicator LED, labeled "P" on PCB + analogWrite(pLedPin, map(constrain(biteSensor,portamThrVal,portamMaxVal),portamThrVal,portamMaxVal,500,portamLedBrightness)); + } else { + analogWrite(pLedPin, 0); + } +} + +//************************************************************** + +void breath(){ + int breathCCval,breathCCvalFine; + unsigned int breathCCvalHires; + breathLevel = constrain(pressureSensor,breathThrVal,breathMaxVal); + //breathLevel = breathLevel*0.6+pressureSensor*0.4; // smoothing of breathLevel value + ////////breathCCval = map(constrain(breathLevel,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,0,127); + breathCCvalHires = breathCurve(map(constrain(breathLevel,breathThrVal,breathMaxVal),breathThrVal,breathMaxVal,0,16383)); + breathCCval = (breathCCvalHires >>7) & 0x007F; + breathCCvalFine = breathCCvalHires & 0x007F; + + if (breathCCval != oldbreath){ // only send midi data if breath has changed from previous value + if (breathCC){ + // send midi cc + usbMIDI.sendControlChange(ccList[breathCC], breathCCval, activeMIDIchannel); + dinMIDIsendControlChange(ccList[breathCC], breathCCval, activeMIDIchannel - 1); + } + if (breathAT){ + // send aftertouch + usbMIDI.sendAfterTouch(breathCCval, activeMIDIchannel); + dinMIDIsendAfterTouch(breathCCval, activeMIDIchannel - 1); + } + oldbreath = breathCCval; + } + + if (breathCCvalHires != oldbreathhires){ + if (breathCC > 4){ // send high resolution midi + usbMIDI.sendControlChange(ccList[breathCC]+32, breathCCvalFine, activeMIDIchannel); + dinMIDIsendControlChange(ccList[breathCC]+32, breathCCvalFine, activeMIDIchannel - 1); + } + oldbreathhires = breathCCvalHires; + } +} + +//************************************************************** + +void pitch_bend(){ + // handle input from pitchbend touchpads and + // on-pcb variable capacitor for vibrato. + float nudge; + int calculatedPBdepth; + byte vibratoMoved = 0; + pbUp = touchRead(pbUpPin); // SENSOR PIN 23 - PCB PIN "Pu" + pbDn = touchRead(pbDnPin); // SENSOR PIN 22 - PCB PIN "Pd" + halfPitchBendKey = (pinkySetting == PBD) && (touchRead(halfPitchBendKeyPin) > touch_Thr); // SENSOR PIN 1 - PCB PIN "S1" - hold for 1/2 pitchbend value + int vibRead = touchRead(vibratoPin); // SENSOR PIN 15 - built in var cap + if (PBdepth){ + calculatedPBdepth = pbDepthList[PBdepth]; + if (halfPitchBendKey) calculatedPBdepth = calculatedPBdepth*0.5; + } + if (((vibRead < vibThr) || (vibRead > vibThrLo))&&(vibRead > oldvibRead)){ + nudge = 0.01*constrain(abs(vibRead - oldvibRead),0,100); + if (!dirUp){ + pitchBend=oldpb*(1-nudge)+nudge*(8192 + calculatedPBdepth*vibDepth[vibrato]); + //ipb=oldipb*(1-nudge)+nudge*(8192 + 8192*vibDepth[vibrato]); + vibratoMoved = 1; + } else { + pitchBend=oldpb*(1-nudge)+nudge*(8191 - calculatedPBdepth*vibDepth[vibrato]); + //ipb=oldipb*(1-nudge)+nudge*(8192 - 8192*vibDepth[vibrato]); + vibratoMoved = 1; + } + } else if (((vibRead < vibThr) || (vibRead > vibThrLo))&&(vibRead < oldvibRead)){ + nudge = 0.01*constrain(abs(vibRead - oldvibRead),0,100); + if (!dirUp ){ + pitchBend=oldpb*(1-nudge)+nudge*(8191 - calculatedPBdepth*vibDepth[vibrato]); + //ipb=oldipb*(1-nudge)+nudge*(8192 - 8192*vibDepth[vibrato]); + vibratoMoved = 1; + } else { + pitchBend=oldpb*(1-nudge)+nudge*(8192 + calculatedPBdepth*vibDepth[vibrato]); + //ipb=oldipb*(1-nudge)+nudge*(8192 + 8192*vibDepth[vibrato]); + vibratoMoved = 1; + } + } else { + vibratoMoved = 0; + } + + oldvibRead = vibRead; + + if ((pbUp > pitchbThrVal) && PBdepth){ + pitchBend=pitchBend*0.6+0.4*map(constrain(pbUp,pitchbThrVal,pitchbMaxVal),pitchbThrVal,pitchbMaxVal,8192,(8193 + calculatedPBdepth)); + //ipb=ipb*0.6+0.4*map(constrain(pbUp,pitchbThrVal,pitchbMaxVal),pitchbThrVal,pitchbMaxVal,8192,16383); + } else if ((pbDn > pitchbThrVal) && PBdepth){ + pitchBend=pitchBend*0.6+0.4*map(constrain(pbDn,pitchbThrVal,pitchbMaxVal),pitchbThrVal,pitchbMaxVal,8192,(8192 - calculatedPBdepth)); + //ipb=ipb*0.6+0.4*map(constrain(pbDn,pitchbThrVal,pitchbMaxVal),pitchbThrVal,pitchbMaxVal,8192,0); + } else if (oldvibRead > vibThr){ + pitchBend = pitchBend*0.6+8192*0.4; // released, so smooth your way back to zero + if ((pitchBend > 8187) && (pitchBend < 8197)) { + pitchBend = 8192; // 8192 is 0 pitch bend, don't miss it bc of smoothing + //ipb = 8192; + } + } else if (!vibratoMoved){ + pitchBend = oldpb*0.8+8192*0.2; // released, so smooth your way back to zero + if ((pitchBend > 8187) && (pitchBend < 8197)) { + pitchBend = 8192; // 8192 is 0 pitch bend, don't miss it bc of smoothing + //ipb = 8192; + } + } + pitchBend=constrain(pitchBend, 0, 16383); + //ipb=constrain(ipb, 0, 16383); + + if (pitchBend != oldpb){// only send midi data if pitch bend has changed from previous value + usbMIDI.sendPitchBend(pitchBend-8192, activeMIDIchannel); // newer teensyduino "pitchBend-8192" older just "pitchBend"... strange thing to change + dinMIDIsendPitchBend(pitchBend, activeMIDIchannel - 1); + cents = (pitchBend - 8192)/40; + internalPitchbend = (midiToFreq[internalNote]*pow(cent,cents)) - midiToFreq[internalNote]; + internalFreqChange(); + + oldpb=pitchBend; + } + /*if (ipb != oldipb){ // only alter signal data if pitch bend has changed from previous value + cents = (ipb - 8192)/40; + internalPitchbend = (midiToFreq[internalNote]*pow(cent,cents)) - midiToFreq[internalNote]; + internalFreqChange(); + oldipb=ipb; + }*/ +} + +//*********************************************************** + +void extraController(){ + // Extra Controller is the lip touch sensor (proportional) in front of the mouthpiece + exSensor=exSensor*0.6+0.4*touchRead(extraPin); // get sensor data, do some smoothing - SENSOR PIN 16 - PCB PIN "EC" (marked K4 on some prototype boards) + if (extraCT && (exSensor >= extracThrVal)) { // if we are enabled and over the threshold, send data + if (!extracIsOn) { + extracIsOn=1; + if (extraCT == 4){ //Sustain ON + usbMIDI.sendControlChange(64,127, activeMIDIchannel); + dinMIDIsendControlChange(64,127, activeMIDIchannel - 1); + } + } + if (extraCT == 1){ //Send modulation + int extracCC = map(constrain(exSensor,extracThrVal,extracMaxVal),extracThrVal,extracMaxVal,1,127); + if (extracCC != oldextrac){ + usbMIDI.sendControlChange(1,extracCC, activeMIDIchannel); + dinMIDIsendControlChange(1,extracCC, activeMIDIchannel - 1); + } + oldextrac = extracCC; + } + if (extraCT == 2){ //Send foot pedal (CC#4) + int extracCC = map(constrain(exSensor,extracThrVal,extracMaxVal),extracThrVal,extracMaxVal,1,127); + if (extracCC != oldextrac){ + usbMIDI.sendControlChange(4,extracCC, activeMIDIchannel); + dinMIDIsendControlChange(4,extracCC, activeMIDIchannel - 1); + } + oldextrac = extracCC; + } + if (extraCT == 3){ //Send filter cutoff (CC#74) + int extracCC = map(constrain(exSensor,extracThrVal,extracMaxVal),extracThrVal,extracMaxVal,1,127); + if (extracCC != oldextrac){ + usbMIDI.sendControlChange(74,extracCC, activeMIDIchannel); + dinMIDIsendControlChange(74,extracCC, activeMIDIchannel - 1); + } + oldextrac = extracCC; + } + } else if (extracIsOn) { // we have just gone below threshold, so send zero value + extracIsOn=0; + if (extraCT == 1){ //MW + //send modulation 0 + usbMIDI.sendControlChange(1,0, activeMIDIchannel); + dinMIDIsendControlChange(1,0, activeMIDIchannel - 1); + oldextrac = 0; + } else if (extraCT == 2){ //FP + //send foot pedal 0 + usbMIDI.sendControlChange(4,0, activeMIDIchannel); + dinMIDIsendControlChange(4,0, activeMIDIchannel - 1); + oldextrac = 0; + } else if (extraCT == 3){ //FC + //send foot pedal 0 + usbMIDI.sendControlChange(74,0, activeMIDIchannel); + dinMIDIsendControlChange(74,0, activeMIDIchannel - 1); + oldextrac = 0; + } else if (extraCT == 4){ //SP + //send sustain off + usbMIDI.sendControlChange(64,0, activeMIDIchannel); + dinMIDIsendControlChange(64,0, activeMIDIchannel - 1); + } + } +} + +//*********************************************************** + +void portamento_(){ + // Portamento is controlled with the bite sensor (variable capacitor) in the mouthpiece + biteSensor=biteSensor*0.6+0.4*touchRead(bitePin); // get sensor data, do some smoothing - SENSOR PIN 17 - PCB PINS LABELED "BITE" (GND left, sensor pin right) + if (portamento && (biteSensor >= portamThrVal)) { // if we are enabled and over the threshold, send portamento + if (!portIsOn) { + portOn(); + } + port(); + } else if (portIsOn) { // we have just gone below threshold, so send zero value + portOff(); + } +} + +//*********************************************************** + +void portOn(){ + if (portamento == 2){ // if portamento midi switching is enabled + usbMIDI.sendControlChange(CCN_PortOnOff, 127, activeMIDIchannel); + dinMIDIsendControlChange(CCN_PortOnOff, 127, activeMIDIchannel - 1); + } + portIsOn=1; +} + +//*********************************************************** + +void port(){ + int portCC; + portCC = map(constrain(biteSensor,portamThrVal,portamMaxVal),portamThrVal,portamMaxVal,0,127); + if (portCC!=oldport){ + usbMIDI.sendControlChange(CCN_Port, portCC, activeMIDIchannel); + dinMIDIsendControlChange(CCN_Port, portCC, activeMIDIchannel - 1); + } + oldport = portCC; +} + +//*********************************************************** + +void portOff(){ + usbMIDI.sendControlChange(CCN_Port, 0, activeMIDIchannel); + dinMIDIsendControlChange(CCN_Port, 0, activeMIDIchannel - 1); + if (portamento == 2){ // if portamento midi switching is enabled + usbMIDI.sendControlChange(CCN_PortOnOff, 0, activeMIDIchannel); + dinMIDIsendControlChange(CCN_PortOnOff, 0, activeMIDIchannel - 1); + } + portIsOn=0; + oldport = 0; +} + +//*********************************************************** + +void readSwitches(){ + int qTransp; + // Read touch pads (MPR121) and put value in variables + int touchValue[12]; + for (byte i=0; i<12; i++){ + touchValue[i]=touchSensor.filteredData(i); + } + + // Octave rollers + octaveR = 0; + if ((touchValue[R5Pin] < ctouchThrVal) && (touchValue[R3Pin] < ctouchThrVal)) octaveR = 6; //R6 = R5 && R3 + else if (touchValue[R5Pin] < ctouchThrVal) octaveR = 5; //R5 + else if (touchValue[R4Pin] < ctouchThrVal) octaveR = 4; //R4 + else if (touchValue[R3Pin] < ctouchThrVal) octaveR = 3; //R3 + else if (touchValue[R2Pin] < ctouchThrVal) octaveR = 2; //R2 + else if (touchValue[R1Pin] < ctouchThrVal) octaveR = 1; //R1 + + // Valves and trill keys + K4=(touchValue[K4Pin] < ctouchThrVal); + K1=(touchValue[K1Pin] < ctouchThrVal); + K2=(touchValue[K2Pin] < ctouchThrVal); + K3=(touchValue[K3Pin] < ctouchThrVal); + K5=(touchValue[K5Pin] < ctouchThrVal); + K6=(touchValue[K6Pin] < ctouchThrVal); + K7=(touchValue[K7Pin] < ctouchThrVal); + + pinkyKey = (touchRead(halfPitchBendKeyPin) > touch_Thr); // SENSOR PIN 1 - PCB PIN "S1" + + if ((pinkySetting < 12) && pinkyKey){ + qTransp = pinkySetting - 12; + } else if ((pinkySetting > 12) && pinkyKey){ + qTransp = pinkySetting - 12; + } else { + qTransp = 0; + } + + + // Calculate midi note number from pressed keys + fingeredNote=startNote-2*K1-K2-3*K3-5*K4+2*K5+K6+4*K7+octaveR*12+(octave-3)*12+transpose-12+qTransp; +} + +//*********************************************************** + +int readTrills(){ + readSwitches(); + return K5+2*K6+4*K7; +} + +//*********************************************************** + +void setFPS(int trills){ + fastPatch[trills-1] = patch; + writeSetting(FP1_ADDR+2*(trills-1),patch); + FPD = 2; +} + +//*********************************************************** + +void clearFPS(int trills){ + fastPatch[trills-1] = 0; + writeSetting(FP1_ADDR+2*(trills-1),0); + FPD = 3; +} + + +// MENU STUFF FROM THIS POINT <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< + + + + + + + + + + + +void menu() { + + // read the state of the switches + deumButtons = !digitalRead(dPin)+2*!digitalRead(ePin)+4*!digitalRead(uPin)+8*!digitalRead(mPin); + + // check to see if you just pressed the button + // (i.e. the input went from LOW to HIGH), and you've waited long enough + // since the last press to ignore any noise: + + // If the switch changed, due to noise or pressing: + if (deumButtons != lastDeumButtons) { + // reset the debouncing timer + lastDebounceTime = millis(); + } + + if ((millis() - lastDebounceTime) > debounceDelay) { + // whatever the reading is at, it's been there for longer than the debounce + // delay, so take it as the actual current state: + + // if the button state has changed: + if (deumButtons != deumButtonState) { + deumButtonState = deumButtons; + menuTime = millis(); + Serial.println(deumButtonState); + buttonPressedAndNotUsed = 1; + buttonPressedTime = millis(); + } + + if (((deumButtons == 1) || (deumButtons == 4)) && (millis() - buttonPressedTime > buttonRepeatDelay) && (millis() - buttonRepeatTime > buttonRepeatInterval)){ + buttonPressedAndNotUsed = 1; + buttonRepeatTime = millis(); + } + + } + + + // save the reading. Next time through the loop, it'll be the lastButtonState: + lastDeumButtons = deumButtons; + + if (state && ((millis() - menuTime) > menuTimeUp)) { // shut off menu system if not used for a while (changes not stored by exiting a setting manually will not be stored in EEPROM) + state = DISPLAYOFF_IDL; + stateFirstRun = 1; + subTranspose = 0; + subMIDI = 0; + subBreathCC = 0; + subBreathAT = 0; + subVelocity = 0; + subPort = 0; + subPB = 0; + subExtra = 0; + subVibrato = 0; + subDeglitch = 0; + subPinky = 0; + subVelSmpDl = 0; + subVelBias = 0; + subParallel = 0; + subRotator = 0; + subPriority = 0; + subWave = 0; + subCutoff = 0; + subReso = 0; + subFilter = 0; + subVolume = 0; + } + + + + if (state == DISPLAYOFF_IDL){ + if (stateFirstRun) { + display.ssd1306_command(SSD1306_DISPLAYOFF); + stateFirstRun = 0; + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + int trills = readTrills(); + switch (deumButtonState){ + case 1: + // down + if (trills && (fastPatch[trills-1] > 0)){ + patch = fastPatch[trills-1]; + activePatch = 0; + doPatchUpdate = 1; + FPD = 1; + } else if (!trills) buttonPressedAndNotUsed = 1; + display.ssd1306_command(SSD1306_DISPLAYON); + state = PATCH_VIEW; + stateFirstRun = 1; + break; + case 2: + // enter + if (trills && (fastPatch[trills-1] > 0)){ + patch = fastPatch[trills-1]; + activePatch = 0; + doPatchUpdate = 1; + FPD = 1; + } + display.ssd1306_command(SSD1306_DISPLAYON); + state = PATCH_VIEW; + stateFirstRun = 1; + break; + case 4: + // up + if (trills && (fastPatch[trills-1] > 0)){ + patch = fastPatch[trills-1]; + activePatch = 0; + doPatchUpdate = 1; + FPD = 1; + } else if (!trills) buttonPressedAndNotUsed = 1; + display.ssd1306_command(SSD1306_DISPLAYON); + state = PATCH_VIEW; + buttonPressedAndNotUsed = 1; + stateFirstRun = 1; + break; + case 8: + // menu + display.ssd1306_command(SSD1306_DISPLAYON); + if (pinkyKey){ + state = ROTATOR_MENU; + } else if (specialKey){ + state = SYNTH_MENU; + } else { + state = MAIN_MENU; + } + stateFirstRun = 1; + break; + case 15: + //all keys depressed, reboot to programming mode + _reboot_Teensyduino_(); + } + } + } else if (state == PATCH_VIEW){ + if (stateFirstRun) { + drawPatchView(); + patchViewTime = millis(); + stateFirstRun = 0; + } + if ((millis() - patchViewTime) > patchViewTimeUp) { + state = DISPLAYOFF_IDL; + stateFirstRun = 1; + doPatchUpdate = 1; + FPD = 0; + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + int trills = readTrills(); + switch (deumButtonState){ + case 1: + // down + if (trills && (fastPatch[trills-1] > 0)){ + patch = fastPatch[trills-1]; + activePatch = 0; + doPatchUpdate = 1; + FPD = 1; + } else if (!trills){ + if (patch > 1){ + patch--; + } else patch = 128; + FPD = 0; + } + drawPatchView(); + patchViewTime = millis(); + break; + case 2: + // enter + if (trills && (fastPatch[trills-1] > 0)){ + patch = fastPatch[trills-1]; + activePatch = 0; + doPatchUpdate = 1; + FPD = 1; + drawPatchView(); + } + patchViewTime = millis(); + break; + case 4: + // up + if (trills && (fastPatch[trills-1] > 0)){ + patch = fastPatch[trills-1]; + activePatch = 0; + doPatchUpdate = 1; + FPD = 1; + } else if (!trills){ + if (patch < 128){ + patch++; + } else patch = 1; + FPD = 0; + } + drawPatchView(); + patchViewTime = millis(); + break; + case 8: + // menu + if (FPD < 2){ + state = DISPLAYOFF_IDL; + stateFirstRun = 1; + doPatchUpdate = 1; + } + FPD = 0; + break; + case 10: + // enter + menu + midiPanic(); + midiReset(); + display.clearDisplay(); + display.setTextColor(WHITE); + display.setTextSize(2); + display.setCursor(35,15); + display.println("DON'T"); + display.setCursor(35,30); + display.println("PANIC"); + display.display(); + patchViewTime = millis(); + break; + case 15: + //all keys depressed, reboot to programming mode + _reboot_Teensyduino_(); + } + } + } else if (state == MAIN_MENU){ // MAIN MENU HERE <<<<<<<<<<<<<<< + if (stateFirstRun) { + drawMenuScreen(); + stateFirstRun = 0; + } + if (subTranspose){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotTranspose(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (transpose > 0){ + plotTranspose(BLACK); + transpose--; + plotTranspose(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotTranspose(WHITE); + cursorNow = BLACK; + display.display(); + subTranspose = 0; + if (readSetting(TRANSP_ADDR) != transpose) writeSetting(TRANSP_ADDR,transpose); + break; + case 4: + // up + if (transpose < 24){ + plotTranspose(BLACK); + transpose++; + plotTranspose(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotTranspose(WHITE); + cursorNow = BLACK; + display.display(); + subTranspose = 0; + if (readSetting(TRANSP_ADDR) != transpose) writeSetting(TRANSP_ADDR,transpose); + break; + } + } + } else if (subOctave){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotOctave(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (octave > 0){ + plotOctave(BLACK); + octave--; + plotOctave(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotOctave(WHITE); + cursorNow = BLACK; + display.display(); + subOctave = 0; + if (readSetting(OCTAVE_ADDR) != octave) writeSetting(OCTAVE_ADDR,octave); + break; + case 4: + // up + if (octave < 6){ + plotOctave(BLACK); + octave++; + plotOctave(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotOctave(WHITE); + cursorNow = BLACK; + display.display(); + subOctave = 0; + if (readSetting(OCTAVE_ADDR) != octave) writeSetting(OCTAVE_ADDR,octave); + break; + } + } + } else if (subMIDI) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotMIDI(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (MIDIchannel > 1){ + plotMIDI(BLACK); + MIDIchannel--; + plotMIDI(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotMIDI(WHITE); + cursorNow = BLACK; + display.display(); + subMIDI = 0; + if (readSetting(MIDI_ADDR) != MIDIchannel) writeSetting(MIDI_ADDR,MIDIchannel); + break; + case 4: + // up + if (MIDIchannel < 16){ + plotMIDI(BLACK); + MIDIchannel++; + plotMIDI(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotMIDI(WHITE); + cursorNow = BLACK; + display.display(); + subMIDI = 0; + if (readSetting(MIDI_ADDR) != MIDIchannel) writeSetting(MIDI_ADDR,MIDIchannel); + break; + } + } + } else { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawMenuCursor(mainMenuCursor, cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + int trills = readTrills(); + switch (deumButtonState){ + case 1: + // down + if (mainMenuCursor < 6){ + drawMenuCursor(mainMenuCursor, BLACK); + mainMenuCursor++; + drawMenuCursor(mainMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 2: + // enter + selectMainMenu(); + break; + case 4: + // up + if (mainMenuCursor > 1){ + drawMenuCursor(mainMenuCursor, BLACK); + mainMenuCursor--; + drawMenuCursor(mainMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 8: + // menu + state = DISPLAYOFF_IDL; + stateFirstRun = 1; + break; + case 9: + //menu+down + + break; + case 10: + //menu+enter + if (trills){ + state = PATCH_VIEW; + stateFirstRun = 1; + setFPS(trills); + } + break; + case 12: + //menu+up + if (trills){ + state = PATCH_VIEW; + stateFirstRun = 1; + clearFPS(trills); + + } + break; + } + } + } + } else if (state == ROTATOR_MENU){ // ROTATOR MENU HERE <<<<<<<<<<<<<<< + if (stateFirstRun) { + drawRotatorMenuScreen(); + stateFirstRun = 0; + } + if (subParallel){ + if (((millis() - cursorBlinkTime) > cursorBlinkInterval) || forceRedraw) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + if (forceRedraw){ + forceRedraw = 0; + cursorNow = WHITE; + } + plotRotator(cursorNow,parallel); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (parallel > -24){ + plotRotator(BLACK,parallel); + parallel--; + plotRotator(WHITE,parallel); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotRotator(WHITE,parallel); + cursorNow = BLACK; + display.display(); + subParallel = 0; + if (readSetting(PARAL_ADDR) != (parallel + 24)) writeSetting(PARAL_ADDR,(parallel + 24)); + break; + case 4: + // up + if (parallel < 24){ + plotRotator(BLACK,parallel); + parallel++; + plotRotator(WHITE,parallel); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotRotator(WHITE,parallel); + cursorNow = BLACK; + display.display(); + subParallel = 0; + if (readSetting(PARAL_ADDR) != (parallel + 24)) writeSetting(PARAL_ADDR,(parallel + 24)); + break; + } + } + } else if (subRotator){ + if (((millis() - cursorBlinkTime) > cursorBlinkInterval) || forceRedraw) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + if (forceRedraw){ + forceRedraw = 0; + cursorNow = WHITE; + } + plotRotator(cursorNow,rotations[subRotator-1]); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (rotations[subRotator-1] > -24){ + plotRotator(BLACK,rotations[subRotator-1]); + rotations[subRotator-1]--; + plotRotator(WHITE,rotations[subRotator-1]); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotRotator(WHITE,rotations[subRotator-1]); + cursorNow = BLACK; + display.display(); + if (readSetting(ROTN1_ADDR+2*(subRotator-1)) != rotations[subRotator-1]) writeSetting(ROTN1_ADDR+2*(subRotator-1),(rotations[subRotator-1]+24)); + subRotator = 0; + break; + case 4: + // up + if (rotations[subRotator-1] < 24){ + plotRotator(BLACK,rotations[subRotator-1]); + rotations[subRotator-1]++; + plotRotator(WHITE,rotations[subRotator-1]); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotRotator(WHITE,rotations[subRotator-1]); + cursorNow = BLACK; + display.display(); + if (readSetting(ROTN1_ADDR+2*(subRotator-1)) != (rotations[subRotator-1]+24)) writeSetting(ROTN1_ADDR+2*(subRotator-1),(rotations[subRotator-1]+24)); + subRotator = 0; + break; + } + } + } else if (subPriority){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotPriority(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotPriority(BLACK); + priority = !priority; + plotPriority(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotPriority(WHITE); + cursorNow = BLACK; + display.display(); + subPriority = 0; + if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + case 4: + // up + plotPriority(BLACK); + priority = !priority; + plotPriority(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotPriority(WHITE); + cursorNow = BLACK; + display.display(); + subPriority = 0; + if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + } + } + } else { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawMenuCursor(rotatorMenuCursor, cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + int trills = readTrills(); + switch (deumButtonState){ + case 1: + // down + if (rotatorMenuCursor < 6){ + drawMenuCursor(rotatorMenuCursor, BLACK); + rotatorMenuCursor++; + drawMenuCursor(rotatorMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 2: + // enter + selectRotatorMenu(); + break; + case 4: + // up + if (rotatorMenuCursor > 1){ + drawMenuCursor(rotatorMenuCursor, BLACK); + rotatorMenuCursor--; + drawMenuCursor(rotatorMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 8: + // menu + state = DISPLAYOFF_IDL; + stateFirstRun = 1; + break; + case 9: + //menu+down + + break; + case 10: + //menu+enter + if (trills){ + state = PATCH_VIEW; + stateFirstRun = 1; + setFPS(trills); + } + break; + case 12: + //menu+up + if (trills){ + state = PATCH_VIEW; + stateFirstRun = 1; + clearFPS(trills); + + } + break; + } + } + } + // end rotator menu + } else if (state == SYNTH_MENU){ // SYNTH MENU HERE <<<<<<<<<<<<<<< + if (stateFirstRun) { + drawSynthMenuScreen(); + stateFirstRun = 0; + } + if (subWave){ + if (((millis() - cursorBlinkTime) > cursorBlinkInterval) || forceRedraw) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + if (forceRedraw){ + forceRedraw = 0; + cursorNow = WHITE; + } + plotWave(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (wave > 0){ + plotWave(BLACK); + wave--; + plotWave(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotWave(WHITE); + cursorNow = BLACK; + display.display(); + subWave = 0; + // if (readSetting(PARAL_ADDR) != (parallel + 24)) writeSetting(PARAL_ADDR,(parallel + 24)); + break; + case 4: + // up + if (wave < 2){ + plotWave(BLACK); + wave++; + plotWave(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotWave(WHITE); + cursorNow = BLACK; + display.display(); + subWave = 0; + //if (readSetting(PARAL_ADDR) != (parallel + 24)) writeSetting(PARAL_ADDR,(parallel + 24)); + break; + } + updateSynth(); + } + } else if (subCutoff){ + if (((millis() - cursorBlinkTime) > cursorBlinkInterval) || forceRedraw) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + if (forceRedraw){ + forceRedraw = 0; + cursorNow = WHITE; + } + plotCutoff(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (cutoff > 0){ + plotCutoff(BLACK); + cutoff--; + plotCutoff(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotCutoff(WHITE); + cursorNow = BLACK; + display.display(); + //if (readSetting(ROTN1_ADDR+2*(subRotator-1)) != rotations[subRotator-1]) writeSetting(ROTN1_ADDR+2*(subRotator-1),(rotations[subRotator-1]+24)); + subCutoff = 0; + break; + case 4: + // up + if (cutoff < 9){ + plotCutoff(BLACK); + cutoff++; + plotCutoff(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotCutoff(WHITE); + cursorNow = BLACK; + display.display(); + //if (readSetting(ROTN1_ADDR+2*(subRotator-1)) != (rotations[subRotator-1]+24)) writeSetting(ROTN1_ADDR+2*(subRotator-1),(rotations[subRotator-1]+24)); + subCutoff = 0; + break; + } + updateSynth(); + } + } else if (subReso){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotReso(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (reso > 0){ + plotReso(BLACK); + reso--; + plotReso(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotReso(WHITE); + cursorNow = BLACK; + display.display(); + subReso = 0; + // if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + case 4: + // up + if (reso < 9){ + plotReso(BLACK); + reso++; + plotReso(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotReso(WHITE); + cursorNow = BLACK; + display.display(); + subReso = 0; + // if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + } + updateSynth(); + } + } else if (subVolume){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotVol(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (vol > 0){ + plotVol(BLACK); + vol--; + plotVol(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotVol(WHITE); + cursorNow = BLACK; + display.display(); + subVolume = 0; + // if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + case 4: + // up + if (vol < 9){ + plotVol(BLACK); + vol++; + plotVol(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotVol(WHITE); + cursorNow = BLACK; + display.display(); + subVolume = 0; + // if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + } + updateSynth(); + } + } else if (subFilter){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotFilter(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotFilter(BLACK); + filter = !filter; + plotFilter(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotFilter(WHITE); + cursorNow = BLACK; + display.display(); + subFilter = 0; + //if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + case 4: + // up + plotFilter(BLACK); + filter = !filter; + plotFilter(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotFilter(WHITE); + cursorNow = BLACK; + display.display(); + subFilter = 0; + //if (readSetting(PRIO_ADDR) != priority) writeSetting(PRIO_ADDR,priority); + break; + } + updateSynth(); + } + } else { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawMenuCursor(synthMenuCursor, cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + int trills = readTrills(); + switch (deumButtonState){ + case 1: + // down + if (synthMenuCursor < 5){ + drawMenuCursor(synthMenuCursor, BLACK); + synthMenuCursor++; + drawMenuCursor(synthMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 2: + // enter + selectSynthMenu(); + break; + case 4: + // up + if (synthMenuCursor > 1){ + drawMenuCursor(synthMenuCursor, BLACK); + synthMenuCursor--; + drawMenuCursor(synthMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 8: + // menu + state = DISPLAYOFF_IDL; + stateFirstRun = 1; + break; + case 9: + //menu+down + + break; + case 10: + //menu+enter + if (trills){ + state = PATCH_VIEW; + stateFirstRun = 1; + setFPS(trills); + } + break; + case 12: + //menu+up + if (trills){ + state = PATCH_VIEW; + stateFirstRun = 1; + clearFPS(trills); + + } + break; + } + } + } + // end synth menu + } else if (state == BREATH_ADJ_IDL){ + if (stateFirstRun) { + drawBreathScreen(); + forcePix = 1; + stateFirstRun = 0; + } + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawAdjCursor(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + state = PORTAM_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(BREATH_THR_ADDR) != breathThrVal) writeSetting(BREATH_THR_ADDR,breathThrVal); + if (readSetting(BREATH_MAX_ADDR) != breathMaxVal) writeSetting(BREATH_MAX_ADDR,breathMaxVal); + break; + case 2: + // enter + state = BREATH_ADJ_THR; + break; + case 4: + // up + state = CTOUCH_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(BREATH_THR_ADDR) != breathThrVal) writeSetting(BREATH_THR_ADDR,breathThrVal); + if (readSetting(BREATH_MAX_ADDR) != breathMaxVal) writeSetting(BREATH_MAX_ADDR,breathMaxVal); + break; + case 8: + // menu + state = MAIN_MENU; + stateFirstRun = 1; + if (readSetting(BREATH_THR_ADDR) != breathThrVal) writeSetting(BREATH_THR_ADDR,breathThrVal); + if (readSetting(BREATH_MAX_ADDR) != breathMaxVal) writeSetting(BREATH_MAX_ADDR,breathMaxVal); + break; + } + } + } else if (state == BREATH_ADJ_THR){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos1,20,pos1,26,cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (breathThrVal - breathStep > breathLoLimit){ + breathThrVal -= breathStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(breathThrVal, breathLoLimit, breathHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = BREATH_ADJ_MAX; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + case 4: + // up + if (breathThrVal + breathStep < breathHiLimit){ + breathThrVal += breathStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(breathThrVal, breathLoLimit, breathHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = BREATH_ADJ_IDL; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + } + } + } else if (state == BREATH_ADJ_MAX){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos2,50,pos2,57,cursorNow);; + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if ((breathMaxVal - breathStep) > (breathThrVal + minOffset)){ + breathMaxVal -= breathStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(breathMaxVal, breathLoLimit, breathHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = BREATH_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + case 4: + // up + if (breathMaxVal + breathStep < breathHiLimit){ + breathMaxVal += breathStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(breathMaxVal, breathLoLimit, breathHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = BREATH_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + } + } + } else if (state == PORTAM_ADJ_IDL){ + if (stateFirstRun) { + drawPortamScreen(); + forcePix = 1; + stateFirstRun = 0; + } + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawAdjCursor(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + state = PITCHB_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(PORTAM_THR_ADDR) != portamThrVal) writeSetting(PORTAM_THR_ADDR,portamThrVal); + if (readSetting(PORTAM_MAX_ADDR) != portamMaxVal) writeSetting(PORTAM_MAX_ADDR,portamMaxVal); + break; + case 2: + // enter + state = PORTAM_ADJ_THR; + break; + case 4: + // up + state = BREATH_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(PORTAM_THR_ADDR) != portamThrVal) writeSetting(PORTAM_THR_ADDR,portamThrVal); + if (readSetting(PORTAM_MAX_ADDR) != portamMaxVal) writeSetting(PORTAM_MAX_ADDR,portamMaxVal); + break; + case 8: + // menu + state = MAIN_MENU; + stateFirstRun = 1; + if (readSetting(PORTAM_THR_ADDR) != portamThrVal) writeSetting(PORTAM_THR_ADDR,portamThrVal); + if (readSetting(PORTAM_MAX_ADDR) != portamMaxVal) writeSetting(PORTAM_MAX_ADDR,portamMaxVal); + break; + } + } + } else if (state == PORTAM_ADJ_THR){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos1,20,pos1,26,cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (portamThrVal - portamStep > portamLoLimit){ + portamThrVal -= portamStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(portamThrVal, portamLoLimit, portamHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = PORTAM_ADJ_MAX; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + case 4: + // up + if (portamThrVal + portamStep < portamHiLimit){ + portamThrVal += portamStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(portamThrVal, portamLoLimit, portamHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = PORTAM_ADJ_IDL; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + } + } + } else if (state == PORTAM_ADJ_MAX){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos2,50,pos2,57,cursorNow);; + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if ((portamMaxVal - portamStep) > (portamThrVal + minOffset)){ + portamMaxVal -= portamStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(portamMaxVal, portamLoLimit, portamHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = PORTAM_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + case 4: + // up + if (portamMaxVal + portamStep < portamHiLimit){ + portamMaxVal += portamStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(portamMaxVal, portamLoLimit, portamHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = PORTAM_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + } + } + } else if (state == PITCHB_ADJ_IDL){ + if (stateFirstRun) { + drawPitchbScreen(); + forcePix = 1; + stateFirstRun = 0; + } + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawAdjCursor(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + state = EXTRAC_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(PITCHB_THR_ADDR) != pitchbThrVal) writeSetting(PITCHB_THR_ADDR,pitchbThrVal); + if (readSetting(PITCHB_MAX_ADDR) != pitchbMaxVal) writeSetting(PITCHB_MAX_ADDR,pitchbMaxVal); + break; + case 2: + // enter + state = PITCHB_ADJ_THR; + break; + case 4: + // up + state = PORTAM_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(PITCHB_THR_ADDR) != pitchbThrVal) writeSetting(PITCHB_THR_ADDR,pitchbThrVal); + if (readSetting(PITCHB_MAX_ADDR) != pitchbMaxVal) writeSetting(PITCHB_MAX_ADDR,pitchbMaxVal); + break; + case 8: + // menu + state = MAIN_MENU; + stateFirstRun = 1; + if (readSetting(PITCHB_THR_ADDR) != pitchbThrVal) writeSetting(PITCHB_THR_ADDR,pitchbThrVal); + if (readSetting(PITCHB_MAX_ADDR) != pitchbMaxVal) writeSetting(PITCHB_MAX_ADDR,pitchbMaxVal); + break; + } + } + } else if (state == PITCHB_ADJ_THR){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos1,20,pos1,26,cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (pitchbThrVal - pitchbStep > pitchbLoLimit){ + pitchbThrVal -= pitchbStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(pitchbThrVal, pitchbLoLimit, pitchbHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = PITCHB_ADJ_MAX; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + case 4: + // up + if (pitchbThrVal + pitchbStep < pitchbHiLimit){ + pitchbThrVal += pitchbStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(pitchbThrVal, pitchbLoLimit, pitchbHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = PITCHB_ADJ_IDL; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + } + } + } else if (state == PITCHB_ADJ_MAX){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos2,50,pos2,57,cursorNow);; + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if ((pitchbMaxVal - pitchbStep) > (pitchbThrVal + minOffset)){ + pitchbMaxVal -= pitchbStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(pitchbMaxVal, pitchbLoLimit, pitchbHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = PITCHB_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + case 4: + // up + if (pitchbMaxVal + pitchbStep < pitchbHiLimit){ + pitchbMaxVal += pitchbStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(pitchbMaxVal, pitchbLoLimit, pitchbHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = PITCHB_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + } + } + + } else if (state == EXTRAC_ADJ_IDL){ + if (stateFirstRun) { + drawExtracScreen(); + forcePix = 1; + stateFirstRun = 0; + } + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawAdjCursor(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + state = CTOUCH_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(EXTRAC_THR_ADDR) != extracThrVal) writeSetting(EXTRAC_THR_ADDR,extracThrVal); + if (readSetting(EXTRAC_MAX_ADDR) != extracMaxVal) writeSetting(EXTRAC_MAX_ADDR,extracMaxVal); + break; + case 2: + // enter + state = EXTRAC_ADJ_THR; + break; + case 4: + // up + state = PITCHB_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(EXTRAC_THR_ADDR) != extracThrVal) writeSetting(EXTRAC_THR_ADDR,extracThrVal); + if (readSetting(EXTRAC_MAX_ADDR) != extracMaxVal) writeSetting(EXTRAC_MAX_ADDR,extracMaxVal); + break; + case 8: + // menu + state = MAIN_MENU; + stateFirstRun = 1; + if (readSetting(EXTRAC_THR_ADDR) != extracThrVal) writeSetting(EXTRAC_THR_ADDR,extracThrVal); + if (readSetting(EXTRAC_MAX_ADDR) != extracMaxVal) writeSetting(EXTRAC_MAX_ADDR,extracMaxVal); + break; + } + } + } else if (state == EXTRAC_ADJ_THR){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos1,20,pos1,26,cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (extracThrVal - extracStep > extracLoLimit){ + extracThrVal -= extracStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(extracThrVal, extracLoLimit, extracHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = EXTRAC_ADJ_MAX; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + case 4: + // up + if (extracThrVal + extracStep < extracHiLimit){ + extracThrVal += extracStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(extracThrVal, extracLoLimit, extracHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = EXTRAC_ADJ_IDL; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + } + } + } else if (state == EXTRAC_ADJ_MAX){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos2,50,pos2,57,cursorNow);; + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if ((extracMaxVal - extracStep) > (extracThrVal + minOffset)){ + extracMaxVal -= extracStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(extracMaxVal, extracLoLimit, extracHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = EXTRAC_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + case 4: + // up + if (extracMaxVal + extracStep < extracHiLimit){ + extracMaxVal += extracStep; + display.drawLine(pos2,50,pos2,57,BLACK); + pos2 = map(extracMaxVal, extracLoLimit, extracHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = EXTRAC_ADJ_IDL; + display.drawLine(pos2,50,pos2,57,WHITE); + display.display(); + break; + } + } + + } else if (state == CTOUCH_ADJ_IDL){ + if (stateFirstRun) { + drawCtouchScreen(); + forcePix = 1; + stateFirstRun = 0; + } + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawAdjCursor(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + state = BREATH_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(CTOUCH_THR_ADDR) != ctouchThrVal) writeSetting(CTOUCH_THR_ADDR,ctouchThrVal); + break; + case 2: + // enter + state = CTOUCH_ADJ_THR; + break; + case 4: + // up + state = EXTRAC_ADJ_IDL; + stateFirstRun = 1; + if (readSetting(CTOUCH_THR_ADDR) != ctouchThrVal) writeSetting(CTOUCH_THR_ADDR,ctouchThrVal); + break; + case 8: + // menu + state = MAIN_MENU; + stateFirstRun = 1; + if (readSetting(CTOUCH_THR_ADDR) != ctouchThrVal) writeSetting(CTOUCH_THR_ADDR,ctouchThrVal); + break; + } + } + } else if (state == CTOUCH_ADJ_THR){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + display.drawLine(pos1,20,pos1,26,cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (ctouchThrVal - ctouchStep > ctouchLoLimit){ + ctouchThrVal -= ctouchStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(ctouchThrVal, ctouchLoLimit, ctouchHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 2: + // enter + state = CTOUCH_ADJ_IDL; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + case 4: + // up + if (ctouchThrVal + ctouchStep < ctouchHiLimit){ + ctouchThrVal += ctouchStep; + display.drawLine(pos1,20,pos1,26,BLACK); + pos1 = map(ctouchThrVal, ctouchLoLimit, ctouchHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + cursorBlinkTime = millis(); + cursorNow = BLACK; + } + break; + case 8: + // menu + state = CTOUCH_ADJ_IDL; + display.drawLine(pos1,20,pos1,26,WHITE); + display.display(); + break; + } + } + + + } else if (state == SETUP_BR_MENU) { // SETUP BREATH MENU HERE <<<<<<<<<<<<<< + if (stateFirstRun) { + drawSetupBrMenuScreen(); + stateFirstRun = 0; + } + if (subBreathCC){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotBreathCC(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (breathCC > 0){ + plotBreathCC(BLACK); + breathCC--; + plotBreathCC(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } else { + plotBreathCC(BLACK); + breathCC = 8; + plotBreathCC(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotBreathCC(WHITE); + cursorNow = BLACK; + display.display(); + subBreathCC = 0; + if (readSetting(BREATH_CC_ADDR) != breathCC) { + writeSetting(BREATH_CC_ADDR,breathCC); + midiReset(); + } + break; + case 4: + // up + if (breathCC < 8){ + plotBreathCC(BLACK); + breathCC++; + plotBreathCC(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } else { + plotBreathCC(BLACK); + breathCC = 0; + plotBreathCC(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotBreathCC(WHITE); + cursorNow = BLACK; + display.display(); + subBreathCC = 0; + if (readSetting(BREATH_CC_ADDR) != breathCC) { + writeSetting(BREATH_CC_ADDR,breathCC); + midiReset(); + } + break; + } + } + } else if (subBreathAT) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotBreathAT(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotBreathAT(BLACK); + breathAT=!breathAT; + plotBreathAT(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotBreathAT(WHITE); + cursorNow = BLACK; + display.display(); + subBreathAT = 0; + if (readSetting(BREATH_AT_ADDR) != breathAT){ + writeSetting(BREATH_AT_ADDR,breathAT); + midiReset(); + } + break; + case 4: + // up + plotBreathAT(BLACK); + breathAT=!breathAT; + plotBreathAT(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotBreathAT(WHITE); + cursorNow = BLACK; + display.display(); + subBreathAT = 0; + if (readSetting(BREATH_AT_ADDR) != breathAT){ + writeSetting(BREATH_AT_ADDR,breathAT); + midiReset(); + } + break; + } + } + } else if (subVelocity) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotVelocity(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotVelocity(BLACK); + if (velocity > 0){ + velocity--; + } else velocity = 127; + plotVelocity(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotVelocity(WHITE); + cursorNow = BLACK; + display.display(); + subVelocity = 0; + if (readSetting(VELOCITY_ADDR) != velocity) writeSetting(VELOCITY_ADDR,velocity); + break; + case 4: + // up + plotVelocity(BLACK); + if (velocity < 127){ + velocity++; + } else velocity = 0; + plotVelocity(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotVelocity(WHITE); + cursorNow = BLACK; + display.display(); + subVelocity = 0; + if (readSetting(VELOCITY_ADDR) != velocity) writeSetting(VELOCITY_ADDR,velocity); + break; + } + } + + + } else if (subCurve) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotCurve(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotCurve(BLACK); + if (curve > 0){ + curve--; + } else curve = 12; + plotCurve(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotCurve(WHITE); + cursorNow = BLACK; + display.display(); + subCurve = 0; + if (readSetting(BREATHCURVE_ADDR) != curve) writeSetting(BREATHCURVE_ADDR,curve); + break; + case 4: + // up + plotCurve(BLACK); + if (curve < 12){ + curve++; + } else curve = 0; + plotCurve(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotCurve(WHITE); + cursorNow = BLACK; + display.display(); + subCurve = 0; + if (readSetting(BREATHCURVE_ADDR) != curve) writeSetting(BREATHCURVE_ADDR,curve); + break; + } + } + + } else if (subVelSmpDl) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotVelSmpDl(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotVelSmpDl(BLACK); + if (velSmpDl > 0){ + velSmpDl-=5; + } else velSmpDl = 30; + plotVelSmpDl(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotVelSmpDl(WHITE); + cursorNow = BLACK; + display.display(); + subVelSmpDl = 0; + if (readSetting(VEL_SMP_DL_ADDR) != velSmpDl) writeSetting(VEL_SMP_DL_ADDR,velSmpDl); + break; + case 4: + // up + plotVelSmpDl(BLACK); + if (velSmpDl < 30){ + velSmpDl+=5; + } else velSmpDl = 0; + plotVelSmpDl(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotVelSmpDl(WHITE); + cursorNow = BLACK; + display.display(); + subVelSmpDl = 0; + if (readSetting(VEL_SMP_DL_ADDR) != velSmpDl) writeSetting(VEL_SMP_DL_ADDR,velSmpDl); + break; + } + } + + } else if (subVelBias) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotVelBias(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotVelBias(BLACK); + if (velBias > 0){ + velBias--; + } else velBias = 9; + plotVelBias(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotVelBias(WHITE); + cursorNow = BLACK; + display.display(); + subVelBias = 0; + if (readSetting(VEL_BIAS_ADDR) != velBias) writeSetting(VEL_BIAS_ADDR,velBias); + break; + case 4: + // up + plotVelBias(BLACK); + if (velBias < 9){ + velBias++; + } else velBias = 0; + plotVelBias(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotVelBias(WHITE); + cursorNow = BLACK; + display.display(); + subVelBias = 0; + if (readSetting(VEL_BIAS_ADDR) != velBias) writeSetting(VEL_BIAS_ADDR,velBias); + break; + } + } + + } else { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawMenuCursor(setupBrMenuCursor, cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (setupBrMenuCursor < 6){ + drawMenuCursor(setupBrMenuCursor, BLACK); + setupBrMenuCursor++; + drawMenuCursor(setupBrMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 2: + // enter + selectSetupBrMenu(); + break; + case 4: + // up + if (setupBrMenuCursor > 1){ + drawMenuCursor(setupBrMenuCursor, BLACK); + setupBrMenuCursor--; + drawMenuCursor(setupBrMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 8: + // menu + state = MAIN_MENU; + stateFirstRun = 1; + break; + } + } + } + + + } else if (state == SETUP_CT_MENU) { // SETUP CONTROLLERS MENU HERE <<<<<<<<<<<<< + if (stateFirstRun) { + drawSetupCtMenuScreen(); + stateFirstRun = 0; + } + if (subPort){ + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotPort(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotPort(BLACK); + if (portamento > 0){ + portamento--; + } else portamento = 2; + plotPort(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotPort(WHITE); + cursorNow = BLACK; + display.display(); + subPort = 0; + if (readSetting(PORTAM_ADDR) != portamento) writeSetting(PORTAM_ADDR,portamento); + break; + case 4: + // up + plotPort(BLACK); + if (portamento < 2){ + portamento++; + } else portamento = 0; + plotPort(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotPort(WHITE); + cursorNow = BLACK; + display.display(); + subPort = 0; + if (readSetting(PORTAM_ADDR) != portamento) writeSetting(PORTAM_ADDR,portamento); + break; + } + } + } else if (subPB) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotPB(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (PBdepth > 0){ + plotPB(BLACK); + PBdepth--; + plotPB(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotPB(WHITE); + cursorNow = BLACK; + display.display(); + subPB = 0; + if (readSetting(PB_ADDR) != PBdepth) writeSetting(PB_ADDR,PBdepth); + break; + case 4: + // up + if (PBdepth < 12){ + plotPB(BLACK); + PBdepth++; + plotPB(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotPB(WHITE); + cursorNow = BLACK; + display.display(); + subPB = 0; + if (readSetting(PB_ADDR) != PBdepth) writeSetting(PB_ADDR,PBdepth); + break; + } + } + } else if (subExtra) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotExtra(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + plotExtra(BLACK); + if (extraCT > 0){ + extraCT--; + } else extraCT = 4; + plotExtra(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 2: + // enter + plotExtra(WHITE); + cursorNow = BLACK; + display.display(); + subExtra = 0; + if (readSetting(EXTRA_ADDR) != extraCT) writeSetting(EXTRA_ADDR,extraCT); + break; + case 4: + // up + plotExtra(BLACK); + if (extraCT < 4){ + extraCT++; + } else extraCT = 0; + plotExtra(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + break; + case 8: + // menu + plotExtra(WHITE); + cursorNow = BLACK; + display.display(); + subExtra = 0; + if (readSetting(EXTRA_ADDR) != extraCT) writeSetting(EXTRA_ADDR,extraCT); + break; + } + } + } else if (subVibrato) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotVibrato(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (vibrato > 0){ + plotVibrato(BLACK); + vibrato--; + plotVibrato(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotVibrato(WHITE); + cursorNow = BLACK; + display.display(); + subVibrato = 0; + if (readSetting(VIBRATO_ADDR) != vibrato) writeSetting(VIBRATO_ADDR,vibrato); + break; + case 4: + // up + if (vibrato < 9){ + plotVibrato(BLACK); + vibrato++; + plotVibrato(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotVibrato(WHITE); + cursorNow = BLACK; + display.display(); + subVibrato = 0; + if (readSetting(VIBRATO_ADDR) != vibrato) writeSetting(VIBRATO_ADDR,vibrato); + break; + } + } + } else if (subDeglitch) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotDeglitch(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (deglitch > 0){ + plotDeglitch(BLACK); + deglitch-=5; + plotDeglitch(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotDeglitch(WHITE); + cursorNow = BLACK; + display.display(); + subDeglitch = 0; + if (readSetting(DEGLITCH_ADDR) != deglitch) writeSetting(DEGLITCH_ADDR,deglitch); + break; + case 4: + // up + if (deglitch < 70){ + plotDeglitch(BLACK); + deglitch+=5; + plotDeglitch(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotDeglitch(WHITE); + cursorNow = BLACK; + display.display(); + subDeglitch = 0; + if (readSetting(DEGLITCH_ADDR) != deglitch) writeSetting(DEGLITCH_ADDR,deglitch); + break; + } + } + } else if (subPinky) { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + plotPinkyKey(cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (pinkySetting > 0){ + plotPinkyKey(BLACK); + pinkySetting-=1; + plotPinkyKey(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 2: + // enter + plotPinkyKey(WHITE); + cursorNow = BLACK; + display.display(); + subPinky = 0; + if (readSetting(PINKY_KEY_ADDR) != pinkySetting) writeSetting(PINKY_KEY_ADDR,pinkySetting); + break; + case 4: + // up + if (pinkySetting < 24){ + plotPinkyKey(BLACK); + pinkySetting+=1; + plotPinkyKey(WHITE); + cursorNow = BLACK; + display.display(); + cursorBlinkTime = millis(); + } + break; + case 8: + // menu + plotPinkyKey(WHITE); + cursorNow = BLACK; + display.display(); + subPinky = 0; + if (readSetting(PINKY_KEY_ADDR) != pinkySetting) writeSetting(PINKY_KEY_ADDR,pinkySetting); + break; + } + } + } else { + if ((millis() - cursorBlinkTime) > cursorBlinkInterval) { + if (cursorNow == WHITE) cursorNow = BLACK; else cursorNow = WHITE; + drawMenuCursor(setupCtMenuCursor, cursorNow); + display.display(); + cursorBlinkTime = millis(); + } + if (buttonPressedAndNotUsed){ + buttonPressedAndNotUsed = 0; + switch (deumButtonState){ + case 1: + // down + if (setupCtMenuCursor < 6){ + drawMenuCursor(setupCtMenuCursor, BLACK); + setupCtMenuCursor++; + drawMenuCursor(setupCtMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 2: + // enter + selectSetupCtMenu(); + break; + case 4: + // up + if (setupCtMenuCursor > 1){ + drawMenuCursor(setupCtMenuCursor, BLACK); + setupCtMenuCursor--; + drawMenuCursor(setupCtMenuCursor, WHITE); + cursorNow = BLACK; + clearSub(); + display.display(); + } + break; + case 8: + // menu + state = MAIN_MENU; + stateFirstRun = 1; + break; + } + } + } + } + +} + +void selectMainMenu(){ + switch (mainMenuCursor){ + case 1: + subTranspose = 1; + drawMenuCursor(mainMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubTranspose(); + break; + case 2: + subOctave = 1; + drawMenuCursor(mainMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubOctave(); + break; + case 3: + subMIDI = 1; + drawMenuCursor(mainMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubMIDI(); + break; + case 4: + state = BREATH_ADJ_IDL; + stateFirstRun = 1; + break; + case 5: + state = SETUP_BR_MENU; + stateFirstRun = 1; + break; + case 6: + state = SETUP_CT_MENU; + stateFirstRun = 1; + break; + } +} + +void selectRotatorMenu(){ + switch (rotatorMenuCursor){ + case 1: + subParallel = 1; + drawMenuCursor(rotatorMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubRotator(); + break; + case 2: + subRotator = 1; + drawMenuCursor(rotatorMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubRotator(); + break; + case 3: + subRotator = 2; + drawMenuCursor(rotatorMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubRotator(); + break; + case 4: + subRotator = 3; + drawMenuCursor(rotatorMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubRotator(); + break; + case 5: + subRotator = 4; + drawMenuCursor(rotatorMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubRotator(); + break; + case 6: + subPriority = 1; + drawMenuCursor(rotatorMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubPriority(); + break; + } +} + +void selectSynthMenu(){ + switch (synthMenuCursor){ + case 1: + subWave = 1; + drawMenuCursor(synthMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubWave(); + break; + case 2: + subCutoff = 1; + drawMenuCursor(synthMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubCutoff(); + break; + case 3: + subReso = 1; + drawMenuCursor(synthMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubReso(); + break; + case 4: + subVolume = 1; + drawMenuCursor(synthMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubVol(); + break; + case 5: + subFilter = 1; + drawMenuCursor(synthMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubFilter(); + break; + } +} + +void selectSetupBrMenu(){ + switch (setupBrMenuCursor){ + case 1: + subBreathCC = 1; + drawMenuCursor(setupBrMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubBreathCC(); + break; + case 2: + subBreathAT = 1; + drawMenuCursor(setupBrMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubBreathAT(); + break; + case 3: + subVelocity = 1; + drawMenuCursor(setupBrMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubVelocity(); + break; + case 4: + subCurve = 1; + drawMenuCursor(setupBrMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubCurve(); + break; + case 5: + subVelSmpDl = 1; + drawMenuCursor(setupBrMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubVelSmpDl(); + break; + case 6: + subVelBias = 1; + drawMenuCursor(setupBrMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubVelBias(); + break; + } +} + +void selectSetupCtMenu(){ + switch (setupCtMenuCursor){ + case 1: + subPort = 1; + drawMenuCursor(setupCtMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubPort(); + break; + case 2: + subPB = 1; + drawMenuCursor(setupCtMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubPB(); + break; + case 3: + subExtra = 1; + drawMenuCursor(setupCtMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubExtra(); + break; + case 4: + subVibrato = 1; + drawMenuCursor(setupCtMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubVibrato(); + break; + case 5: + subDeglitch = 1; + drawMenuCursor(setupCtMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubDeglitch(); + break; + case 6: + subPinky = 1; + drawMenuCursor(setupCtMenuCursor, WHITE); + display.display(); + cursorBlinkTime = millis(); + drawSubPinkyKey(); + } +} +void drawBreathScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(25,2); + display.println("BREATH"); + //display.drawLine(0,10,127,10,WHITE); + display.setCursor(0,20); + display.println("THR"); + display.drawLine(25,17,120,17,WHITE); + display.drawLine(25,18,25,19,WHITE); + display.drawLine(120,18,120,19,WHITE); + display.drawLine(25,29,120,29,WHITE); + display.drawLine(25,27,25,28,WHITE); + display.drawLine(120,27,120,28,WHITE); + display.setCursor(0,35); + display.println("SNS"); + //display.drawLine(25,38,120,38,WHITE); + display.drawLine(25,36,25,40,WHITE); + display.drawLine(120,36,120,40,WHITE); + display.setCursor(0,50); + display.println("MAX"); + display.drawLine(25,47,120,47,WHITE); + display.drawLine(25,48,25,49,WHITE); + display.drawLine(120,48,120,49,WHITE); + display.drawLine(25,60,120,60,WHITE); + display.drawLine(25,58,25,59,WHITE); + display.drawLine(120,58,120,59,WHITE); + + //display.drawLine(38,20,38,26,WHITE); // indikation thr + pos1 = map(breathThrVal, breathLoLimit, breathHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + cursorNow = WHITE; + //display.drawLine(115,50,115,57,WHITE); // indikation max + pos2 = map(breathMaxVal, breathLoLimit, breathHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + //display.drawPixel(34, 38, WHITE); + drawAdjCursor(WHITE); + display.display(); +} + +void drawPortamScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(25,2); + display.println("PORTAMENTO"); + //display.drawLine(0,10,127,10,WHITE); + display.setCursor(0,20); + display.println("THR"); + display.drawLine(25,17,120,17,WHITE); + display.drawLine(25,18,25,19,WHITE); + display.drawLine(120,18,120,19,WHITE); + display.drawLine(25,29,120,29,WHITE); + display.drawLine(25,27,25,28,WHITE); + display.drawLine(120,27,120,28,WHITE); + display.setCursor(0,35); + display.println("SNS"); + //display.drawLine(25,38,120,38,WHITE); + display.drawLine(25,36,25,40,WHITE); + display.drawLine(120,36,120,40,WHITE); + display.setCursor(0,50); + display.println("MAX"); + display.drawLine(25,47,120,47,WHITE); + display.drawLine(25,48,25,49,WHITE); + display.drawLine(120,48,120,49,WHITE); + display.drawLine(25,60,120,60,WHITE); + display.drawLine(25,58,25,59,WHITE); + display.drawLine(120,58,120,59,WHITE); + + //display.drawLine(38,20,38,26,WHITE); // indikation thr + pos1 = map(portamThrVal, portamLoLimit, portamHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + cursorNow = WHITE; + //display.drawLine(115,50,115,57,WHITE); // indikation max + pos2 = map(portamMaxVal, portamLoLimit, portamHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + //display.drawPixel(34, 38, WHITE); + drawAdjCursor(WHITE); + display.display(); +} + +void drawPitchbScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(25,2); + display.println("PITCH BEND"); + //display.drawLine(0,10,127,10,WHITE); + display.setCursor(0,20); + display.println("THR"); + display.drawLine(25,17,120,17,WHITE); + display.drawLine(25,18,25,19,WHITE); + display.drawLine(120,18,120,19,WHITE); + display.drawLine(25,29,120,29,WHITE); + display.drawLine(25,27,25,28,WHITE); + display.drawLine(120,27,120,28,WHITE); + display.setCursor(0,35); + display.println("SNS"); + //display.drawLine(25,38,120,38,WHITE); + display.drawLine(25,36,25,40,WHITE); + display.drawLine(120,36,120,40,WHITE); + display.setCursor(0,50); + display.println("MAX"); + display.drawLine(25,47,120,47,WHITE); + display.drawLine(25,48,25,49,WHITE); + display.drawLine(120,48,120,49,WHITE); + display.drawLine(25,60,120,60,WHITE); + display.drawLine(25,58,25,59,WHITE); + display.drawLine(120,58,120,59,WHITE); + + //display.drawLine(38,20,38,26,WHITE); // indikation thr + pos1 = map(pitchbThrVal, pitchbLoLimit, pitchbHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + cursorNow = WHITE; + //display.drawLine(115,50,115,57,WHITE); // indikation max + pos2 = map(pitchbMaxVal, pitchbLoLimit, pitchbHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + //display.drawPixel(34, 38, WHITE); + drawAdjCursor(WHITE); + display.display(); +} + +void drawExtracScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(25,2); + display.println("EXTRA CONTROLLER"); + //display.drawLine(0,10,127,10,WHITE); + display.setCursor(0,20); + display.println("THR"); + display.drawLine(25,17,120,17,WHITE); + display.drawLine(25,18,25,19,WHITE); + display.drawLine(120,18,120,19,WHITE); + display.drawLine(25,29,120,29,WHITE); + display.drawLine(25,27,25,28,WHITE); + display.drawLine(120,27,120,28,WHITE); + display.setCursor(0,35); + display.println("SNS"); + //display.drawLine(25,38,120,38,WHITE); + display.drawLine(25,36,25,40,WHITE); + display.drawLine(120,36,120,40,WHITE); + display.setCursor(0,50); + display.println("MAX"); + display.drawLine(25,47,120,47,WHITE); + display.drawLine(25,48,25,49,WHITE); + display.drawLine(120,48,120,49,WHITE); + display.drawLine(25,60,120,60,WHITE); + display.drawLine(25,58,25,59,WHITE); + display.drawLine(120,58,120,59,WHITE); + + //display.drawLine(38,20,38,26,WHITE); // indikation thr + pos1 = map(extracThrVal, extracLoLimit, extracHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + cursorNow = WHITE; + //display.drawLine(115,50,115,57,WHITE); // indikation max + pos2 = map(extracMaxVal, extracLoLimit, extracHiLimit, 27, 119); + display.drawLine(pos2,50,pos2,57,WHITE); + //display.drawPixel(34, 38, WHITE); + drawAdjCursor(WHITE); + display.display(); +} + + +void drawCtouchScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(25,2); + display.println("TOUCH SENSE"); + //display.drawLine(0,10,127,10,WHITE); + display.setCursor(0,20); + display.println("THR"); + display.drawLine(25,17,120,17,WHITE); + display.drawLine(25,18,25,19,WHITE); + display.drawLine(120,18,120,19,WHITE); + display.drawLine(25,29,120,29,WHITE); + display.drawLine(25,27,25,28,WHITE); + display.drawLine(120,27,120,28,WHITE); + display.setCursor(0,35); + display.println("SNS"); + //display.drawLine(25,38,120,38,WHITE); + display.drawLine(25,36,25,40,WHITE); + display.drawLine(120,36,120,40,WHITE); + + //display.drawLine(38,20,38,26,WHITE); // indikation thr + pos1 = map(ctouchThrVal, ctouchLoLimit, ctouchHiLimit, 27, 119); + display.drawLine(pos1,20,pos1,26,WHITE); + cursorNow = WHITE; + + //display.drawPixel(34, 38, WHITE); + drawAdjCursor(WHITE); + display.display(); +} + +void drawMenuCursor(byte itemNo, byte color){ + byte xmid = 6 + 9 * itemNo; + display.drawTriangle(57,xmid,61,xmid+2,61,xmid-2,color); +} + +void drawAdjCursor(byte color){ + display.drawTriangle(16,4,20,4,18,1,color); + display.drawTriangle(16,6,20,6,18,9,color); +} + +void drawMenuScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(0,0); + display.print("MENU "); + int vMeterReading = analogRead(vMeterPin); + if (vMeterReading > 3000) display.print("USB "); else display.print("BAT "); + if (vMeterReading < 2294) display.print("LOW"); else { + display.print(map(vMeterReading,0,3030,0,50)*0.1,1); + display.print("V"); + } + display.drawLine(0,9,127,9,WHITE); + display.setCursor(0,12); + display.println("TRANSPOSE"); + display.setCursor(0,21); + display.println("OCTAVE"); + display.setCursor(0,30); + display.println("MIDI CH"); + display.setCursor(0,39); + display.println("ADJUST"); + display.setCursor(0,48); + display.println("SETUP BR"); + display.setCursor(0,57); + display.println("SETUP CTL"); + drawMenuCursor(mainMenuCursor, WHITE); + display.display(); +} + +void drawRotatorMenuScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(0,0); + display.print("ROTATOR SETUP"); + display.drawLine(0,9,127,9,WHITE); + display.setCursor(0,12); + display.println("INTERVAL"); + display.setCursor(0,21); + display.println("ROTATE 1"); + display.setCursor(0,30); + display.println("ROTATE 2"); + display.setCursor(0,39); + display.println("ROTATE 3"); + display.setCursor(0,48); + display.println("ROTATE 4"); + display.setCursor(0,57); + display.println("PRIORITY"); + drawMenuCursor(rotatorMenuCursor, WHITE); + display.display(); +} + +void drawSynthMenuScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(0,0); + display.print("SYNTH SETUP"); + display.drawLine(0,9,127,9,WHITE); + display.setCursor(0,12); + display.println("WAVE"); + display.setCursor(0,21); + display.println("CUTOFF"); + display.setCursor(0,30); + display.println("RESO"); + display.setCursor(0,39); + display.println("VOLUME"); + display.setCursor(0,48); + display.println("FILTER"); + display.setCursor(0,57); + display.println(""); + drawMenuCursor(synthMenuCursor, WHITE); + display.display(); +} + +void drawPatchView(){ + display.clearDisplay(); + if (FPD){ + drawTrills(); + } + if (FPD < 2){ + display.setTextColor(WHITE); + display.setTextSize(6); + if (patch < 10){ + // 1-9 + display.setCursor(48,10); + } else if (patch < 100){ + // 10-99 + display.setCursor(31,10); + } else { + // 99-128 + display.setCursor(10,10); + } + display.println(patch); + } else if (FPD == 2){ + display.setTextColor(WHITE); + display.setTextSize(6); + display.setCursor(10,10); + display.println("SET"); + } else { + display.setTextColor(WHITE); + display.setTextSize(6); + display.setCursor(10,10); + display.println("CLR"); + } + display.display(); +} + +void drawTrills(){ + if (K5) display.fillRect(0,0,5,5,WHITE); else display.drawRect(0,0,5,5,WHITE); + if (K6) display.fillRect(10,0,5,5,WHITE); else display.drawRect(10,0,5,5,WHITE); + if (K7) display.fillRect(20,0,5,5,WHITE); else display.drawRect(20,0,5,5,WHITE); +} + +void clearSub(){ + display.fillRect(63,11,64,52,BLACK); +} + +void drawSubTranspose(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("TRANSPOSE"); + plotTranspose(WHITE); + display.display(); +} + +void plotTranspose(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(80,33); + if ((transpose-12) > -1){ + display.println("+"); + display.setCursor(93,33); + display.println(transpose-12); + } else { + display.println("-"); + display.setCursor(93,33); + display.println(abs(transpose-12)); + } +} +void drawSubRotator(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("SEMITONES"); + //plotRotator(WHITE,value); + forceRedraw = 1; + display.display(); +} + +void plotRotator(int color,int value){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(80,33); + if ((value) > -1){ + display.println("+"); + display.setCursor(93,33); + display.println(value); + } else { + display.println("-"); + display.setCursor(93,33); + display.println(abs(value)); + } +} + +void drawSubPriority(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("MONO PRIO"); + plotPriority(WHITE); + display.display(); +} + +void plotPriority(int color){ + display.setTextColor(color); + display.setTextSize(2); + + if (priority){ + display.setCursor(83,33); + //display.setCursor(79,33); + display.println("LO"); + } else { + display.setCursor(83,33); + //display.setCursor(79,33); + display.println("HI"); + } +} + + +void drawSubOctave(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(77,15); + display.println("OCTAVE"); + plotOctave(WHITE); + display.display(); +} + +void plotOctave(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(80,33); + if ((octave-3) > -1){ + display.println("+"); + display.setCursor(93,33); + display.println(octave-3); + } else { + display.println("-"); + display.setCursor(93,33); + display.println(abs(octave-3)); + } +} + +void drawSubMIDI(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("MIDI CHNL"); + plotMIDI(WHITE); + display.display(); +} + +void plotMIDI(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(90,33); + display.println(MIDIchannel); +} + +void drawSubBreathCC(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("BREATH CC"); + plotBreathCC(WHITE); + display.display(); +} + +void plotBreathCC(int color){ + display.setTextColor(color); + display.setTextSize(2); + if (breathCC){ + switch (breathCC){ + case 1: + display.setCursor(83,33); + display.println("MW"); + break; + case 2: + display.setCursor(83,33); + display.println("BR"); + break; + case 3: + display.setCursor(83,33); + display.println("VL"); + break; + case 4: + display.setCursor(83,33); + display.println("EX"); + break; + case 5: + display.setCursor(79,33); + display.println("MW+"); + break; + case 6: + display.setCursor(79,33); + display.println("BR+"); + break; + case 7: + display.setCursor(79,33); + display.println("VL+"); + break; + case 8: + display.setCursor(79,33); + display.println("EX+"); + break; + } + } else { + display.setCursor(79,33); + display.println("OFF"); + } +} + +void drawSubBreathAT(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("BREATH AT"); + plotBreathAT(WHITE); + display.display(); +} + +void plotBreathAT(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(79,33); + if (breathAT){ + display.println("ON"); + } else { + display.println("OFF"); + } +} + +void drawSubVelocity(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(71,15); + display.println("VELOCITY"); + plotVelocity(WHITE); + display.display(); +} + +void plotVelocity(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(79,33); + if (velocity){ + display.println(velocity); + } else { + display.println("DYN"); + } +} + +void drawSubWave(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(80,15); + display.println("SHAPE"); + plotWave(WHITE); + display.display(); +} + +void plotWave(int color){ + display.setTextColor(color); + display.setTextSize(2); + switch (wave){ + case 0: + display.setCursor(79,33); + display.println("SAW"); + break; + case 1: + display.setCursor(79,33); + display.println("SQR"); + break; + case 2: + display.setCursor(79,33); + display.println("TRI"); + break; + } +} + +void drawSubCutoff(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(80,15); + display.println("LEVEL"); + plotCutoff(WHITE); + display.display(); +} + +void plotCutoff(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(90,33); + display.println(cutoff); +} + +void drawSubReso(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(80,15); + display.println("LEVEL"); + plotReso(WHITE); + display.display(); +} + +void plotReso(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(90,33); + display.println(reso); +} + +void drawSubVol(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(80,15); + display.println("LEVEL"); + plotVol(WHITE); + display.display(); +} + +void plotVol(int color){ + display.setTextColor(color); + display.setTextSize(2); + if (vol){ + display.setCursor(90,33); + display.println(vol); + } else { + display.setCursor(79,33); + display.println("OFF"); + } +} + +void drawSubFilter(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(75,15); + display.println("SELECT"); + plotFilter(WHITE); + display.display(); +} + +void plotFilter(int color){ + display.setTextColor(color); + display.setTextSize(2); + if (!filter){ + display.setCursor(79,33); + display.println("INT"); + } else { + display.setCursor(79,33); + display.println("EXT"); + } +} + +void drawSubCurve(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(80,15); + display.println("CURVE"); + plotCurve(WHITE); + display.display(); +} + +void plotCurve(int color){ + display.setTextColor(color); + display.setTextSize(2); + switch (curve){ + case 0: + display.setCursor(83,33); + display.println("-4"); + break; + case 1: + display.setCursor(83,33); + display.println("-3"); + break; + case 2: + display.setCursor(83,33); + display.println("-2"); + break; + case 3: + display.setCursor(83,33); + display.println("-1"); + break; + case 4: + display.setCursor(79,33); + display.println("LIN"); + break; + case 5: + display.setCursor(83,33); + display.println("+1"); + break; + case 6: + display.setCursor(83,33); + display.println("+2"); + break; + case 7: + display.setCursor(83,33); + display.println("+3"); + break; + case 8: + display.setCursor(83,33); + display.println("+4"); + break; + case 9: + display.setCursor(83,33); + display.println("S1"); + break; + case 10: + display.setCursor(83,33); + display.println("S2"); + break; + case 11: + display.setCursor(83,33); + display.println("Z1"); + break; + case 12: + display.setCursor(83,33); + display.println("Z2"); + break; + } +} + + +void drawSubPort(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(71,15); + display.println("PORT/GLD"); + plotPort(WHITE); + display.display(); +} + +void plotPort(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(79,33); + if (portamento == 1){ + display.println("ON"); + } else if (portamento == 2){ + display.println("SW"); + } else { + display.println("OFF"); + } +} + +void drawSubPB(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("PITCHBEND"); + plotPB(WHITE); + display.display(); +} + +void plotPB(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(76,33); + if (PBdepth){ + display.println("1/"); + display.setCursor(101,33); + display.println(PBdepth); + } else { + display.println("OFF"); + } +} + +void drawSubExtra(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("EXTRA CTR"); + plotExtra(WHITE); + display.display(); +} + +void plotExtra(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(79,33); + switch (extraCT){ + case 0: + display.setCursor(79,33); + display.println("OFF"); + break; + case 1: + display.setCursor(83,33); + display.println("MW"); + break; + case 2: + display.setCursor(83,33); + display.println("FP"); + break; + case 3: + display.setCursor(83,33); + display.println("FC"); + break; + case 4: + display.setCursor(83,33); + display.println("SP"); + break; + } +} + +void drawSubVibrato(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(74,15); + display.println("VIBRATO"); + plotVibrato(WHITE); + display.display(); +} + +void plotVibrato(int color){ + display.setTextColor(color); + display.setTextSize(2); + if (vibrato){ + display.setCursor(90,33); + display.println(vibrato); + } else { + display.setCursor(79,33); + display.println("OFF"); + } +} + +void drawSubDeglitch(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(71,15); + display.println("DEGLITCH"); + plotDeglitch(WHITE); + display.display(); +} + +void plotDeglitch(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(79,33); + if (deglitch){ + display.println(deglitch); + display.setCursor(105,40); + display.setTextSize(1); + display.println("ms"); + } else { + display.println("OFF"); + } +} +void drawSubPinkyKey(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(68,15); + display.println("PINKY KEY"); + plotPinkyKey(WHITE); + display.display(); +} + +void plotPinkyKey(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(79,33); + if (pinkySetting < 12){ + display.println(pinkySetting - 12); + } else if (pinkySetting == PBD) { + display.println("PBD"); + } else { + display.print("+"); + display.println(pinkySetting - 12); + } +} +void drawSubVelSmpDl(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(69,15); + display.println("VEL DELAY"); + plotVelSmpDl(WHITE); + display.display(); +} + +void plotVelSmpDl(int color){ + display.setTextColor(color); + display.setTextSize(2); + display.setCursor(79,33); + if (velSmpDl){ + display.println(velSmpDl); + display.setCursor(105,40); + display.setTextSize(1); + display.println("ms"); + } else { + display.println("OFF"); + } +} + +void drawSubVelBias(){ + display.fillRect(63,11,64,52,BLACK); + display.drawRect(63,11,64,52,WHITE); + display.setTextColor(WHITE); + display.setTextSize(1); + display.setCursor(72,15); + display.println("VEL BIAS"); + plotVelBias(WHITE); + display.display(); +} + +void plotVelBias(int color){ + display.setTextColor(color); + display.setTextSize(2); + if (velBias){ + display.setCursor(90,33); + display.println(velBias); + } else { + display.setCursor(79,33); + display.println("OFF"); + } +} + +void drawSetupBrMenuScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(0,0); + display.println("SETUP BREATH"); + display.drawLine(0,9,127,9,WHITE); + display.setCursor(0,12); + display.println("BREATH CC"); + display.setCursor(0,21); + display.println("BREATH AT"); + display.setCursor(0,30); + display.println("VELOCITY"); + display.setCursor(0,39); + display.println("CURVE"); + display.setCursor(0,48); + display.println("VEL DELAY"); + display.setCursor(0,57); + display.println("VEL BIAS"); + + display.display(); +} + +void drawSetupCtMenuScreen(){ + // Clear the buffer. + display.clearDisplay(); + + display.setTextSize(1); + display.setTextColor(WHITE); + display.setCursor(0,0); + display.println("SETUP CTRLS"); + display.drawLine(0,9,127,9,WHITE); + display.setCursor(0,12); + display.println("PORT/GLD"); + display.setCursor(0,21); + display.println("PITCHBEND"); + display.setCursor(0,30); + display.println("EXTRA CTR"); + display.setCursor(0,39); + display.println("VIBRATO"); + display.setCursor(0,48); + display.println("DEGLITCH"); + display.setCursor(0,57); + display.println("PINKY KEY"); + + display.display(); +} + +void drawSensorPixels(){ + int pos,oldpos; + int redraw=0; + if ((state == BREATH_ADJ_IDL) || (state == BREATH_ADJ_THR) || (state == BREATH_ADJ_MAX)){ + pos = map(constrain(pressureSensor, breathLoLimit, breathHiLimit), breathLoLimit, breathHiLimit, 28, 118); + oldpos = map(constrain(lastPressure, breathLoLimit, breathHiLimit), breathLoLimit, breathHiLimit, 28, 118); + if (pos!=oldpos){ + display.drawPixel(oldpos, 38, BLACK); + display.drawPixel(pos, 38, WHITE); + display.display(); + } else if (forcePix) { + display.drawPixel(pos, 38, WHITE); + display.display(); + } + lastPressure=pressureSensor; + } + if ((state == PORTAM_ADJ_IDL) || (state == PORTAM_ADJ_THR) || (state == PORTAM_ADJ_MAX)){ + pos = map(constrain(biteSensor,portamLoLimit,portamHiLimit), portamLoLimit, portamHiLimit, 28, 118); + oldpos = map(constrain(lastBite,portamLoLimit,portamHiLimit), portamLoLimit, portamHiLimit, 28, 118); + if (pos!=oldpos){ + display.drawPixel(oldpos, 38, BLACK); + display.drawPixel(pos, 38, WHITE); + display.display(); + } else if (forcePix) { + display.drawPixel(pos, 38, WHITE); + display.display(); + } + lastBite=biteSensor; + } + if ((state == PITCHB_ADJ_IDL) || (state == PITCHB_ADJ_THR) || (state == PITCHB_ADJ_MAX)){ + pos = map(constrain(pbUp, pitchbLoLimit, pitchbHiLimit), pitchbLoLimit, pitchbHiLimit, 28, 118); + oldpos = map(constrain(lastPbUp, pitchbLoLimit, pitchbHiLimit), pitchbLoLimit, pitchbHiLimit, 28, 118); + if (pos!=oldpos){ + display.drawPixel(oldpos, 38, BLACK); + display.drawPixel(pos, 38, WHITE); + redraw=1; + } else if (forcePix) { + display.drawPixel(pos, 38, WHITE); + redraw=1; + } + pos = map(constrain(pbDn, pitchbLoLimit, pitchbHiLimit), pitchbLoLimit, pitchbHiLimit, 28, 118); + oldpos = map(constrain(lastPbDn, pitchbLoLimit, pitchbHiLimit), pitchbLoLimit, pitchbHiLimit, 28, 118); + if (pos!=oldpos){ + display.drawPixel(oldpos, 38, BLACK); + display.drawPixel(pos, 38, WHITE); + redraw=1; + } else if (forcePix) { + display.drawPixel(pos, 38, WHITE); + redraw=1; + } + if (redraw){ + display.display(); + redraw=0; + } + lastPbUp=pbUp; + lastPbDn=pbDn; + } + if ((state == EXTRAC_ADJ_IDL) || (state == EXTRAC_ADJ_THR) || (state == EXTRAC_ADJ_MAX)){ + pos = map(constrain(exSensor, extracLoLimit, extracHiLimit), extracLoLimit, extracHiLimit, 28, 118); + oldpos = map(constrain(lastEx, extracLoLimit, extracHiLimit), extracLoLimit, extracHiLimit, 28, 118); + if (pos!=oldpos){ + display.drawPixel(oldpos, 38, BLACK); + display.drawPixel(pos, 38, WHITE); + display.display(); + } else if (forcePix) { + display.drawPixel(pos, 38, WHITE); + display.display(); + } + lastEx=exSensor; + } + if ((state == CTOUCH_ADJ_IDL) || (state == CTOUCH_ADJ_THR)){ + display.drawLine(28,38,118,38,BLACK); + for (byte i=0; i<12; i++){ + pos = map(constrain(touchSensor.filteredData(i), ctouchLoLimit, ctouchHiLimit), ctouchLoLimit, ctouchHiLimit, 28, 118); + display.drawPixel(pos, 38, WHITE); + } + display.display(); + } + forcePix = 0; +} + +void writeSetting(byte address, unsigned short value){ + union { + byte v[2]; + unsigned short val; + } data; + data.val = value; + EEPROM.write(address, data.v[0]); + EEPROM.write(address+1, data.v[1]); +} + +unsigned short readSetting(byte address){ + union { + byte v[2]; + unsigned short val; + } data; + data.v[0] = EEPROM.read(address); + data.v[1] = EEPROM.read(address+1); + return data.val; +} + +