Remove trailing whitespace

This commit is contained in:
John Stäck 2019-10-16 15:07:10 +02:00
parent cd91e6eece
commit 88b38b3f46

View file

@ -374,7 +374,7 @@ void loop() {
}
breathFilter.input(analogRead(breathSensorPin));
pressureSensor = constrain((int) breathFilter.output(), 0, 4095); // Get the filtered pressure sensor reading from analog pin A0, input from sensor MP3V5004GP
pressureSensor = constrain((int) breathFilter.output(), 0, 4095); // Get the filtered pressure sensor reading from analog pin A0, input from sensor MP3V5004GP
readSwitches();
if (mainState == NOTE_OFF) {
if (activeMIDIchannel != MIDIchannel) {
@ -503,7 +503,7 @@ void loop() {
if (analogRead(breathSensorPin) > (breathCalZero - 800)) programonce = false;
specialKey = (touchRead(specialKeyPin) > touch_Thr); //S2 on pcb
if (specialKeyEnable) {
if (specialKeyEnable) {
if (lastSpecialKey != specialKey) {
if (specialKey) {
// special key just pressed, check other keys
@ -563,7 +563,7 @@ void loop() {
else midiSendAfterTouch(levelVal);
}
} else if (lastPinkyKey){
writeSetting(LEVEL_VAL_ADDR,levelVal);
writeSetting(LEVEL_VAL_ADDR,levelVal);
}
lastPinkyKey = pinkyKey;
}
@ -793,7 +793,7 @@ void loop() {
dacModeCopy = dacMode;
brZero = breathThrVal;
interrupts();
midiDiscardInput();
//do menu stuff
@ -919,8 +919,8 @@ void pitch_bend() {
if (vibControl){ //bite vibrato
if (biteJumper){ //PBITE (if pulled low with jumper, use pressure sensor instead of capacitive bite sensor)
vibReadBite = analogRead(bitePressurePin); // alternative kind bite sensor (air pressure tube and sensor) PBITE
} else {
vibReadBite = touchRead(bitePin); // get sensor data, do some smoothing - SENSOR PIN 17 - PCB PINS LABELED "BITE" (GND left, sensor pin right)
} else {
vibReadBite = touchRead(bitePin); // get sensor data, do some smoothing - SENSOR PIN 17 - PCB PINS LABELED "BITE" (GND left, sensor pin right)
}
if (vibReadBite < vibThrBite) {
if (UPWD == vibDirection) {
@ -939,7 +939,7 @@ void pitch_bend() {
}
}
if (vibControl != 1) { //lever vibrato
vibRead = touchRead(vibratoPin); // SENSOR PIN 15 - built in var cap
vibRead = touchRead(vibratoPin); // SENSOR PIN 15 - built in var cap
if (vibRead < vibThr) {
if (UPWD == vibDirection) {
vibSignal = vibSignal * 0.5 + 0.5 * map(constrain(vibRead, (vibZero - vibMax), vibThr), vibThr, (vibZero - vibMax), 0, calculatedPBdepth * vibDepth[vibrato]);
@ -1073,7 +1073,7 @@ void extraController() {
}
} else if (pinkySetting == ECSW){
if (pinkyKey){
//send extra controller CC2 only
//send extra controller CC2 only
CC2sw = 1;
CC1sw = 0;
} else {
@ -1160,7 +1160,7 @@ void portamento_() {
if (biteJumper) { //PBITE (if pulled low with jumper, use pressure sensor instead of capacitive bite sensor)
biteSensor=analogRead(bitePressurePin); // alternative kind bite sensor (air pressure tube and sensor) PBITE
} else {
biteSensor = touchRead(bitePin); // get sensor data, do some smoothing - SENSOR PIN 17 - PCB PINS LABELED "BITE" (GND left, sensor pin right)
biteSensor = touchRead(bitePin); // get sensor data, do some smoothing - SENSOR PIN 17 - PCB PINS LABELED "BITE" (GND left, sensor pin right)
}
if (0 == vibControl) {
// Portamento is controlled with the bite sensor (variable capacitor) in the mouthpiece
@ -1230,7 +1230,7 @@ void portOff() {
void readTeensySwitches() { //these seem to slow things down, so do it less often
pinkyKey = (touchRead(halfPitchBendKeyPin) > touch_Thr); // SENSOR PIN 1 - PCB PIN "S1"
pinkyKey = (touchRead(halfPitchBendKeyPin) > touch_Thr); // SENSOR PIN 1 - PCB PIN "S1"
}
void readSwitches() {
@ -1248,7 +1248,7 @@ void readSwitches() {
R3 = touchKeys[R3Pin];
R4 = touchKeys[R4Pin];
R5 = touchKeys[R5Pin];
octaveR = 0;
if (R5 && R3) octaveR = 6; //R6 = R5 && R3
else if (R5) octaveR = 5; //R5