brian/xevi
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

* New quarter tone setting for Pinky Key (NuEVI) and Mod Key (NuRAD) – QTN. This makes the Pinky/Mod key a key for playing one quarter tone down using pitchbend (MIDI) or directly affecting the built in note CV output (using CV module or NuEVI CV/Plus). Pitch bend range for MIDI synth needs to be two semitones up/dn (or compensated for in pitch bend divider setting in the controller to make the resulting range two semitones up/dn). On NuRAD, it is recommended to set the 3rd LH Pinky key (EXTRA PKEY setting) to mirror MOD key for playablility.

Browse source 
* Changes to extra controller harmonics settings (experimental). Reverse direction options (ending with an ‘R’) available following the ones going up. This can be used with experimental mouthpieces where increased lip tension creates less touched sensor area.
This commit is contained in:
Johan Berglund 2021-07-09 14:38:32 +02:00
parent 35a5943998
commit c8bd07799a
8 changed files with 11525 additions and 19 deletions
Download patch file Download diff file Expand all files Collapse all files

9
user guides/notes 1.5b7.txt → user guides/notes 1.5b8.txt
View file

@ -1,4 +1,4 @@
NuEVI and NuRAD Firmware 1.5b7 Notes
NuEVI and NuRAD Firmware 1.5b8 Notes
1.5b1:
@ -62,7 +62,12 @@ Settings in GLIDE CC and LEVER CC are only used when corresponding control is se
* Support for a CME WIDI Master Bluetooth MIDI board connected to Teensy underside pads. With this mod, if present it will be powered up by touching pinky/mod key and pressing enter in MIDI meny (what previously controlled the "slow midi" function that now is replaced by the CC interval menu item). "WIDI" will be indicated in the display below the MIDI channel number and the WIDI board will be powered up. Teensy pad connections: GND to GND (blue) of WIDI, 31 (TX2) via 47 ohm resistor to signal (green) of WIDI, 33 via 47 ohm resistor to power (red) of WIDI. 27 and 28 jumpered to indicate that the WIDI is connected.
1.5b7:
* Added three new settings in EXTRAS MENU – CV TUNE, CV SCALE and CV EC LFO. The first two allow for software tuning of the CV output for 1V/Oct when using NuEVI CV, NuEVI Plus or NuEVI/NuRAD with external CV box or module. Also makes more simple versions of the CV boards possible (no potentiometers for adjustment). The CV EC LFO setting controls a new CV LFO vibrato function for the extra controller (lip sensor). It can be set to OFF (no extra controller LFO vibrato) or values 1 through 8, which represent vibrato freq from 4.5Hz to 8Hz. Default value is 3 (5.5Hz).
1.5b8:
* New quarter tone setting for Pinky Key (NuEVI) and Mod Key (NuRAD) – QTN. This makes the Pinky/Mod key a key for playing one quarter tone down using pitchbend (MIDI) or directly affecting the built in note CV output (using CV module or NuEVI CV/Plus). Pitch bend range for MIDI synth needs to be two semitones up/dn (or compensated for in pitch bend divider setting in the controller to make the resulting range two semitones up/dn). On NuRAD, it is recommended to set the 3rd LH Pinky key (EXTRA PKEY setting) to mirror MOD key for playablility.
* Changes to extra controller harmonics settings (experimental). Reverse direction options (ending with an ‘R’) available following the ones going up. This can be used with experimental mouthpieces where increased lip tension creates less touched sensor area.