brian/xevi
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Timing and breath CC rate improvements.

Browse source
This commit is contained in:
Johan Berglund 2019-10-09 09:15:15 +02:00
parent 1ef20652cc
commit fee9e04ad6
2 changed files with 24 additions and 12 deletions
Download patch file Download diff file Expand all files Collapse all files

30
NuEVI/NuEVI.ino
View file

@ -114,8 +114,11 @@ static const unsigned long pixelUpdateInterval = 80;
unsigned long lastDeglitchTime = 0; // The last time the fingering was changed
unsigned long ccSendTime = 0L; // The last time we sent CC values
unsigned long ccSendTime2 = 0L; // The last time we sent CC values 2 (slower)
unsigned long ccSendTime3 = 0L; // The last time we sent CC values 3 (and slower)
unsigned long ccBreathSendTime = 0L; // The last time we sent breath CC values
unsigned long breath_on_time = 0L; // Time when breath sensor value went over the ON threshold
unsigned long currentTime;
int lastFingering = 0; // Keep the last fingering value for debouncing
@ -486,6 +489,7 @@ void loop() {
}
if (analogRead(breathSensorPin) > (breathCalZero - 800)) programonce = false;
specialKey = (touchRead(specialKeyPin) > touch_Thr); //S2 on pcb
if (specialKeyEnable) {
if (lastSpecialKey != specialKey) {
if (specialKey) {
@ -717,23 +721,30 @@ void loop() {
if (pressureSensor > breathThrVal) cursorBlinkTime = millis(); // keep display from updating with cursor blinking if breath is over thr
}
// Is it time to send more CC data?
if (millis() - ccBreathSendTime > (CC_BREATH_INTERVAL*(slowMidi+1))){
currentTime = millis();
if (currentTime - ccBreathSendTime > (CC_BREATH_INTERVAL*(slowMidi+1))){
breath();
ccBreathSendTime = millis();
ccBreathSendTime = currentTime;
}
if (millis() - ccSendTime > CC_INTERVAL) {
if (currentTime - ccSendTime > CC_INTERVAL) {
// deal with Pitch Bend, Modulation, etc.
pitch_bend();
portamento_();
extraController();
ccSendTime = currentTime;
}
if (currentTime - ccSendTime2 > CC_INTERVAL2) {
portamento_();
readTeensySwitches();
ccSendTime2 = currentTime;
}
if (currentTime - ccSendTime3 > CC_INTERVAL3) {
doorKnobCheck();
if (((pinkySetting == LVL) || (pinkySetting == LVLP)) && pinkyKey){
// show LVL indication
} else updateSensorLEDs();
doorKnobCheck();
ccSendTime = millis();
ccSendTime3 = currentTime;
}
if (millis() - pixelUpdateTime > pixelUpdateInterval) {
if (currentTime - pixelUpdateTime > pixelUpdateInterval) {
// even if we just alter a pixel, the whole display is redrawn (35ms of MPU lockup) and we can't do that all the time
// this is one of the big reasons the display is for setup use only
drawSensorPixels(); // live sensor monitoring for the setup screens
@ -742,7 +753,7 @@ void loop() {
} else {
statusLedOn();
}
pixelUpdateTime = millis();
pixelUpdateTime = currentTime;
}
if(dacMode == DAC_MODE_PITCH) { // pitch CV from DAC and breath CV from PWM on pin 6, for filtering and scaling on separate board
@ -1192,8 +1203,7 @@ void portOff() {
void readTeensySwitches() { //these seem to slow things down, so do it less often
pinkyKey = (touchRead(halfPitchBendKeyPin) > touch_Thr); // SENSOR PIN 1 - PCB PIN "S1"
specialKey = (touchRead(specialKeyPin) > touch_Thr); //S2 on pcb
pinkyKey = (touchRead(halfPitchBendKeyPin) > touch_Thr); // SENSOR PIN 1 - PCB PIN "S1"
}
void readSwitches() {

6
NuEVI/config.h
View file

@ -5,7 +5,7 @@
// Compile options, comment/uncomment to change
#define FIRMWARE_VERSION "1.4.0" // FIRMWARE VERSION NUMBER HERE <<<<<<<<<<<<<<<<<<<<<<<
#define FIRMWARE_VERSION "1.4.1" // FIRMWARE VERSION NUMBER HERE <<<<<<<<<<<<<<<<<<<<<<<
#define ON_Delay 20 // Set Delay after ON threshold before velocity is checked (wait for tounging peak)
#define CCN_Port 5 // Controller number for portamento level
@ -14,7 +14,9 @@
// Send breath CC data no more than every CC_BREATH_INTERVAL
// milliseconds (due to timing errors, the value should be about half the actual wanted value)
#define CC_BREATH_INTERVAL 1
#define CC_INTERVAL 10
#define CC_INTERVAL 13
#define CC_INTERVAL2 25
#define CC_INTERVAL3 37
#define breathLoLimit 0