#ifndef __CONFIG_H
#define __CONFIG_H


// Compile options, comment/uncomment to change

#define FIRMWARE_VERSION "0.0.1"    // FIRMWARE VERSION NUMBER HERE <<<<<<<<<<<<<<<<<<<<<<<

#define ON_Delay   20   // Set Delay after ON threshold before velocity is checked (wait for tounging peak)
#define CCN_Port 5      // Controller number for portamento level
#define CCN_PortOnOff 65// Controller number for portamento on/off
#define START_NOTE 36 // set startNote to C (change this value in steps of 12 to start in other octaves)
#define FILTER_FREQ 30.0
#define SPIKE_FILTER_FREQ 150.0 // Detect fast changes in breath
#define ICM_FILTER_FREQ 2
#define BREATH_THR_MAX_BOOST 40.0
#define CAP_SENS_ABSOLUTE_MAX 1000 // For inverting capacitive sensors
#define PRESSURE_SENS_MULTIPLIER 10 // Multiply pressure sens so it's not a float
#define CALIBRATE_SAMPLE_COUNT 4
#define MENU_AUTO_OFF_TIME 30000


// Statup buttons
#define STARTUP_FACTORY_RESET 0x3
#define STARTUP_TEST 0x2
#define STARTUP_CONFIG 0xC
#define TEST_CONFIG 0xA
#define DEBUG_CONFIG 0x1

// Buttons
#define BTN_MENU 0x1
#define BTN_VAL1 0x2
#define BTN_VAL2 0x4
#define BTN_PRESET 0x8
#define KNOB_CURVE_THRESHOLD 180
#define KNOB_CURVE_MAX_MULTIPLIER 5
#define KNOB_DISPLAY_TIME 500

// Send breath CC data no more than every CC_BREATH_INTERVAL 
// milliseconds
#define CC_BREATH_INTERVAL 5
#define SLOW_MIDI_ADD 7
#define CC_INTERVAL_PRIMARY 9
#define CC_INTERVAL_PORT 13
#define CC_INTERVAL_OTHER 37
#define LVL_TIMER_INTERVAL 15
#define CVPORTATUNE 2

#define maxSamplesNum 120

#define BREATH_LO_LIMIT   9000
#define BREATH_HI_LIMIT   12000
#define BITE_LO_LIMIT   0
#define BITE_HI_LIMIT   1000
#define PITCHB_LO_LIMIT   -2000
#define PITCHB_HI_LIMIT   2000
#define EXTRA_LO_LIMIT   -2000
#define EXTRA_HI_LIMIT   2000
#define CTOUCH_LO_LIMIT   500
#define CTOUCH_HI_LIMIT   1000
#define LEVER_LO_LIMIT    -2000
#define LEVER_HI_LIMIT    2000
#define SPIKE_LO_LIMIT   0
#define SPIKE_HI_LIMIT   200
#define SLIDER_TOUCH_OFFSET   4

#endif