01d193c9b3
- Switched to platformio, ino -> cpp - MPRLS for pressure sensor - Added basic ICM support - Removed widi, battery, other features not supported in xEvi - Removed legacy options/processing - Added LED strip support - Added encoder support - Reworked menu code to use encoders/be more flexible
35 lines
1.3 KiB
OpenSCAD
35 lines
1.3 KiB
OpenSCAD
w=8; //key width, default 8
|
|
wc=10; //mounting end outer diameter, default 10
|
|
l=15; //key length (range normally increase in steps of 5)
|
|
hght=3; //key height, default 3,3.5 and 4
|
|
angl=25; //key end angle, default 25
|
|
estp=1.5; //end step before angle, default 0.5
|
|
noext=0; //set to 1 to get just the round part
|
|
|
|
// 20/3,26/3.5,32/4 sk: 15/3 (estp 1.5)
|
|
|
|
module prism(l, w, h){
|
|
polyhedron(
|
|
points=[[0,0,0], [l,0,0], [l,w,0], [0,w,0], [0,w,h], [l,w,h]],
|
|
faces=[[0,1,2,3],[5,4,3,2],[0,4,5,1],[0,3,4],[5,2,1]]
|
|
);
|
|
}
|
|
|
|
difference(){
|
|
translate([0,0,0]) cylinder(h=hght,r=wc/2,,$fn=100);
|
|
translate([0,0,hght-2]) cylinder(h=2.2,r1=1.6,r2=3.2,$fn=100);
|
|
translate([0,0,-1]) cylinder(h=hght+5,r=1.6,$fn=100);
|
|
//translate([-8,-8,0]) cube([16,2,3]);
|
|
|
|
}
|
|
if (!noext){
|
|
difference(){
|
|
translate([-w/2,-l+1,0]) cube([w,l,hght]);
|
|
translate([0,0,hght-2]) cylinder(h=2.2,r1=1.6,r2=3.2,$fn=100);
|
|
translate([0,0,-1]) cylinder(h=hght+5,r=1.6,$fn=100);
|
|
translate([w/2-1,-l,hght]) rotate([180,0,90]) prism(l,1,1);
|
|
translate([-w/2-0.001,-l,hght-1]) rotate([90,0,90]) prism(l,1,1);
|
|
//translate([-w/2,-l+5.5,hght]) rotate([160,0,0])prism(w,15,15);
|
|
translate([-w/2,-l,estp]) rotate([angl,0,0])cube(40,40,40);
|
|
}
|
|
}
|