brian/xevi
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
xevi/NuEVI
History
Johan Berglund b80f9247a2 Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 
BITE CTL and LEVER CTL can both be set to any of these destinations:
	OFF - no destination active for this controller
	VIB - vibrato
	GLD - glide/portamento (defined by GLIDE MOD and GLIDE LMT settings)
	CC  - custom CC output (defined in GLIDE CC and LEVER CC settings)

Settings in GLIDE CC and LEVER CC are only used when corresponding control is set to CC in its CTL setting as described above.
2020-09-04 11:32:40 +02:00
..
adjustmenu.cpp * AUTOCAL is available for each ADJUST menu page. With cursor on THR or MAX bar, press UP and DOWN buttons at the same time (and keep off the sensors being calibrated). AUTOCAL will be displayed for two seconds, then updated settings will be shown. 2020-08-21 07:49:36 +02:00
config.h Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00
FilterOnePole.cpp Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
FilterOnePole.h Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
globals.h Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00
hardware.h Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00
led.cpp Fix for SAX fingering and updated fingering chart (NuRAD). Experimental fingerings using rollers for harmonic series (NuEVI). LED indication for extra controller sensor and startup LED check and also fail check for MPR121 sensor boards (NuRAD). 2020-06-04 11:43:46 +02:00
led.h Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
menu.cpp Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00
menu.h Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00
midi.cpp Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
midi.h Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
name.c Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
NuEVI.ino Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00
numenu.cpp Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
numenu.h Added battery type setting and detailed battery info in ABOUT menu (support for NiMH and LiPo batteries). Added lip sensor activated harmonic series, with settings for range and series type. Added NuRAD overview drawing. Changes to CC lables (from 1 & 2 to A & B). 2020-04-27 11:19:08 +02:00
settings.cpp Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00
settings.h Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC. 2020-09-04 11:32:40 +02:00