b80f9247a2
BITE CTL and LEVER CTL can both be set to any of these destinations: OFF - no destination active for this controller VIB - vibrato GLD - glide/portamento (defined by GLIDE MOD and GLIDE LMT settings) CC - custom CC output (defined in GLIDE CC and LEVER CC settings) Settings in GLIDE CC and LEVER CC are only used when corresponding control is set to CC in its CTL setting as described above.
218 lines
6.7 KiB
C
218 lines
6.7 KiB
C
#ifndef __SETTINGS_H
|
|
#define __SETTINGS_H
|
|
|
|
#include <stdint.h>
|
|
|
|
// EEPROM addresses for settings
|
|
#define VERSION_ADDR 0
|
|
#define BREATH_THR_ADDR 2
|
|
#define BREATH_MAX_ADDR 4
|
|
#define PORTAM_THR_ADDR 6
|
|
#define PORTAM_MAX_ADDR 8
|
|
#define PITCHB_THR_ADDR 10
|
|
#define PITCHB_MAX_ADDR 12
|
|
#define TRANSP_ADDR 14
|
|
#define MIDI_ADDR 16
|
|
#define BREATH_CC_ADDR 18
|
|
#define BREATH_AT_ADDR 20
|
|
#define VELOCITY_ADDR 22
|
|
#define PORTAM_ADDR 24
|
|
#define PB_ADDR 26
|
|
#define EXTRA_ADDR 28
|
|
#define VIBRATO_ADDR 30
|
|
#define DEGLITCH_ADDR 32
|
|
#define EXTRAC_THR_ADDR 34
|
|
#define EXTRAC_MAX_ADDR 36
|
|
#define PATCH_ADDR 38
|
|
#define OCTAVE_ADDR 40
|
|
#define CTOUCH_THR_ADDR 42
|
|
#define BREATHCURVE_ADDR 44
|
|
#define VEL_SMP_DL_ADDR 46
|
|
#define VEL_BIAS_ADDR 48
|
|
#define PINKY_KEY_ADDR 50
|
|
#define FP1_ADDR 52
|
|
#define FP2_ADDR 54
|
|
#define FP3_ADDR 56
|
|
#define FP4_ADDR 58
|
|
#define FP5_ADDR 60
|
|
#define FP6_ADDR 62
|
|
#define FP7_ADDR 64
|
|
#define DIPSW_BITS_ADDR 66
|
|
#define PARAL_ADDR 68
|
|
#define ROTN1_ADDR 70
|
|
#define ROTN2_ADDR 72
|
|
#define ROTN3_ADDR 74
|
|
#define ROTN4_ADDR 76
|
|
#define PRIO_ADDR 78
|
|
#define VIB_SENS_ADDR 80
|
|
#define VIB_RETN_ADDR 82
|
|
#define VIB_SQUELCH_ADDR 84
|
|
#define VIB_DIRECTION_ADDR 86
|
|
#define BREATH_CC2_ADDR 88
|
|
#define BREATH_CC2_RISE_ADDR 90
|
|
#define VIB_SENS_BITE_ADDR 92
|
|
#define VIB_SQUELCH_BITE_ADDR 94
|
|
#define VIB_CONTROL_ADDR 96
|
|
#define TRILL3_INTERVAL_ADDR 98
|
|
#define DAC_MODE_ADDR 100
|
|
#define EXTRA2_ADDR 102
|
|
#define LEVEL_CC_ADDR 104
|
|
#define LEVEL_VAL_ADDR 106
|
|
#define FINGER_ADDR 108
|
|
#define LPINKY3_ADDR 110
|
|
#define BATTYPE_ADDR 112
|
|
#define HARMSET_ADDR 114
|
|
#define HARMSEL_ADDR 116
|
|
#define PARAB_ADDR 118
|
|
#define ROTB1_ADDR 120
|
|
#define ROTB2_ADDR 122
|
|
#define ROTB3_ADDR 124
|
|
#define ROTB4_ADDR 126
|
|
#define PARAC_ADDR 128
|
|
#define ROTC1_ADDR 130
|
|
#define ROTC2_ADDR 132
|
|
#define ROTC3_ADDR 134
|
|
#define ROTC4_ADDR 136
|
|
#define POLYSEL_ADDR 138
|
|
#define FWCTYPE_ADDR 140
|
|
#define HMZKEY_ADDR 150
|
|
#define FWCLCH_ADDR 152
|
|
#define FWCDP2_ADDR 154
|
|
#define HMZLIMIT_ADDR 156
|
|
#define BRINTERV_ADDR 158
|
|
#define OTFKEY_ADDR 160
|
|
#define PORTLIMIT_ADDR 162
|
|
#define LEVER_THR_ADDR 164
|
|
#define LEVER_MAX_ADDR 166
|
|
#define BRHARMSET_ADDR 168
|
|
#define BRHARMSEL_ADDR 170
|
|
#define BITECTL_ADDR 172
|
|
#define BITECC_ADDR 174
|
|
#define LEVERCTL_ADDR 176
|
|
#define LEVERCC_ADDR 178
|
|
|
|
#define EEPROM_SIZE 180 //Last address +2
|
|
|
|
|
|
//DAC output modes
|
|
#define DAC_MODE_BREATH 0
|
|
#define DAC_MODE_PITCH 1
|
|
|
|
#define DIPSW_FASTBOOT 0
|
|
#define DIPSW_LEGACY 1
|
|
#define DIPSW_LEGACYBRACT 2
|
|
#define DIPSW_SLOWMIDI 3
|
|
#define DIPSW_GATEOPEN 4
|
|
#define DIPSW_SPKEYENABLE 5
|
|
#define DIPSW_BCASMODE 6
|
|
|
|
|
|
//"factory" values for settings
|
|
#define EEPROM_VERSION 42
|
|
|
|
#define BREATH_THR_FACTORY 1400
|
|
#define BREATH_MAX_FACTORY 4000
|
|
#define PORTAM_THR_FACTORY 2600
|
|
#define PORTAM_MAX_FACTORY 3300
|
|
#define PORTPR_THR_FACTORY 1200
|
|
#define PORTPR_MAX_FACTORY 2000
|
|
#define PITCHB_THR_FACTORY 2000
|
|
#define PITCHB_MAX_FACTORY 3000
|
|
#define EXTRAC_THR_FACTORY 2800
|
|
#define EXTRAC_MAX_FACTORY 3500
|
|
#define LEVER_THR_FACTORY 1700
|
|
#define LEVER_MAX_FACTORY 1800
|
|
#define TRANSP_FACTORY 12 // 12 is 0 transpose
|
|
#define MIDI_FACTORY 1 // 1-16
|
|
#define BREATH_CC_FACTORY 2 //thats CC#2, see ccList
|
|
#define BREATH_AT_FACTORY 0 //aftertouch default off
|
|
#define VELOCITY_FACTORY 0 // 0 is dynamic/breath controlled velocity
|
|
#define PORTAM_FACTORY 2 // 0 - OFF, 1 - ON, 2 - SW
|
|
#define PB_FACTORY 1 // 0 - OFF, 1 - 12
|
|
#define EXTRA_FACTORY 1 // 0 - OFF, 1 - Modulation wheel, 2 - Foot pedal, 3 - Filter Cutoff, 4 - Sustain pedal
|
|
#define VIBRATO_FACTORY 4 // 0 - OFF, 1 - 9 depth
|
|
#define DEGLITCH_FACTORY 20 // 0 - OFF, 5 to 70 ms in steps of 5
|
|
#define PATCH_FACTORY 1 // MIDI program change 1-128
|
|
#define OCTAVE_FACTORY 3 // 3 is 0 octave change
|
|
#define CTOUCH_THR_FACTORY 125 // MPR121 touch threshold
|
|
#define BREATHCURVE_FACTORY 4 // 0 to 12 (-4 to +4, S1 to S4)
|
|
#define VEL_SMP_DL_FACTORY 20 // 0 to 30
|
|
#define VEL_BIAS_FACTORY 0 // 0 to 9
|
|
#define PINKY_KEY_FACTORY 12 // 0 - 11 (QuickTranspose -12 to -1), 12 (pb/2), 13 - 22 (QuickTranspose +1 to +12)
|
|
#define DIPSW_BITS_FACTORY 0 // virtual dip switch settings for special modes (work in progress)
|
|
#define PARAL_FACTORY 31 // 7 (+ 24) Rotator parallel
|
|
#define ROTN1_FACTORY 19 // -5 (+24) Rotation 1
|
|
#define ROTN2_FACTORY 14 // -10 (+24) Rotation 2
|
|
#define ROTN3_FACTORY 17 // -7 (+24) Rotation 3
|
|
#define ROTN4_FACTORY 10 // -14 (+24) Rotation 4
|
|
#define PRIO_FACTORY 0 // Mono priority 0 - BAS(e note), 1 - ROT(ating note)
|
|
#define VIB_SENS_FACTORY 6 // 1 least sensitive, higher more sensitive
|
|
#define VIB_RETN_FACTORY 2 // 0, no return, 1 slow return, higher faster return
|
|
#define VIB_SQUELCH_FACTORY 12 // 0 to 30, vib signal squelch
|
|
#define VIB_DIRECTION_FACTORY 0
|
|
#define BREATH_CC2_FACTORY 0 //OFF,1-127
|
|
#define BREATH_CC2_RISE_FACTORY 1
|
|
#define VIB_SENS_BITE_FACTORY 8
|
|
#define VIB_SQUELCH_BITE_FACTORY 10
|
|
#define VIB_CONTROL_FACTORY 0
|
|
#define TRILL3_INTERVAL_FACTORY 4
|
|
#define DAC_MODE_FACTORY DAC_MODE_PITCH
|
|
#define EXTRA2_FACTORY 0
|
|
#define LEVEL_CC_FACTORY 11
|
|
#define LEVEL_VAL_FACTORY 127
|
|
#define FINGER_FACTORY 0
|
|
#define LPINKY3_FACTORY 0
|
|
#define BATTYPE_FACTORY 0
|
|
#define HARMSET_FACTORY 0
|
|
#define HARMSEL_FACTORY 0
|
|
#define PARAB_FACTORY 31 // 7 (+ 24) Rotator parallel
|
|
#define ROTB1_FACTORY 19 // -5 (+24) Rotation 1
|
|
#define ROTB2_FACTORY 14 // -10 (+24) Rotation 2
|
|
#define ROTB3_FACTORY 17 // -7 (+24) Rotation 3
|
|
#define ROTB4_FACTORY 10 // -14 (+24) Rotation 4
|
|
#define PARAC_FACTORY 31 // 7 (+ 24) Rotator parallel
|
|
#define ROTC1_FACTORY 19 // -5 (+24) Rotation 1
|
|
#define ROTC2_FACTORY 14 // -10 (+24) Rotation 2
|
|
#define ROTC3_FACTORY 17 // -7 (+24) Rotation 3
|
|
#define ROTC4_FACTORY 10 // -14 (+24) Rotation 4
|
|
#define POLYSEL_FACTORY 0
|
|
#define FWCTYPE_FACTORY 0
|
|
#define HMZKEY_FACTORY 0
|
|
#define FWCLCH_FACTORY 0
|
|
#define FWCDP2_FACTORY 0
|
|
#define HMZLIMIT_FACTORY 5
|
|
#define BRINTERV_FACTORY 6
|
|
#define OTFKEY_FACTORY 0
|
|
#define PORTLIMIT_FACTORY 127
|
|
#define BRHARMSET_FACTORY 0
|
|
#define BRHARMSEL_FACTORY 0
|
|
#define BITECTL_FACTORY 2 // GLD
|
|
#define LEVERCTL_FACTORY 1 // VIB
|
|
#define BITECC_FACTORY 1 //Mod Wheel
|
|
#define LEVERCC_FACTORY 11 //Expression
|
|
|
|
#define NO_CHECKSUM 0x7F007F00
|
|
|
|
void readEEPROM(const bool factoryReset);
|
|
void setBit(uint16_t &bitfield, const uint8_t pos, const uint16_t value);
|
|
uint16_t readSetting(const uint16_t address);
|
|
void writeSetting(const uint16_t address, const uint16_t value);
|
|
uint16_t readSettingBounded(const uint16_t address, const uint16_t min, const uint16_t max, const uint16_t defaultValue);
|
|
|
|
//Functions for config management mode
|
|
void sendSysexSettings();
|
|
void sendSysexMessage(const char* messageCode);
|
|
void sendSysexVersion();
|
|
|
|
void handleSysex(uint8_t *data, unsigned int length);
|
|
void handleSysexChunk(const uint8_t *data, uint16_t length, bool last);
|
|
|
|
uint32_t crc32(const uint8_t *message, const size_t length);
|
|
|
|
void configInitScreen();
|
|
void configShowMessage(const char* message);
|
|
|
|
void configModeSetup();
|
|
void configModeLoop();
|
|
|
|
#endif
|