Johan Berglund 27071c44bd * Added three new settings in EXTRAS MENU – CV TUNE, CV SCALE and CV EC LFO. The first two allow for software tuning of the CV output for 1V/Oct when using NuEVI CV, NuEVI Plus or NuEVI/NuRAD with external CV box or module. Also makes more simple versions of the CV boards possible (no potentiometers for adjustment). The CV EC LFO setting controls a new CV LFO vibrato function for the extra controller (lip sensor). It can be set to OFF (no extra controller LFO vibrato) or values 1 through 8, which represent vibrato freq from 4.5Hz to 8Hz. Default value is 3 (5.5Hz).		2021-02-20 15:35:01 +01:00
..
NuEVI-polyplay-beta3.ino.hex	For NuRAD: Fix for SAX fingering (LH2+RH2 now plays Bb). Added Gate Hold functionality from NuEVI, using thumb folded in over R2 through R5 in place of the "doorknob" grip on the EVI. For NuRAD and NuEVI: New POLY PLAY functionality with a number of harmonizer settings and additional rotator setups.	2020-07-19 13:52:06 +02:00
NuEVI-pp-brcc-beta4.ino.hex	NuEVI and NuRAD: Timing and speed issue solved - SSD1306 display library needed editing to prevent it from lowering I2C bus speed. Added setting to enable/disable the on the fly key switching. NuRAD: Changed touch sensor reading equalisation from offset to multiplier to improve coherence of readings.	2020-07-22 13:24:56 +02:00
NuEVI-v15b1.ino.hex	Added automatic sensor calibration performed at factory reset. Changed some default values for settings.	2020-07-23 13:41:13 +02:00
NuEVI-v15b2.ino.hex	* Adjustment setting for thumb lever (for optimizing thumb portamento control). By setting THR (level of push force to activate) and MAX (level of push force to achieve maximum set portamento) values close to eachother at the desired point of activation, the new glide limit setting to desired rate will create a switching type set rate controller (similar to Crumar EVI glide key). With THR and MAX setup with separation to taste, a continous control up to level set by glide limit is achieved.	2020-08-19 23:07:38 +02:00
NuEVI-v15b3.ino.hex	* AUTOCAL is available for each ADJUST menu page. With cursor on THR or MAX bar, press UP and DOWN buttons at the same time (and keep off the sensors being calibrated). AUTOCAL will be displayed for two seconds, then updated settings will be shown.	2020-08-21 07:49:36 +02:00
NuEVI-v15b4.ino.hex	Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC.	2020-09-04 11:32:40 +02:00
NuEVI-v15b5.ino.hex	* Changed names for ADJUST page titles (to shorten) and added numerical value readouts for THR and MAX settings.	2020-10-10 19:02:25 +02:00
NuEVI-v15b6.ino.hex	Latest beta (1.5b6) hex files with notes. New overview pdfs.	2021-01-01 13:25:46 +01:00
NuEVI-v15b7.ino.hex	* Added three new settings in EXTRAS MENU – CV TUNE, CV SCALE and CV EC LFO. The first two allow for software tuning of the CV output for 1V/Oct when using NuEVI CV, NuEVI Plus or NuEVI/NuRAD with external CV box or module. Also makes more simple versions of the CV boards possible (no potentiometers for adjustment). The CV EC LFO setting controls a new CV LFO vibrato function for the extra controller (lip sensor). It can be set to OFF (no extra controller LFO vibrato) or values 1 through 8, which represent vibrato freq from 4.5Hz to 8Hz. Default value is 3 (5.5Hz).	2021-02-20 15:35:01 +01:00
NuEVI-v146.ino.hex	New version documentation.	2020-04-27 11:21:36 +02:00
NuEVI-v147.ino.hex	Fix for SAX fingering and updated fingering chart (NuRAD). Experimental fingerings using rollers for harmonic series (NuEVI). LED indication for extra controller sensor and startup LED check and also fail check for MPR121 sensor boards (NuRAD).	2020-06-04 11:43:46 +02:00
NuRAD-polyplay-beta3.ino.hex	For NuRAD: Fix for SAX fingering (LH2+RH2 now plays Bb). Added Gate Hold functionality from NuEVI, using thumb folded in over R2 through R5 in place of the "doorknob" grip on the EVI. For NuRAD and NuEVI: New POLY PLAY functionality with a number of harmonizer settings and additional rotator setups.	2020-07-19 13:52:06 +02:00
NuRAD-pp-brcc-toucheq-beta4.ino.hex	NuEVI and NuRAD: Timing and speed issue solved - SSD1306 display library needed editing to prevent it from lowering I2C bus speed. Added setting to enable/disable the on the fly key switching. NuRAD: Changed touch sensor reading equalisation from offset to multiplier to improve coherence of readings.	2020-07-22 13:24:56 +02:00
NuRAD-v15b1.ino.hex	Added automatic sensor calibration performed at factory reset. Changed some default values for settings.	2020-07-23 13:41:13 +02:00
NuRAD-v15b2.ino.hex	* Adjustment setting for thumb lever (for optimizing thumb portamento control). By setting THR (level of push force to activate) and MAX (level of push force to achieve maximum set portamento) values close to eachother at the desired point of activation, the new glide limit setting to desired rate will create a switching type set rate controller (similar to Crumar EVI glide key). With THR and MAX setup with separation to taste, a continous control up to level set by glide limit is achieved.	2020-08-19 23:07:38 +02:00
NuRAD-v15b3.ino.hex	* AUTOCAL is available for each ADJUST menu page. With cursor on THR or MAX bar, press UP and DOWN buttons at the same time (and keep off the sensors being calibrated). AUTOCAL will be displayed for two seconds, then updated settings will be shown.	2020-08-21 07:49:36 +02:00
NuRAD-v15b4.ino.hex	Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC.	2020-09-04 11:32:40 +02:00
NuRAD-v15b5.ino.hex	* Changed names for ADJUST page titles (to shorten) and added numerical value readouts for THR and MAX settings.	2020-10-10 19:02:25 +02:00
NuRAD-v15b6.ino.hex	Latest beta (1.5b6) hex files with notes. New overview pdfs.	2021-01-01 13:25:46 +01:00
NuRAD-v15b7.ino.hex	* Added three new settings in EXTRAS MENU – CV TUNE, CV SCALE and CV EC LFO. The first two allow for software tuning of the CV output for 1V/Oct when using NuEVI CV, NuEVI Plus or NuEVI/NuRAD with external CV box or module. Also makes more simple versions of the CV boards possible (no potentiometers for adjustment). The CV EC LFO setting controls a new CV LFO vibrato function for the extra controller (lip sensor). It can be set to OFF (no extra controller LFO vibrato) or values 1 through 8, which represent vibrato freq from 4.5Hz to 8Hz. Default value is 3 (5.5Hz).	2021-02-20 15:35:01 +01:00
NuRAD-v146.ino.hex	Quick fix... octave setting missing from fingered note calculation for NuRAD	2020-05-17 17:08:22 +02:00
NuRAD-v147.ino.hex	Fix for SAX fingering and updated fingering chart (NuRAD). Experimental fingerings using rollers for harmonic series (NuEVI). LED indication for extra controller sensor and startup LED check and also fail check for MPR121 sensor boards (NuRAD).	2020-06-04 11:43:46 +02:00