Johan Berglund
27071c44bd
* Added three new settings in EXTRAS MENU – CV TUNE, CV SCALE and CV EC LFO. The first two allow for software tuning of the CV output for 1V/Oct when using NuEVI CV, NuEVI Plus or NuEVI/NuRAD with external CV box or module. Also makes more simple versions of the CV boards possible (no potentiometers for adjustment). The CV EC LFO setting controls a new CV LFO vibrato function for the extra controller (lip sensor). It can be set to OFF (no extra controller LFO vibrato) or values 1 through 8, which represent vibrato freq from 4.5Hz to 8Hz. Default value is 3 (5.5Hz).
2021-02-20 15:35:01 +01:00
Johan Berglund
4cb72f1112
Latest beta (1.5b6) hex files with notes. New overview pdfs.
2021-01-01 13:25:46 +01:00
Johan Berglund
bc545cccc1
* Changed names for ADJUST page titles (to shorten) and added numerical value readouts for THR and MAX settings.
...
* Corrected start position for rotators and added reset to first position when activated and on roller release (from top five octaves like for the otf key change).
* Adjusted NiMH voltage level
2020-10-10 19:02:25 +02:00
Johan Berglund
b80f9247a2
Added compile option to include a MPR121 board adress scanning function for troubleshooting (MENU button at startup). Changed the destination setup for bite and lever to be less confusing and more powerful (custom CCs now possible). The VIB CTL item in the VIBRATO menu is now removed, and in SETUP CTL menu you will find BITE CTL, BITE CC, LEVER CTL and LEVER CC.
...
BITE CTL and LEVER CTL can both be set to any of these destinations:
OFF - no destination active for this controller
VIB - vibrato
GLD - glide/portamento (defined by GLIDE MOD and GLIDE LMT settings)
CC - custom CC output (defined in GLIDE CC and LEVER CC settings)
Settings in GLIDE CC and LEVER CC are only used when corresponding control is set to CC in its CTL setting as described above.
2020-09-04 11:32:40 +02:00
Johan Berglund
b9a8742fc1
NuEVI and NuRAD: Timing and speed issue solved - SSD1306 display library needed editing to prevent it from lowering I2C bus speed. Added setting to enable/disable the on the fly key switching. NuRAD: Changed touch sensor reading equalisation from offset to multiplier to improve coherence of readings.
2020-07-22 13:24:56 +02:00
Johan Berglund
cc188f2196
For NuRAD: Fix for SAX fingering (LH2+RH2 now plays Bb). Added Gate Hold functionality from NuEVI, using thumb folded in over R2 through R5 in place of the "doorknob" grip on the EVI. For NuRAD and NuEVI: New POLY PLAY functionality with a number of harmonizer settings and additional rotator setups.
2020-07-19 13:52:06 +02:00
Johan Berglund
c7c1825b62
Fix for SAX fingering and updated fingering chart (NuRAD). Experimental fingerings using rollers for harmonic series (NuEVI). LED indication for extra controller sensor and startup LED check and also fail check for MPR121 sensor boards (NuRAD).
2020-06-04 11:43:46 +02:00
Johan Berglund
5791cbbe39
New version documentation.
2020-04-27 11:21:36 +02:00
Johan Berglund
85028a3627
Added hex files, user guides and fingering charts.
2020-03-24 14:00:44 +01:00
