Johan Berglund 4decdf1d72 Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).		2019-12-11 16:12:01 +01:00
..
adjustmenu.cpp	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
config.h	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
FilterOnePole.cpp	Incorporate Filters code into NuEVI repo for smoother setup.	2019-07-27 16:58:34 +02:00
FilterOnePole.h	Incorporate Filters code into NuEVI repo for smoother setup.	2019-07-27 16:58:34 +02:00
globals.h	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
hardware.h	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
led.cpp	Added secondary CC for extra controller and a Level CC control (stored), both with new settings for pinky key. New pinky settings: "EC2" sends on/off (127/0) for extra ctr CC2. "ECS" uses pinky key as switch between sending primary and secondary CC with extra controller. "LVL" lights up breath and portamento LEDs to indicate level (breath LED on full is max level, portamento LED full is min level), and level can be adjusted with K5 (up) and K1 (down). "LVP" is the same as "LVL", but with stored level transmitted at power up.	2019-08-21 08:44:22 +02:00
led.h	Added secondary CC for extra controller and a Level CC control (stored), both with new settings for pinky key. New pinky settings: "EC2" sends on/off (127/0) for extra ctr CC2. "ECS" uses pinky key as switch between sending primary and secondary CC with extra controller. "LVL" lights up breath and portamento LEDs to indicate level (breath LED on full is max level, portamento LED full is min level), and level can be adjusted with K5 (up) and K1 (down). "LVP" is the same as "LVL", but with stored level transmitted at power up.	2019-08-21 08:44:22 +02:00
menu.cpp	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
menu.h	Use wiring.h with proper case, so building hopefully works on Linux	2019-08-07 17:36:41 +02:00
midi.cpp	Rename midi value conversion functions to something that possibly makes more sense	2019-08-15 08:04:14 +02:00
midi.h	Rename midi value conversion functions to something that possibly makes more sense	2019-08-15 08:04:14 +02:00
name.c	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
NuEVI.ino	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
numenu.cpp	Menu selection is now data driven	2019-06-23 17:14:17 +02:00
numenu.h	Final push to unify all menu states	2019-06-23 17:14:18 +02:00
settings.cpp	Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).	2019-12-11 16:12:01 +01:00
settings.h	Merge branch 'master' into sysex	2019-08-26 16:09:32 +02:00