Johan Berglund
|
4decdf1d72
|
Now it's also NuRAD firmware! Set define for compile option NURAD in hardware.h to switch. Added a new little thing for NuEVI too: releasing the rollers leaves octave in current one instead of going to bottom octave unless coming down from first roller. This is helpful against bass hum from filter leak when setting the EVI aside, using pitch CV from NuEVI and synth with no VCA in use or gate open (drone mode).
|
2019-12-11 16:12:01 +01:00 |
|
Johan Berglund
|
858bcb359e
|
Hopefully I've managed to get all the legacy control stuff right this time.
|
2019-10-23 19:21:37 +02:00 |
|
Johan Berglund
|
bf125a3dd6
|
Fix to get the new pitchlatched patch change the same values as the other legacy ones.
|
2019-10-22 20:07:30 +02:00 |
|
Johan Berglund
|
32981cb992
|
Fix for negative breath activated controls.
|
2019-10-22 19:33:08 +02:00 |
|
Johan Berglund
|
8c1a7444c6
|
Changed LVL/GLD controls to K6 (increase) and K5 (decrease) to lessen risk of accidental change. LED indicator fix for pinky portamento.
|
2019-10-20 15:59:50 +02:00 |
|
Johan Berglund
|
58d7584f87
|
Added static glide/portamento control as pinky key setting. Use LEVEL control to set glide time.
|
2019-10-20 14:16:10 +02:00 |
|
Johan Berglund
|
053b954936
|
Added new dual trill functionality (contribution from Nyle) for third trill key allowing it to do both 3 semitones up and 4 semitones up. The alternate value is triggered by touching K3 and K7 (third trill key) at the same time. Third trill setting decides which interval is the standard "non-combo" one. Inspired by this combo thing, I also added an alternate way of doing lecacy style direct patch selection. Latch a note value using pinky key, then touch K1/K5 combo to send program change to that note value, or K2/K6 combo to send high and low numbers (108 to 127 and 0 to 36).
|
2019-10-20 12:25:24 +02:00 |
|
John Stäck
|
049cb6d434
|
Avoid floating-point math for vibrato calculations
|
2019-10-16 15:54:11 +02:00 |
|
John Stäck
|
cb7a4a8b88
|
No need for volatile copies of these variables.
|
2019-10-16 15:49:52 +02:00 |
|
John Stäck
|
0cbb6bde78
|
Explicitly initialize variables, use "bool-specific" values when setting.
|
2019-10-16 15:30:49 +02:00 |
|
John Stäck
|
7c1aa2c0a4
|
touchValue never used here, no point in reading touch data.
|
2019-10-16 15:28:23 +02:00 |
|
John Stäck
|
f36129d4bb
|
Make IntervalTimer stub so simulator works
|
2019-10-16 15:28:01 +02:00 |
|
John Stäck
|
88b38b3f46
|
Remove trailing whitespace
|
2019-10-16 15:07:10 +02:00 |
|
Johan Berglund
|
cd91e6eece
|
Found culprit in long lags issue in doorKnobCheck function. Reading keys again for that was not very clever... Fixed! Still want some more speed for main loop though. Now getting 6-7 ms. Had 5 ms back in 1.3.5 release. Removed scaling/curve for DAC and PWM DAC CV output. Instead made them FAST using timed interrupts. Now updates every 500 microseconds, allowing for audio rate modulation of CV on these outputs by humming into mouthpiece, just like with direct analog CV from sensor.
|
2019-10-15 16:43:54 +02:00 |
|
Johan Berglund
|
fee9e04ad6
|
Timing and breath CC rate improvements.
|
2019-10-09 09:15:15 +02:00 |
|
Johan Berglund
|
7449b04725
|
Send extra controller CC2 even if CC1 is off.
|
2019-09-12 18:47:56 +02:00 |
|
Johan Berglund
|
a141434952
|
Octave setting had stopped working. Corrected.
|
2019-09-11 07:25:38 +02:00 |
|
John Stäck
|
75ee097857
|
Merge branch 'master' into sysex
|
2019-08-26 16:09:32 +02:00 |
|
Johan Berglund
|
bab51190e1
|
Fix for bite vibrato sensitivity. Added increased range of sensitivity settings. Added possibility to use both bite and lever for vibrato at the same time. Separate timing interval for breath (trying to get speed up again). Moved Teensy touch sense calls for pinky key and special key to function less often called (every standard CC interval). Changed menu name VEL BIAS to VEL BOOST which is a more accurate description.
|
2019-08-25 12:38:02 +02:00 |
|
Johan Berglund
|
8ad8803c57
|
Added AT (aftertouch) instead of OFF for Level control.
|
2019-08-21 18:33:09 +02:00 |
|
Johan Berglund
|
d5506ff2b9
|
Added secondary CC for extra controller and a Level CC control (stored), both with new settings for pinky key. New pinky settings: "EC2" sends on/off (127/0) for extra ctr CC2. "ECS" uses pinky key as switch between sending primary and secondary CC with extra controller. "LVL" lights up breath and portamento LEDs to indicate level (breath LED on full is max level, portamento LED full is min level), and level can be adjusted with K5 (up) and K1 (down). "LVP" is the same as "LVL", but with stored level transmitted at power up.
|
2019-08-21 08:44:22 +02:00 |
|
Johan Berglund
|
fcf3bf2e17
|
Adjust bite vibrato sensitivity range.
|
2019-08-20 09:19:52 +02:00 |
|
John Stäck
|
9e76cfbdde
|
Upper bound on length of version string for sysex message
|
2019-08-15 08:04:41 +02:00 |
|
John Stäck
|
660d6583b3
|
Rename midi value conversion functions to something that possibly makes more sense
|
2019-08-15 08:04:14 +02:00 |
|
John Stäck
|
186be9ceb6
|
Proper bounds for breath cc value
|
2019-08-15 07:53:04 +02:00 |
|
John Stäck
|
fc36e5939b
|
Add "magic" CRC value that skips verification (for testing purposes)
|
2019-08-09 08:19:02 +02:00 |
|
John Stäck
|
e264b01dfd
|
Use wiring.h with proper case, so building hopefully works on Linux
|
2019-08-07 17:36:41 +02:00 |
|
John Stäck
|
1e9b470619
|
Actually match teensy/arduino signatures
|
2019-08-04 11:20:17 +02:00 |
|
John Stäck
|
8e6effaa41
|
no printf() in teensy code
|
2019-08-04 10:53:54 +02:00 |
|
John Stäck
|
1cdface168
|
Handle receiving of sysex conig data
|
2019-08-04 10:51:48 +02:00 |
|
John Stäck
|
72b305830f
|
Add facility to receive config via sysex
|
2019-07-30 11:55:20 +02:00 |
|
John Stäck
|
075905f7ea
|
Take exception to exceptions to handle argparser errors and help
|
2019-07-29 17:23:38 +02:00 |
|
John Stäck
|
2741ff5a27
|
Config management mode, to send/receive config via usb midi sysex
|
2019-07-29 17:05:10 +02:00 |
|
John Stäck
|
db4e4ac2f7
|
Needs more whitespace
|
2019-07-28 14:50:31 +02:00 |
|
John Stäck
|
4966a7ea42
|
Incorporate Filters code into NuEVI repo for smoother setup.
|
2019-07-27 16:58:34 +02:00 |
|
John Stäck
|
c6ad2b6c53
|
Init variables to avoid (incorrect) compiler warnings
|
2019-07-27 13:32:39 +02:00 |
|
John Stäck
|
3ae4147d7e
|
Move all the LED things to a separate file, as mentioned in comments
|
2019-07-27 00:42:27 +02:00 |
|
John Stäck
|
3903ec7b98
|
Mistakes were made
|
2019-07-27 00:20:01 +02:00 |
|
John Stäck
|
a5385a9ec1
|
Wrap status led usage in neat functions
|
2019-07-27 00:06:52 +02:00 |
|
John Stäck
|
6f976ea14d
|
Use proper 3rd trill value for readTrills()
|
2019-07-27 00:02:25 +02:00 |
|
John Stäck
|
e04a14ef95
|
Simplify readSwitches()
|
2019-07-26 23:42:08 +02:00 |
|
John Stäck
|
25d22fc42f
|
Make (almost) all EEPROM settings read be bounded, and rewritten if "out of bounds"
|
2019-07-25 11:58:09 +02:00 |
|
John Stäck
|
c8e96343d0
|
Move EEPROM read/write functions to settings
|
2019-07-25 11:07:41 +02:00 |
|
John Stäck
|
9fbfde3867
|
Force flags from dipSw to "nice 1-bit values" to prevent menus from locking up
|
2019-07-25 09:24:58 +02:00 |
|
John Stäck
|
16e9bd0407
|
Define constant for "dipswitch" positions
|
2019-07-25 09:09:00 +02:00 |
|
John Stäck
|
ae41482351
|
Move all EEPROM stuff into settings file
Refactor version upgrade logic
Add some new settings values
|
2019-07-25 08:50:54 +02:00 |
|
John Stäck
|
def0dcacd0
|
Remove global var for wireless power, add wl channel menu
|
2019-07-25 08:48:28 +02:00 |
|
John Stäck
|
33bfc9ea08
|
Use settings flag for DAC output mode (remove CVSCALEBOARD define)
|
2019-07-25 08:48:28 +02:00 |
|
John Stäck
|
671dfe9b2c
|
Define constant for "dipswitch" positions
|
2019-07-25 08:47:58 +02:00 |
|
John Stäck
|
7b179d4343
|
Add settings for fast boot, bcas mode, 3rd trill, dac out
|
2019-07-25 08:47:58 +02:00 |
|